Skip to content

3D printed version of a Sensor.Community Air Sensor enclosure.

License

Notifications You must be signed in to change notification settings

basilfx/Sensor-Community-Enclosure

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

16 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Sensor Community Enclosure

3D printed version of a Sensor.Community Air Sensor enclosure.

Introduction

This repository contains the parts and assembly instructions for creating my version of the Sensor.Community Air Sensor. This sensor uses a relativly cheap PM2.5/PM10 sensor, to measure the air quality. This data is then shared with Sensor.Community and other instances, to keep track of the (local) air quality.

Sensor enclosure overview. Sensor outtake holes. Sensor intake bracket. Inside the sensor.

Features

  • 3D printed parts (for the specific enclosure I used, +/- 80x120 mm)
  • Rigid mounting with additional weatherproofing
  • Air quality, temperature and GPS (location and altitude)

Contents

  • The 3d/ folder contains a 3D-printable designs for the necessary parts.
  • The firmware/ folder contains a compiled version of the Airrohr firmware I used (added for archiving reasons).
  • The images/ folder contains several pictures of the assembled sensor.

Instructions

Printing, assembly and flashing instructions can be found in Instructions.md.

License

The work in this repository is covered by CC BY-NC-SA 4.0. See the LICENSE.md file for more information.

Some parts of this project are covered by a different license.