Skip to content

Latest commit

 

History

History
131 lines (111 loc) · 3.69 KB

README.md

File metadata and controls

131 lines (111 loc) · 3.69 KB
Raw

kernel

Kernel for the beagleboard.org boards

usage

3.12 patchset:

git checkout origin/3.12 -b 3.12
./patch.sh

To build it:

cd kernel
cp ../configs/beaglebone .config
make ARCH=arm LOADADDR=0x80008000 uImage dtbs
make ARCH=arm LOADADDR=0x80008000 modules

copy over zImage, uImage, am335x-bone.dtb, and am335x-boneblack.dtb to /boot (on the large ext4 partition) install modules in /lib/modules/ (on the large ext4 partition)

Status

  • I2C: working
  • SPI: working
  • MMC: mmc1 working, mmc2 working
  • USB host: working
  • USB gadget: working: usb eth, usb drive, CDC ACM
  • HDMI: working
  • LCDC: lcd3/lcd4/lcd7/dvi: untested
  • TS: untested
  • ADC: untested
  • PWM: untested
  • PMIC: untested
  • PMIC PWM: untested
  • CPUfreq: working: https://github.com/beagleboard/kernel/commit/f803c5b206df66683046d2d6f5be545168faf85a
  • Capes: untested
  • AUDIO: untested
  • PowerDown: broken, device remains on after [halt]

Bootlog (needs update)

U-Boot 2013.04-dirty (Jun 19 2013 - 09:57:14)

I2C:   ready
DRAM:  512 MiB
WARNING: Caches not enabled
NAND:  No NAND device found!!!
0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment

musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Peripheral mode controller at 47401000 using PIO, IRQ 0
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
USB Host mode controller at 47401800 using PIO, IRQ 0
Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot:  0
gpio: pin 53 (gpio 53) value is 1
mmc0 is current device
micro SD card found
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 0
reading uEnv.txt
14 bytes read in 3 ms (3.9 KiB/s)
Loaded environment from uEnv.txt
Importing environment from mmc ...
gpio: pin 55 (gpio 55) value is 1
4403664 bytes read in 761 ms (5.5 MiB/s)
gpio: pin 56 (gpio 56) value is 1
24692 bytes read in 29 ms (831.1 KiB/s)
Booting from mmc ...
## Booting kernel from Legacy Image at 80007fc0 ...
   Image Name:   Linux-3.12.0-00080-g12cbe01
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4403600 Bytes = 4.2 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 80f80000
   Booting using the fdt blob at 0x80f80000
   XIP Kernel Image ... OK
OK
   Using Device Tree in place at 80f80000, end 80f89073

Starting kernel ...

[    0.284222] bone-capemgr bone_capemgr.6: slot #0: No cape found
[    0.328219] bone-capemgr bone_capemgr.6: slot #1: No cape found
[    0.372218] bone-capemgr bone_capemgr.6: slot #2: No cape found
[    0.416218] bone-capemgr bone_capemgr.6: slot #3: No cape found
[    0.432399] musb-hdrc musb-hdrc.0.auto: Falied to request rx1.
[    0.443835] musb-hdrc musb-hdrc.1.auto: Falied to request rx1.
[    7.081317] bone-capemgr bone_capemgr.6: failed to load firmware 'BB-BONE-EMMC-2G-00A0.dtbo'
[    7.090417] bone-capemgr bone_capemgr.6: loader: failed to load slot-4 BB-BONE-EMMC-2G:00A0 (prio 1)

.---O---.
|       |                  .-.           o o
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution beaglebone ttyO0

Angstrom v2012.12 - Kernel 3.12.0-00080-g12cbe01

beaglebone login: