No Printer Attached - SKR 1.4 Turbo and TFT35-E3 V3.0

[DevilsDJ1990]

Hi I am using the SKR 1.4 Turbo and TFT.35 E3 V3 and Im having the same issue. I am currently making a custom machine of my design and was wondering a lot about what board to use - Lerdge K or this one and decided on this one.
I am a total noob at programming , this was my first attempt at Marlin , so far I've only been using the stock firmware's on my printers.
So far I've tryed serial ports 0/-1 , -1/0 , baudrate 115200 , 250000 making sure its the same on both TFT and board. I installed a few different versions on the TFT and I think I am using the latest one now , also using marlin 2.07

Forgot to mention in Marlin mode everything works (now after 10 hours ) but still No Printer Attached on TFT mode.

Im attaching my config files for board and TFT(or at least I think this was the last one I used)

Just now downloaded this https://github.com/radek8/BIGTREETECH-TouchScreenFirmware , and put from folder "Copy to SD CARD" - config.ini , BIGTREE_TFT35_V3.0_E3.26.x.bin , language_en.ini , and the TFT35 folder from THEME_Unified Menu Material theme to and SD card and inserted it on the TFT waited to do it's thing , put cables and original pin locations and still nothing.

Marlin and TFT config.zip

[DevilsDJ1990]

The config.ini in the zip file might be different from the one currently on , since I made the zip before doing the "Just now downloaded this https://github.com/radek8/BIGTREETECH-TouchScreenFirmware , and put from folder "Copy to SD CARD" - config.ini , BIGTREE_TFT35_V3.0_E3.26.x.bin , language_en.ini , and the TFT35 folder from THEME_Unified Menu Material theme to and SD card and inserted it on the TFT waited to do it's thing , put cables and original pin locations and still nothing."

[DevilsDJ1990]

Found a solution , using the UART3 RX and TX pins instead of the stock ones. More on the solution in this thread bigtreetech/BIGTREETECH-TFT35-V3.0#120