1.3.3.0-12

• Applied several changes included in the latest kernel
  • fix endianness issue in aqc111_change_mtu
  • cleanup mtu related logic
  • Fix out-of-bounds accesses in RX fixup
• Supported platforms based on version 5.10 kernels

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  • sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Selecting a proper version is needed depending on your DSM version.
  • DSM 7.2 and above
    • use packages with the suffix _7.2.
  • DSM 7.0 and DSM 7.1
    • use packages with the suffix _7.1.
  • DSM 6.2.x
    • use packages with the suffix _6.2.

1.3.3.0-11

• Improved error handling for loading settings when using DHCP.
• Added experimental support of DSM 7.2beta. (not tested)
• Added experimental support of DSM 6.2 again for limited platforms. (not tested)

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  • sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Selecting a proper version is needed depending on your DSM version.
  • DSM 7.2 and above
    • use packages with the suffix _7.2.
  • DSM 7.0 and DSM 7.1
    • use packages with the suffix _7.1.
  • DSM 6.2.x
    • use packages with the suffix _6.2.

1.3.3.0-10 DSM-7.x (reuploaded)

• Improved the workaround for the issue of not restoring IP configuration on boot introduced in DSM 7.1.1.
  • This change also fixes the issue of the "need to repair loop" occurring in some environments.

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use past releases.

1.3.3.0-9 DSM-7.x (reuploaded)

• Fixed the issue that IP settings are not restored on boot introduced in DSM 7.1.1.
• Disabled USB autosuspend by default to improve stability for some platforms.
• Logs are now stored under /var/packages/aqc111/var/log.
• Changed to skip creating an OVS interface when the target interface was already configured.

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use past releases.

1.3.3.0-8 DSM-7.x

• Fixed the issue when bond and other devices exist.
• Improved handling of hotplug events.

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use past releases.

1.3.3.0-7 DSM-7.x

• Fixed install-udev-rules.
• Fixed startup issue introduced from 1.3.3.0-6.
  • Fixed the issue when tun devices exist and refactored the startup script.

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use past releases.

1.3.3.0-6 DSM-7.x

This driver includes changes that automatically apply some settings reported to improve driver stability in the forums.

• Enabled the Low Power 5G flag by default and supported changing the default value of flags.
  • To change default value, edit /var/packages/aqc111/etc/flags-*.
• Configure min_free_kbytes to 512M automatically.
• Updated usbnet.c to 4.4.302 for platforms using the 4.4.x kernel.
• (beta) Supported hot plug.
  • To enable the hot plug feature, After successful installation of the driver, execute the following command: sudo bash /var/packages/aqc111/scripts/install-udev-rules
  • If you update the package, you may need to run this command again.
• Changed storage location of IP addresses to etc in the package home directory.

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use past releases.

1.3.3.0-5 DSM-7.x

• Init support of openvswitch. by @riverscn in bb-qq/r8152#134
• Improved wait procedure for device detection. This change is expected to fix the issue device is not detected at DSM startup.

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use past releases.

1.3.3.0-4 DSM 7.x

Fixed a issue that prevented installation on ARM-based platforms.

Note:

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use past releases.

1.3.3.0-3 DSM7.x

Added support for DSM7 and some platforms.

• The installation will fail the first time. After that, run the following command from the SSH terminal:
  sudo install -m 4755 -o root -D /var/packages/aqc111/target/aqc111/spk_su /opt/sbin/spk_su
• Users of DSM 6.2 should use the previous version.