Permalink
Fetching contributors…
Cannot retrieve contributors at this time
2076 lines (1845 sloc) 75.6 KB
# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
# Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
[m4_warning([this file was generated for autoconf 2.69.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
dnl ---------------------------------------------------------------------------
dnl Author: wxWidgets development team,
dnl Francesco Montorsi,
dnl Bob McCown (Mac-testing)
dnl Creation date: 24/11/2001
dnl RCS-ID: $Id: wxwin.m4-2.9,v 1.1 2010/02/16 01:21:29 dirtyepic Exp $
dnl ---------------------------------------------------------------------------
dnl ===========================================================================
dnl Table of Contents of this macro file:
dnl -------------------------------------
dnl
dnl SECTION A: wxWidgets main macros
dnl - WX_CONFIG_OPTIONS
dnl - WX_CONFIG_CHECK
dnl - WXRC_CHECK
dnl - WX_STANDARD_OPTIONS
dnl - WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
dnl - WX_DETECT_STANDARD_OPTION_VALUES
dnl
dnl SECTION B: wxWidgets-related utilities
dnl - WX_LIKE_LIBNAME
dnl - WX_ARG_ENABLE_YESNOAUTO
dnl - WX_ARG_WITH_YESNOAUTO
dnl
dnl SECTION C: messages to the user
dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG
dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_END
dnl - WX_BOOLOPT_SUMMARY
dnl
dnl The special "WX_DEBUG_CONFIGURE" variable can be set to 1 to enable extra
dnl debug output on stdout from these macros.
dnl ===========================================================================
dnl ---------------------------------------------------------------------------
dnl Macros for wxWidgets detection. Typically used in configure.in as:
dnl
dnl AC_ARG_ENABLE(...)
dnl AC_ARG_WITH(...)
dnl ...
dnl WX_CONFIG_OPTIONS
dnl ...
dnl ...
dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1])
dnl if test "$wxWin" != 1; then
dnl AC_MSG_ERROR([
dnl wxWidgets must be installed on your system
dnl but wx-config script couldn't be found.
dnl
dnl Please check that wx-config is in path, the directory
dnl where wxWidgets libraries are installed (returned by
dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
dnl equivalent variable and wxWidgets version is 2.3.4 or above.
dnl ])
dnl fi
dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
dnl
dnl LIBS="$LIBS $WX_LIBS"
dnl
dnl If you want to support standard --enable-debug/unicode/shared options, you
dnl may do the following:
dnl
dnl ...
dnl AC_CANONICAL_SYSTEM
dnl
dnl # define configure options
dnl WX_CONFIG_OPTIONS
dnl WX_STANDARD_OPTIONS([debug,unicode,shared,toolkit,wxshared])
dnl
dnl # basic configure checks
dnl ...
dnl
dnl # we want to always have DEBUG==WX_DEBUG and UNICODE==WX_UNICODE
dnl WX_DEBUG=$DEBUG
dnl WX_UNICODE=$UNICODE
dnl
dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
dnl WX_CONFIG_CHECK([2.8.0], [wxWin=1],,[html,core,net,base],[$WXCONFIG_FLAGS])
dnl WX_DETECT_STANDARD_OPTION_VALUES
dnl
dnl # write the output files
dnl AC_CONFIG_FILES([Makefile ...])
dnl AC_OUTPUT
dnl
dnl # optional: just to show a message to the user
dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
dnl
dnl ---------------------------------------------------------------------------
dnl ---------------------------------------------------------------------------
dnl WX_CONFIG_OPTIONS
dnl
dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and
dnl --wx-config command line options
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_CONFIG_OPTIONS],
[
AC_ARG_WITH(wxdir,
[ --with-wxdir=PATH Use uninstalled version of wxWidgets in PATH],
[ wx_config_name="$withval/wx-config"
wx_config_args="--inplace"])
AC_ARG_WITH(wx-config,
[ --with-wx-config=CONFIG wx-config script to use (optional)],
wx_config_name="$withval" )
AC_ARG_WITH(wx-prefix,
[ --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)],
wx_config_prefix="$withval", wx_config_prefix="")
AC_ARG_WITH(wx-exec-prefix,
[ --with-wx-exec-prefix=PREFIX
Exec prefix where wxWidgets is installed (optional)],
wx_config_exec_prefix="$withval", wx_config_exec_prefix="")
])
dnl Helper macro for checking if wx version is at least $1.$2.$3, set's
dnl wx_ver_ok=yes if it is:
AC_DEFUN([_WX_PRIVATE_CHECK_VERSION],
[
wx_ver_ok=""
if test "x$WX_VERSION" != x ; then
if test $wx_config_major_version -gt $1; then
wx_ver_ok=yes
else
if test $wx_config_major_version -eq $1; then
if test $wx_config_minor_version -gt $2; then
wx_ver_ok=yes
else
if test $wx_config_minor_version -eq $2; then
if test $wx_config_micro_version -ge $3; then
wx_ver_ok=yes
fi
fi
fi
fi
fi
fi
])
dnl ---------------------------------------------------------------------------
dnl WX_CONFIG_CHECK(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
dnl [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS]]]])
dnl
dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME
dnl environment variable to override the default name of the wx-config script
dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this
dnl case the macro won't even waste time on tests for its existence.
dnl
dnl Optional WX-LIBS argument contains comma- or space-separated list of
dnl wxWidgets libraries to link against. If it is not specified then WX_LIBS
dnl and WX_LIBS_STATIC will contain flags to link with all of the core
dnl wxWidgets libraries.
dnl
dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config
dnl invocation command in present. It can be used to fine-tune lookup of
dnl best wxWidgets build available.
dnl
dnl Example use:
dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
dnl [--unicode --debug])
dnl ---------------------------------------------------------------------------
dnl
dnl Get the cflags and libraries from the wx-config script
dnl
AC_DEFUN([WX_CONFIG_CHECK],
[
dnl do we have wx-config name: it can be wx-config or wxd-config or ...
if test x${WX_CONFIG_NAME+set} != xset ; then
WX_CONFIG_NAME=wx-config
fi
if test "x$wx_config_name" != x ; then
WX_CONFIG_NAME="$wx_config_name"
fi
dnl deal with optional prefixes
if test x$wx_config_exec_prefix != x ; then
wx_config_args="$wx_config_args --exec-prefix=$wx_config_exec_prefix"
WX_LOOKUP_PATH="$wx_config_exec_prefix/bin"
fi
if test x$wx_config_prefix != x ; then
wx_config_args="$wx_config_args --prefix=$wx_config_prefix"
WX_LOOKUP_PATH="$WX_LOOKUP_PATH:$wx_config_prefix/bin"
fi
if test "$cross_compiling" = "yes"; then
wx_config_args="$wx_config_args --host=$host_alias"
fi
dnl don't search the PATH if WX_CONFIG_NAME is absolute filename
if test -x "$WX_CONFIG_NAME" ; then
AC_MSG_CHECKING(for wx-config)
WX_CONFIG_PATH="$WX_CONFIG_NAME"
AC_MSG_RESULT($WX_CONFIG_PATH)
else
AC_PATH_PROG(WX_CONFIG_PATH, $WX_CONFIG_NAME, no, "$WX_LOOKUP_PATH:$PATH")
fi
if test "$WX_CONFIG_PATH" != "no" ; then
WX_VERSION=""
min_wx_version=ifelse([$1], ,2.2.1,$1)
if test -z "$5" ; then
AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version])
else
AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)])
fi
dnl don't add the libraries ($4) to this variable as this would result in
dnl an error when it's used with --version below
WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5"
WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null`
wx_config_major_version=`echo $WX_VERSION | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
wx_config_minor_version=`echo $WX_VERSION | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
wx_config_micro_version=`echo $WX_VERSION | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
wx_requested_major_version=`echo $min_wx_version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
wx_requested_minor_version=`echo $min_wx_version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
wx_requested_micro_version=`echo $min_wx_version | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
_WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version],
[$wx_requested_minor_version],
[$wx_requested_micro_version])
if test -n "$wx_ver_ok"; then
AC_MSG_RESULT(yes (version $WX_VERSION))
WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs $4`
dnl is this even still appropriate? --static is a real option now
dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is
dnl what the user actually wants, making this redundant at best.
dnl For now keep it in case anyone actually used it in the past.
AC_MSG_CHECKING([for wxWidgets static library])
WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs $4 2>/dev/null`
if test "x$WX_LIBS_STATIC" = "x"; then
AC_MSG_RESULT(no)
else
AC_MSG_RESULT(yes)
fi
dnl starting with version 2.2.6 wx-config has --cppflags argument
wx_has_cppflags=""
if test $wx_config_major_version -gt 2; then
wx_has_cppflags=yes
else
if test $wx_config_major_version -eq 2; then
if test $wx_config_minor_version -gt 2; then
wx_has_cppflags=yes
else
if test $wx_config_minor_version -eq 2; then
if test $wx_config_micro_version -ge 6; then
wx_has_cppflags=yes
fi
fi
fi
fi
fi
dnl starting with version 2.7.0 wx-config has --rescomp option
wx_has_rescomp=""
if test $wx_config_major_version -gt 2; then
wx_has_rescomp=yes
else
if test $wx_config_major_version -eq 2; then
if test $wx_config_minor_version -ge 7; then
wx_has_rescomp=yes
fi
fi
fi
if test "x$wx_has_rescomp" = x ; then
dnl cannot give any useful info for resource compiler
WX_RESCOMP=
else
WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp`
fi
if test "x$wx_has_cppflags" = x ; then
dnl no choice but to define all flags like CFLAGS
WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
WX_CPPFLAGS=$WX_CFLAGS
WX_CXXFLAGS=$WX_CFLAGS
WX_CFLAGS_ONLY=$WX_CFLAGS
WX_CXXFLAGS_ONLY=$WX_CFLAGS
else
dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS
WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags $4`
WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags $4`
WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"`
WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"`
fi
ifelse([$2], , :, [$2])
else
if test "x$WX_VERSION" = x; then
dnl no wx-config at all
AC_MSG_RESULT(no)
else
AC_MSG_RESULT(no (version $WX_VERSION is not new enough))
fi
WX_CFLAGS=""
WX_CPPFLAGS=""
WX_CXXFLAGS=""
WX_LIBS=""
WX_LIBS_STATIC=""
WX_RESCOMP=""
if test ! -z "$5"; then
wx_error_message="
The configuration you asked for $PACKAGE_NAME requires a wxWidgets
build with the following settings:
$5
but such build is not available.
To see the wxWidgets builds available on this system, please use
'wx-config --list' command. To use the default build, returned by
'wx-config --selected-config', use the options with their 'auto'
default values."
fi
wx_error_message="
The requested wxWidgets build couldn't be found.
$wx_error_message
If you still get this error, then check that 'wx-config' is
in path, the directory where wxWidgets libraries are installed
(returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH
or equivalent variable and wxWidgets version is $1 or above."
ifelse([$3], , AC_MSG_ERROR([$wx_error_message]), [$3])
fi
else
WX_CFLAGS=""
WX_CPPFLAGS=""
WX_CXXFLAGS=""
WX_LIBS=""
WX_LIBS_STATIC=""
WX_RESCOMP=""
ifelse([$3], , :, [$3])
fi
AC_SUBST(WX_CPPFLAGS)
AC_SUBST(WX_CFLAGS)
AC_SUBST(WX_CXXFLAGS)
AC_SUBST(WX_CFLAGS_ONLY)
AC_SUBST(WX_CXXFLAGS_ONLY)
AC_SUBST(WX_LIBS)
AC_SUBST(WX_LIBS_STATIC)
AC_SUBST(WX_VERSION)
AC_SUBST(WX_RESCOMP)
dnl need to export also WX_VERSION_MINOR and WX_VERSION_MAJOR symbols
dnl to support wxpresets bakefiles (we export also WX_VERSION_MICRO for completeness):
WX_VERSION_MAJOR="$wx_config_major_version"
WX_VERSION_MINOR="$wx_config_minor_version"
WX_VERSION_MICRO="$wx_config_micro_version"
AC_SUBST(WX_VERSION_MAJOR)
AC_SUBST(WX_VERSION_MINOR)
AC_SUBST(WX_VERSION_MICRO)
])
dnl ---------------------------------------------------------------------------
dnl Get information on the wxrc program for making C++, Python and xrs
dnl resource files.
dnl
dnl AC_ARG_ENABLE(...)
dnl AC_ARG_WITH(...)
dnl ...
dnl WX_CONFIG_OPTIONS
dnl ...
dnl WX_CONFIG_CHECK(2.6.0, wxWin=1)
dnl if test "$wxWin" != 1; then
dnl AC_MSG_ERROR([
dnl wxWidgets must be installed on your system
dnl but wx-config script couldn't be found.
dnl
dnl Please check that wx-config is in path, the directory
dnl where wxWidgets libraries are installed (returned by
dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or
dnl equivalent variable and wxWidgets version is 2.6.0 or above.
dnl ])
dnl fi
dnl
dnl WXRC_CHECK([HAVE_WXRC=1], [HAVE_WXRC=0])
dnl if test "x$HAVE_WXRC" != x1; then
dnl AC_MSG_ERROR([
dnl The wxrc program was not installed or not found.
dnl
dnl Please check the wxWidgets installation.
dnl ])
dnl fi
dnl
dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
dnl
dnl LDFLAGS="$LDFLAGS $WX_LIBS"
dnl ---------------------------------------------------------------------------
dnl ---------------------------------------------------------------------------
dnl WXRC_CHECK([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
dnl
dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS
dnl resources. The variable WXRC will be set and substituted in the configure
dnl script and Makefiles.
dnl
dnl Example use:
dnl WXRC_CHECK([wxrc=1], [wxrc=0])
dnl ---------------------------------------------------------------------------
dnl
dnl wxrc program from the wx-config script
dnl
AC_DEFUN([WXRC_CHECK],
[
AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler])
if test "x$WX_CONFIG_NAME" = x; then
AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.])
else
AC_MSG_CHECKING([for wxrc])
if test "x$WXRC" = x ; then
dnl wx-config --utility is a new addition to wxWidgets:
_WX_PRIVATE_CHECK_VERSION(2,5,3)
if test -n "$wx_ver_ok"; then
WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc`
fi
fi
if test "x$WXRC" = x ; then
AC_MSG_RESULT([not found])
ifelse([$2], , :, [$2])
else
AC_MSG_RESULT([$WXRC])
ifelse([$1], , :, [$1])
fi
AC_SUBST(WXRC)
fi
])
dnl ---------------------------------------------------------------------------
dnl WX_LIKE_LIBNAME([output-var] [prefix], [name])
dnl
dnl Sets the "output-var" variable to the name of a library named with same
dnl wxWidgets rule.
dnl E.g. for output-var=='lib', name=='test', prefix='mine', sets
dnl the $lib variable to:
dnl 'mine_gtk2ud_test-2.8'
dnl if WX_PORT=gtk2, WX_UNICODE=1, WX_DEBUG=1 and WX_RELEASE=28
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_LIKE_LIBNAME],
[
wx_temp="$2""_""$WX_PORT"
dnl add the [u][d] string
if test "$WX_UNICODE" = "1"; then
wx_temp="$wx_temp""u"
fi
if test "$WX_DEBUG" = "1"; then
wx_temp="$wx_temp""d"
fi
dnl complete the name of the lib
wx_temp="$wx_temp""_""$3""-$WX_VERSION_MAJOR.$WX_VERSION_MINOR"
dnl save it in the user's variable
$1=$wx_temp
])
dnl ---------------------------------------------------------------------------
dnl WX_ARG_ENABLE_YESNOAUTO/WX_ARG_WITH_YESNOAUTO
dnl
dnl Two little custom macros which define the ENABLE/WITH configure arguments.
dnl Macro arguments:
dnl $1 = the name of the --enable / --with feature
dnl $2 = the name of the variable associated
dnl $3 = the description of that feature
dnl $4 = the default value for that feature
dnl $5 = additional action to do in case option is given with "yes" value
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_ARG_ENABLE_YESNOAUTO],
[AC_ARG_ENABLE($1,
AC_HELP_STRING([--enable-$1], [$3 (default is $4)]),
[], [enableval="$4"])
dnl Show a message to the user about this option
AC_MSG_CHECKING([for the --enable-$1 option])
if test "$enableval" = "yes" ; then
AC_MSG_RESULT([yes])
$2=1
$5
elif test "$enableval" = "no" ; then
AC_MSG_RESULT([no])
$2=0
elif test "$enableval" = "auto" ; then
AC_MSG_RESULT([will be automatically detected])
$2="auto"
else
AC_MSG_ERROR([
Unrecognized option value (allowed values: yes, no, auto)
])
fi
])
AC_DEFUN([WX_ARG_WITH_YESNOAUTO],
[AC_ARG_WITH($1,
AC_HELP_STRING([--with-$1], [$3 (default is $4)]),
[], [withval="$4"])
dnl Show a message to the user about this option
AC_MSG_CHECKING([for the --with-$1 option])
if test "$withval" = "yes" ; then
AC_MSG_RESULT([yes])
$2=1
$5
dnl NB: by default we don't allow --with-$1=no option
dnl since it does not make much sense !
elif test "$6" = "1" -a "$withval" = "no" ; then
AC_MSG_RESULT([no])
$2=0
elif test "$withval" = "auto" ; then
AC_MSG_RESULT([will be automatically detected])
$2="auto"
else
AC_MSG_ERROR([
Unrecognized option value (allowed values: yes, auto)
])
fi
])
dnl ---------------------------------------------------------------------------
dnl WX_STANDARD_OPTIONS([options-to-add])
dnl
dnl Adds to the configure script one or more of the following options:
dnl --enable-[debug|unicode|shared|wxshared|wxdebug]
dnl --with-[gtk|msw|motif|x11|mac|mgl|dfb]
dnl --with-wxversion
dnl Then checks for their presence and eventually set the DEBUG, UNICODE, SHARED,
dnl PORT, WX_SHARED, WX_DEBUG, variables to one of the "yes", "no", "auto" values.
dnl
dnl Note that e.g. UNICODE != WX_UNICODE; the first is the value of the
dnl --enable-unicode option (in boolean format) while the second indicates
dnl if wxWidgets was built in Unicode mode (and still is in boolean format).
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_STANDARD_OPTIONS],
[
dnl the following lines will expand to WX_ARG_ENABLE_YESNOAUTO calls if and only if
dnl the $1 argument contains respectively the debug,unicode or shared options.
dnl be careful here not to set debug flag if only "wxdebug" was specified
ifelse(regexp([$1], [\bdebug]), [-1],,
[WX_ARG_ENABLE_YESNOAUTO([debug], [DEBUG], [Build in debug mode], [auto])])
ifelse(index([$1], [unicode]), [-1],,
[WX_ARG_ENABLE_YESNOAUTO([unicode], [UNICODE], [Build in Unicode mode], [auto])])
ifelse(regexp([$1], [\bshared]), [-1],,
[WX_ARG_ENABLE_YESNOAUTO([shared], [SHARED], [Build as shared library], [auto])])
dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-toolkit since it's an option
dnl which must be able to accept the auto|gtk1|gtk2|msw|... values
ifelse(index([$1], [toolkit]), [-1],,
[
AC_ARG_WITH([toolkit],
AC_HELP_STRING([--with-toolkit],
[Build against a specific wxWidgets toolkit (default is auto)]),
[], [withval="auto"])
dnl Show a message to the user about this option
AC_MSG_CHECKING([for the --with-toolkit option])
if test "$withval" = "auto" ; then
AC_MSG_RESULT([will be automatically detected])
TOOLKIT="auto"
else
TOOLKIT="$withval"
dnl PORT must be one of the allowed values
if test "$TOOLKIT" != "gtk1" -a "$TOOLKIT" != "gtk2" -a \
"$TOOLKIT" != "msw" -a "$TOOLKIT" != "motif" -a \
"$TOOLKIT" != "x11" -a "$TOOLKIT" != "mac" -a \
"$TOOLKIT" != "mgl" -a "$TOOLKIT" != "dfb" ; then
AC_MSG_ERROR([
Unrecognized option value (allowed values: auto, gtk1, gtk2, msw, motif, x11, mac, mgl, dfb)
])
fi
AC_MSG_RESULT([$TOOLKIT])
fi
])
dnl ****** IMPORTANT *******
dnl Unlike for the UNICODE setting, you can build your program in
dnl shared mode against a static build of wxWidgets. Thus we have the
dnl following option which allows these mixtures. E.g.
dnl
dnl ./configure --disable-shared --with-wxshared
dnl
dnl will build your library in static mode against the first available
dnl shared build of wxWidgets.
dnl
dnl Note that's not possible to do the viceversa:
dnl
dnl ./configure --enable-shared --without-wxshared
dnl
dnl Doing so you would try to build your library in shared mode against a static
dnl build of wxWidgets. This is not possible (you would mix PIC and non PIC code) !
dnl A check for this combination of options is in WX_DETECT_STANDARD_OPTION_VALUES
dnl (where we know what 'auto' should be expanded to).
dnl
dnl If you try to build something in ANSI mode against a UNICODE build
dnl of wxWidgets or in RELEASE mode against a DEBUG build of wxWidgets,
dnl then at best you'll get ton of linking errors !
dnl ************************
ifelse(index([$1], [wxshared]), [-1],,
[
WX_ARG_WITH_YESNOAUTO(
[wxshared], [WX_SHARED],
[Force building against a shared build of wxWidgets, even if --disable-shared is given],
[auto], [], [1])
])
dnl Just like for SHARED and WX_SHARED it may happen that some adventurous
dnl peoples will want to mix a wxWidgets release build with a debug build of
dnl his app/lib. So, we have both DEBUG and WX_DEBUG variables.
ifelse(index([$1], [wxdebug]), [-1],,
[
WX_ARG_WITH_YESNOAUTO(
[wxdebug], [WX_DEBUG],
[Force building against a debug build of wxWidgets, even if --disable-debug is given],
[auto], [], [1])
])
dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-wxversion since it's an option
dnl which accepts the "auto|2.6|2.7|2.8|2.9|3.0" etc etc values
ifelse(index([$1], [wxversion]), [-1],,
[
AC_ARG_WITH([wxversion],
AC_HELP_STRING([--with-wxversion],
[Build against a specific version of wxWidgets (default is auto)]),
[], [withval="auto"])
dnl Show a message to the user about this option
AC_MSG_CHECKING([for the --with-wxversion option])
if test "$withval" = "auto" ; then
AC_MSG_RESULT([will be automatically detected])
WX_RELEASE="auto"
else
wx_requested_major_version=`echo $withval | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
wx_requested_minor_version=`echo $withval | \
sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
dnl both vars above must be exactly 1 digit
if test "${#wx_requested_major_version}" != "1" -o \
"${#wx_requested_minor_version}" != "1" ; then
AC_MSG_ERROR([
Unrecognized option value (allowed values: auto, 2.6, 2.7, 2.8, 2.9, 3.0)
])
fi
WX_RELEASE="$wx_requested_major_version"".""$wx_requested_minor_version"
AC_MSG_RESULT([$WX_RELEASE])
fi
])
if test "$WX_DEBUG_CONFIGURE" = "1"; then
echo "[[dbg]] DEBUG: $DEBUG, WX_DEBUG: $WX_DEBUG"
echo "[[dbg]] UNICODE: $UNICODE, WX_UNICODE: $WX_UNICODE"
echo "[[dbg]] SHARED: $SHARED, WX_SHARED: $WX_SHARED"
echo "[[dbg]] TOOLKIT: $TOOLKIT, WX_TOOLKIT: $WX_TOOLKIT"
echo "[[dbg]] VERSION: $VERSION, WX_RELEASE: $WX_RELEASE"
fi
])
dnl ---------------------------------------------------------------------------
dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
dnl
dnl Sets the WXCONFIG_FLAGS string using the SHARED,DEBUG,UNICODE variable values
dnl which are different from "auto".
dnl Thus this macro needs to be called only once all options have been set.
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS],
[
if test "$WX_SHARED" = "1" ; then
WXCONFIG_FLAGS="--static=no "
elif test "$WX_SHARED" = "0" ; then
WXCONFIG_FLAGS="--static=yes "
fi
if test "$WX_DEBUG" = "1" ; then
WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=yes "
elif test "$WX_DEBUG" = "0" ; then
WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=no "
fi
dnl The user should have set WX_UNICODE=UNICODE
if test "$WX_UNICODE" = "1" ; then
WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=yes "
elif test "$WX_UNICODE" = "0" ; then
WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=no "
fi
if test "$TOOLKIT" != "auto" ; then
WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--toolkit=$TOOLKIT "
fi
if test "$WX_RELEASE" != "auto" ; then
WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--version=$WX_RELEASE "
fi
dnl strip out the last space of the string
WXCONFIG_FLAGS=${WXCONFIG_FLAGS% }
if test "$WX_DEBUG_CONFIGURE" = "1"; then
echo "[[dbg]] WXCONFIG_FLAGS: $WXCONFIG_FLAGS"
fi
])
dnl ---------------------------------------------------------------------------
dnl _WX_SELECTEDCONFIG_CHECKFOR([RESULTVAR], [STRING], [MSG]
dnl [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
dnl
dnl Outputs the given MSG. Then searches the given STRING in the wxWidgets
dnl additional CPP flags and put the result of the search in WX_$RESULTVAR
dnl also adding the "yes" or "no" message result to MSG.
dnl ---------------------------------------------------------------------------
AC_DEFUN([_WX_SELECTEDCONFIG_CHECKFOR],
[
if test "$$1" = "auto" ; then
dnl The user does not have particular preferences for this option;
dnl so we will detect the wxWidgets relative build setting and use it
AC_MSG_CHECKING([$3])
dnl set WX_$1 variable to 1 if the $WX_SELECTEDCONFIG contains the $2
dnl string or to 0 otherwise.
dnl NOTE: 'expr match STRING REGEXP' cannot be used since on Mac it
dnl doesn't work; we use 'expr STRING : REGEXP' instead
WX_$1=$(expr "$WX_SELECTEDCONFIG" : ".*$2.*")
if test "$WX_$1" != "0"; then
WX_$1=1
AC_MSG_RESULT([yes])
ifelse([$4], , :, [$4])
else
WX_$1=0
AC_MSG_RESULT([no])
ifelse([$5], , :, [$5])
fi
else
dnl Use the setting given by the user
WX_$1=$$1
fi
])
dnl ---------------------------------------------------------------------------
dnl WX_DETECT_STANDARD_OPTION_VALUES
dnl
dnl Detects the values of the following variables:
dnl 1) WX_RELEASE
dnl 2) WX_UNICODE
dnl 3) WX_DEBUG
dnl 4) WX_SHARED (and also WX_STATIC)
dnl 5) WX_PORT
dnl from the previously selected wxWidgets build; this macro in fact must be
dnl called *after* calling the WX_CONFIG_CHECK macro.
dnl
dnl Note that the WX_VERSION_MAJOR, WX_VERSION_MINOR symbols are already set
dnl by WX_CONFIG_CHECK macro
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_DETECT_STANDARD_OPTION_VALUES],
[
dnl IMPORTANT: WX_VERSION contains all three major.minor.micro digits,
dnl while WX_RELEASE only the major.minor ones.
WX_RELEASE="$WX_VERSION_MAJOR""$WX_VERSION_MINOR"
if test $WX_RELEASE -lt 26 ; then
AC_MSG_ERROR([
Cannot detect the wxWidgets configuration for the selected wxWidgets build
since its version is $WX_VERSION < 2.6.0; please install a newer
version of wxWidgets.
])
fi
dnl The wx-config we are using understands the "--selected_config"
dnl option which returns an easy-parseable string !
WX_SELECTEDCONFIG=$($WX_CONFIG_WITH_ARGS --selected_config)
if test "$WX_DEBUG_CONFIGURE" = "1"; then
echo "[[dbg]] Using wx-config --selected-config"
echo "[[dbg]] WX_SELECTEDCONFIG: $WX_SELECTEDCONFIG"
fi
dnl we could test directly for WX_SHARED with a line like:
dnl _WX_SELECTEDCONFIG_CHECKFOR([SHARED], [shared],
dnl [if wxWidgets was built in SHARED mode])
dnl but wx-config --selected-config DOES NOT outputs the 'shared'
dnl word when wx was built in shared mode; it rather outputs the
dnl 'static' word when built in static mode.
if test $WX_SHARED = "1"; then
STATIC=0
elif test $WX_SHARED = "0"; then
STATIC=1
elif test $WX_SHARED = "auto"; then
STATIC="auto"
fi
dnl Now set the WX_UNICODE, WX_DEBUG, WX_STATIC variables
_WX_SELECTEDCONFIG_CHECKFOR([UNICODE], [unicode],
[if wxWidgets was built with UNICODE enabled])
_WX_SELECTEDCONFIG_CHECKFOR([DEBUG], [debug],
[if wxWidgets was built in DEBUG mode])
_WX_SELECTEDCONFIG_CHECKFOR([STATIC], [static],
[if wxWidgets was built in STATIC mode])
dnl init WX_SHARED from WX_STATIC
if test "$WX_STATIC" != "0"; then
WX_SHARED=0
else
WX_SHARED=1
fi
AC_SUBST(WX_UNICODE)
AC_SUBST(WX_DEBUG)
AC_SUBST(WX_SHARED)
dnl detect the WX_PORT to use
if test "$TOOLKIT" = "auto" ; then
dnl The user does not have particular preferences for this option;
dnl so we will detect the wxWidgets relative build setting and use it
AC_MSG_CHECKING([which wxWidgets toolkit was selected])
WX_GTKPORT1=$(expr "$WX_SELECTEDCONFIG" : ".*gtk1.*")
WX_GTKPORT2=$(expr "$WX_SELECTEDCONFIG" : ".*gtk2.*")
WX_MSWPORT=$(expr "$WX_SELECTEDCONFIG" : ".*msw.*")
WX_MOTIFPORT=$(expr "$WX_SELECTEDCONFIG" : ".*motif.*")
WX_OSXCOCOAPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_cocoa.*")
WX_OSXCARBONPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_carbon.*")
WX_X11PORT=$(expr "$WX_SELECTEDCONFIG" : ".*x11.*")
WX_MGLPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mgl.*")
WX_DFBPORT=$(expr "$WX_SELECTEDCONFIG" : ".*dfb.*")
WX_PORT="unknown"
if test "$WX_GTKPORT1" != "0"; then WX_PORT="gtk1"; fi
if test "$WX_GTKPORT2" != "0"; then WX_PORT="gtk2"; fi
if test "$WX_MSWPORT" != "0"; then WX_PORT="msw"; fi
if test "$WX_MOTIFPORT" != "0"; then WX_PORT="motif"; fi
if test "$WX_OSXCOCOAPORT" != "0"; then WX_PORT="osx_cocoa"; fi
if test "$WX_OSXCARBONPORT" != "0"; then WX_PORT="osx_carbon"; fi
if test "$WX_X11PORT" != "0"; then WX_PORT="x11"; fi
if test "$WX_MGLPORT" != "0"; then WX_PORT="mgl"; fi
if test "$WX_DFBPORT" != "0"; then WX_PORT="dfb"; fi
dnl NOTE: backward-compatible check for wx2.8; in wx2.9 the mac
dnl ports are called 'osx_cocoa' and 'osx_carbon' (see above)
WX_MACPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mac.*")
if test "$WX_MACPORT" != "0"; then WX_PORT="mac"; fi
dnl check at least one of the WX_*PORT has been set !
if test "$WX_PORT" = "unknown" ; then
AC_MSG_ERROR([
Cannot detect the currently installed wxWidgets port !
Please check your 'wx-config --cxxflags'...
])
fi
AC_MSG_RESULT([$WX_PORT])
else
dnl Use the setting given by the user
if test -z "$TOOLKIT" ; then
WX_PORT=$TOOLKIT
else
dnl try with PORT
WX_PORT=$PORT
fi
fi
AC_SUBST(WX_PORT)
if test "$WX_DEBUG_CONFIGURE" = "1"; then
echo "[[dbg]] Values of all WX_* options after final detection:"
echo "[[dbg]] WX_DEBUG: $WX_DEBUG"
echo "[[dbg]] WX_UNICODE: $WX_UNICODE"
echo "[[dbg]] WX_SHARED: $WX_SHARED"
echo "[[dbg]] WX_RELEASE: $WX_RELEASE"
echo "[[dbg]] WX_PORT: $WX_PORT"
fi
dnl Avoid problem described in the WX_STANDARD_OPTIONS which happens when
dnl the user gives the options:
dnl ./configure --enable-shared --without-wxshared
dnl or just do
dnl ./configure --enable-shared
dnl but there is only a static build of wxWidgets available.
if test "$WX_SHARED" = "0" -a "$SHARED" = "1"; then
AC_MSG_ERROR([
Cannot build shared library against a static build of wxWidgets !
This error happens because the wxWidgets build which was selected
has been detected as static while you asked to build $PACKAGE_NAME
as shared library and this is not possible.
Use the '--disable-shared' option to build $PACKAGE_NAME
as static library or '--with-wxshared' to use wxWidgets as shared library.
])
fi
dnl now we can finally update the DEBUG,UNICODE,SHARED options
dnl to their final values if they were set to 'auto'
if test "$DEBUG" = "auto"; then
DEBUG=$WX_DEBUG
fi
if test "$UNICODE" = "auto"; then
UNICODE=$WX_UNICODE
fi
if test "$SHARED" = "auto"; then
SHARED=$WX_SHARED
fi
if test "$TOOLKIT" = "auto"; then
TOOLKIT=$WX_PORT
fi
dnl in case the user needs a BUILD=debug/release var...
if test "$DEBUG" = "1"; then
BUILD="debug"
elif test "$DEBUG" = "0" -o "$DEBUG" = ""; then
BUILD="release"
fi
dnl respect the DEBUG variable adding the optimize/debug flags
dnl NOTE: the CXXFLAGS are merged together with the CPPFLAGS so we
dnl don't need to set them, too
if test "$DEBUG" = "1"; then
CXXFLAGS="$CXXFLAGS -g -O0"
CFLAGS="$CFLAGS -g -O0"
else
CXXFLAGS="$CXXFLAGS -O2"
CFLAGS="$CFLAGS -O2"
fi
])
dnl ---------------------------------------------------------------------------
dnl WX_BOOLOPT_SUMMARY([name of the boolean variable to show summary for],
dnl [what to print when var is 1],
dnl [what to print when var is 0])
dnl
dnl Prints $2 when variable $1 == 1 and prints $3 when variable $1 == 0.
dnl This macro mainly exists just to make configure.ac scripts more readable.
dnl
dnl NOTE: you need to use the [" my message"] syntax for 2nd and 3rd arguments
dnl if you want that m4 avoid to throw away the spaces prefixed to the
dnl argument value.
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_BOOLOPT_SUMMARY],
[
if test "x$$1" = "x1" ; then
echo $2
elif test "x$$1" = "x0" ; then
echo $3
else
echo "$1 is $$1"
fi
])
dnl ---------------------------------------------------------------------------
dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
dnl
dnl Shows a summary message to the user about the WX_* variable contents.
dnl This macro is used typically at the end of the configure script.
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG],
[
echo
echo " The wxWidgets build which will be used by $PACKAGE_NAME $PACKAGE_VERSION"
echo " has the following settings:"
WX_BOOLOPT_SUMMARY([WX_DEBUG], [" - DEBUG build"], [" - RELEASE build"])
WX_BOOLOPT_SUMMARY([WX_UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
WX_BOOLOPT_SUMMARY([WX_SHARED], [" - SHARED mode"], [" - STATIC mode"])
echo " - VERSION: $WX_VERSION"
echo " - PORT: $WX_PORT"
])
dnl ---------------------------------------------------------------------------
dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN, WX_STANDARD_OPTIONS_SUMMARY_MSG_END
dnl
dnl Like WX_STANDARD_OPTIONS_SUMMARY_MSG macro but these two macros also gives info
dnl about the configuration of the package which used the wxpresets.
dnl
dnl Typical usage:
dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
dnl echo " - Package setting 1: $SETTING1"
dnl echo " - Package setting 2: $SETTING1"
dnl ...
dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_END
dnl
dnl ---------------------------------------------------------------------------
AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN],
[
echo
echo " ----------------------------------------------------------------"
echo " Configuration for $PACKAGE_NAME $PACKAGE_VERSION successfully completed."
echo " Summary of main configuration settings for $PACKAGE_NAME:"
WX_BOOLOPT_SUMMARY([DEBUG], [" - DEBUG build"], [" - RELEASE build"])
WX_BOOLOPT_SUMMARY([UNICODE], [" - UNICODE mode"], [" - ANSI mode"])
WX_BOOLOPT_SUMMARY([SHARED], [" - SHARED mode"], [" - STATIC mode"])
])
AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_END],
[
WX_STANDARD_OPTIONS_SUMMARY_MSG
echo
echo " Now, just run make."
echo " ----------------------------------------------------------------"
echo
])
dnl ---------------------------------------------------------------------------
dnl Deprecated macro wrappers
dnl ---------------------------------------------------------------------------
AC_DEFUN([AM_OPTIONS_WXCONFIG], [WX_CONFIG_OPTIONS])
AC_DEFUN([AM_PATH_WXCONFIG], [
WX_CONFIG_CHECK([$1],[$2],[$3],[$4],[$5])
])
# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
# Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 1
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.11'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
m4_if([$1], [1.11.6], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
# _AM_AUTOCONF_VERSION(VERSION)
# -----------------------------
# aclocal traces this macro to find the Autoconf version.
# This is a private macro too. Using m4_define simplifies
# the logic in aclocal, which can simply ignore this definition.
m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.11.6])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 1
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
[dnl Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])dnl
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 9
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])dnl
AC_SUBST([$1_FALSE])dnl
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
m4_define([_AM_COND_VALUE_$1], [$2])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([[conditional "$1" was never defined.
Usually this means the macro was only invoked conditionally.]])
fi])])
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
# 2010, 2011 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 12
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
am__universal=false
m4_case([$1], [CC],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac],
[CXX],
[case " $depcc " in #(
*\ -arch\ *\ -arch\ *) am__universal=true ;;
esac])
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this. Also, some Intel
# versions had trouble with output in subdirs
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
gcc)
# This depmode causes a compiler race in universal mode.
test "$am__universal" = false || continue
;;
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
msvc7 | msvc7msys | msvisualcpp | msvcmsys)
# This compiler won't grok `-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
am__minus_obj=
;;
none) break ;;
esac
if depmode=$depmode \
source=sub/conftest.c object=$am__obj \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
AM_CONDITIONAL([am__fastdep$1], [
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[ --disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
am__nodep='_no'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])dnl
_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
AC_SUBST([am__nodep])dnl
_AM_SUBST_NOTMAKE([am__nodep])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
#serial 5
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[{
# Autoconf 2.62 quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
*\'*) eval set x "$CONFIG_FILES" ;;
*) set x $CONFIG_FILES ;;
esac
shift
for mf
do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# Grep'ing the whole file is not good either: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 16
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_PREREQ([2.62])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
AC_SUBST([CYGPATH_W])
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
[m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
[_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
[define([AC_PROG_CC],
defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_CXX],
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_OBJC],
[_AM_DEPENDENCIES(OBJC)],
[define([AC_PROG_OBJC],
defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
])
dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
dnl mangled by Autoconf and run in a shell conditional statement.
m4_define([_AC_COMPILER_EXEEXT],
m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated. The stamp files are numbered to have different names.
# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
# loop where config.status creates the headers, so we can generate
# our stamp files there.
AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
[# Compute $1's index in $config_headers.
_am_arg=$1
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$_am_arg | $_am_arg:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
# Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 1
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
if test x"${install_sh}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
*)
install_sh="\${SHELL} $am_aux_dir/install-sh"
esac
fi
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
AC_DEFUN([AM_SET_LEADING_DOT],
[rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008,
# 2011 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 5
# AM_MAINTAINER_MODE([DEFAULT-MODE])
# ----------------------------------
# Control maintainer-specific portions of Makefiles.
# Default is to disable them, unless `enable' is passed literally.
# For symmetry, `disable' may be passed as well. Anyway, the user
# can override the default with the --enable/--disable switch.
AC_DEFUN([AM_MAINTAINER_MODE],
[m4_case(m4_default([$1], [disable]),
[enable], [m4_define([am_maintainer_other], [disable])],
[disable], [m4_define([am_maintainer_other], [enable])],
[m4_define([am_maintainer_other], [enable])
m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode's default is 'disable' unless 'enable' is passed
AC_ARG_ENABLE([maintainer-mode],
[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
[USE_MAINTAINER_MODE=$enableval],
[USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST([MAINT])dnl
]
)
AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
# Check to see how 'make' treats includes. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 4
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo this is the am__doit target
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# Ignore all kinds of additional output from `make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
am__quote=
_am_result=GNU
;;
esac
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=.include
am__quote="\""
_am_result=BSD
;;
esac
fi
AC_SUBST([am__include])
AC_SUBST([am__quote])
AC_MSG_RESULT([$_am_result])
rm -f confinc confmf
])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 6
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
AC_REQUIRE_AUX_FILE([missing])dnl
if test x"${MISSING+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
*)
MISSING="\${SHELL} $am_aux_dir/missing" ;;
esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
AC_MSG_WARN([`missing' script is too old or missing])
fi
])
# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
# Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 1
# AM_PROG_MKDIR_P
# ---------------
# Check for `mkdir -p'.
AC_DEFUN([AM_PROG_MKDIR_P],
[AC_PREREQ([2.60])dnl
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
dnl while keeping a definition of mkdir_p for backward compatibility.
dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
dnl Makefile.ins that do not define MKDIR_P, so we do our own
dnl adjustment using top_builddir (which is defined more often than
dnl MKDIR_P).
AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
case $mkdir_p in
[[\\/$]]* | ?:[[\\/]]*) ;;
*/*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
esac
])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
# Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 5
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# --------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
# _AM_SET_OPTIONS(OPTIONS)
# ------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
# Check to make sure that the build environment is sane. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 5
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[[\\\"\#\$\&\'\`$am_lf]]*)
AC_MSG_ERROR([unsafe absolute working directory name]);;
esac
case $srcdir in
*[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
esac
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t "$srcdir/configure" conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])
# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 1
# AM_PROG_INSTALL_STRIP
# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 3
# _AM_SUBST_NOTMAKE(VARIABLE)
# ---------------------------
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
# This macro is traced by Automake.
AC_DEFUN([_AM_SUBST_NOTMAKE])
# AM_SUBST_NOTMAKE(VARIABLE)
# --------------------------
# Public sister of _AM_SUBST_NOTMAKE.
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# serial 2
# _AM_PROG_TAR(FORMAT)
# --------------------
# Check how to create a tarball in format FORMAT.
# FORMAT should be one of `v7', `ustar', or `pax'.
#
# Substitute a variable $(am__tar) that is a command
# writing to stdout a FORMAT-tarball containing the directory
# $tardir.
# tardir=directory && $(am__tar) > result.tar
#
# Substitute a variable $(am__untar) that extract such
# a tarball read from stdin.
# $(am__untar) < result.tar
AC_DEFUN([_AM_PROG_TAR],
[# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AC_SUBST([AMTAR], ['$${TAR-tar}'])
m4_if([$1], [v7],
[am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
[m4_case([$1], [ustar],, [pax],,
[m4_fatal([Unknown tar format])])
AC_MSG_CHECKING([how to create a $1 tar archive])
# Loop over all known methods to create a tar archive until one works.
_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
_am_tools=${am_cv_prog_tar_$1-$_am_tools}
# Do not fold the above two line into one, because Tru64 sh and
# Solaris sh will not grok spaces in the rhs of `-'.
for _am_tool in $_am_tools
do
case $_am_tool in
gnutar)
for _am_tar in tar gnutar gtar;
do
AM_RUN_LOG([$_am_tar --version]) && break
done
am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
am__untar="$_am_tar -xf -"
;;
plaintar)
# Must skip GNU tar: if it does not support --format= it doesn't create
# ustar tarball either.
(tar --version) >/dev/null 2>&1 && continue
am__tar='tar chf - "$$tardir"'
am__tar_='tar chf - "$tardir"'
am__untar='tar xf -'
;;
pax)
am__tar='pax -L -x $1 -w "$$tardir"'
am__tar_='pax -L -x $1 -w "$tardir"'
am__untar='pax -r'
;;
cpio)
am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
am__untar='cpio -i -H $1 -d'
;;
none)
am__tar=false
am__tar_=false
am__untar=false
;;
esac
# If the value was cached, stop now. We just wanted to have am__tar
# and am__untar set.
test -n "${am_cv_prog_tar_$1}" && break
# tar/untar a dummy directory, and stop if the command works
rm -rf conftest.dir
mkdir conftest.dir
echo GrepMe > conftest.dir/file
AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
rm -rf conftest.dir
if test -s conftest.tar; then
AM_RUN_LOG([$am__untar <conftest.tar])
grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
fi
done
rm -rf conftest.dir
AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
AC_MSG_RESULT([$am_cv_prog_tar_$1])])
AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR