Skip to content

Command Line Interface to the Philips Hue lighting system.

License

Notifications You must be signed in to change notification settings

birkirb/hue-cli

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

42 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

hue-cli

Command Line Interface to the Philips Hue lighting system.

Installation

To begin using, install the ruby gem (this requires ruby 1.9 and rubygems)

$ gem install hue-cli

This will install the "hue" command.

Usage

To check the bridge state, simply type

$ hue

If this is the first time the command is run, it will scan for bridges on the network and attempt to register the application. Follow the on-screen instructions to do so.

Register

You can also explicity register the application with

$ hue register

Bridge state

Once registered, examine the current state of the bridge.

$ hue
Philips Hue
Button pressed: false
Timestamp: 2013-09-02T17:44:10
Network configuration:
  IP:      196.168.0.1
  Gateway: 196.168.0.255
  Mask:    255.255.255.0
  DHCP:    true
  MAC:     00:00:00:00:00:00
  Proxy:   none:0
Applications:
  073f2ed95fcbbef2532c751dd404cc9d : hue-cli
Lights:
  1. Living Overhead - OFF
  2. Living Cabinet - OFF
  3. Living Corner Lamp - OFF

Lights state

Examine or operate on all lights.

$ hue lights
1.  Bedroom - Overhead: ON
    Brightness: 254 (100%)
    Color: XY=[0.6736, 0.3221], RGB\u2248[255, 60, 40]
2.  Living Room - Cabinet: OFF
    Brightness: 142 (56%)
    Color: XY=[0.674, 0.322], RGB\u2248[255, 60, 40]
3.  Living Room - Overhead: ON
    Brightness: 254 (100%)
    Color: Temperature=2710°K (369 mired), RGB\u2248[255, 166, 87]

Find new lights.

$ hue lights find

Light state

Examine the state of a single light

$ hue light 1

or just

$ hue 1
1.  Bedroom - Overhead: ON
    Brightness: 254 (100%)
    Color: XY=[0.6736, 0.3221], RGB\u2248[255, 60, 40]

Change Light state

Change a single light state with the follow (rather self-explanatory) commands

$ hue 1 on
$ hue 1 off
$ hue 1 flash
$ hue 1 blink
$ hue 1 solid

Brightness

Brightness can be set with a value (0-255) or percentage (0%-100%)

$ hue 1 brightness 200
$ hue 1 brightness 50%
$ hue 1
Living Overhead: ON
Brightness: 128 (50%)
Color: Temperature=2012°K (497 mired), RGB≈[255, 136, 13]

Color

The color command takes 1-3 arguments, each interpreted depending on range and value.

Set to 6500 Kelvin.

$ hue 1 color 6500 
$ hue 1
Living Overhead: ON
Brightness: 128 (50%)
Color: Temperature=6500°K (153 mired), RGB≈[255, 254, 250]

Set to 240 mired.

$ hue 1 color 240
$ hue 1
Living Overhead: ON
Brightness: 128 (50%)
Color: Temperature=4167°K (240 mired), RGB≈[255, 208, 170]

Set the hue and saturation.

$ hue 1 color 30000 255
$ hue 1
Living Overhead: ON
Brightness: 128 (50%)
Color: Hue=30000, Saturation=255, RGB≈[0, 255, 190]

Set the XY

$ hue 1 color 0.25 0.25
$ hue 1
Living Overhead: ON
Brightness: 128 (50%)
Color: Hue=30000, Saturation=255, RGB≈[0, 255, 190]

Set all lights.

All the single light state commands can be applied to all lights.

$ hue lights brightness 50%

State aliases.

The following state aliases exist and can be used on all or single lights.

$ hue 1 relax
$ hue lights energize
$ hue 1 reading
$ hue 1 concentrate
$ hue 1 red
$ hue 1 blue
$ hue 1 green
$ hue 1 white
$ hue 1 pink

State Dump

Dump the current state of the light, this will display the current state as a JSON hash. This can then be pasted into your local (~/.hue-cli/light_alias.yml) or system (/etc/hue/light_alias.yml) alias files.

$ hue 1 dump
$ hue lights dump

Paste into your file like this:

"yellow": {"on":true,"bri":254,"xy":[0.4823,0.4621],"alert":"none","effect":"none"}

About

Command Line Interface to the Philips Hue lighting system.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages