Getting 404 Page not Found [Support]: #11535
Answered
by
hawkeye217
Elder-HVAC-Man
asked this question in
General Support
-
Describe the problem you are havingClicking on the Frigate icon on the sidebar of HA, it takes me to a page that says 404 page not found. VersionSystem 0.14.0-b97e274 Frigate config filemqtt:
enabled: true
host: 192.168.1.170
user: secret
password: secret
ffmpeg:
hwaccel_args: preset-vaapi
output_args:
record: preset-record-generic-audio-aac
detectors:
coral:
type: edgetpu
device: usb
record:
# Optional: Enable recording (default: shown below)
# WARNING: If recording is disabled in the config, turning it on via
# the UI or MQTT later will have no effect.
enabled: false
# Optional: Number of minutes to wait between cleanup runs (default: shown below)
# This can be used to reduce the frequency of deleting recording segments from disk if you want to minimize i/o
expire_interval: 60
# Optional: Retention settings for recording
retain:
# Optional: Number of days to retain recordings regardless of events (default: shown below)
# NOTE: This should be set to 0 and retention should be defined in events section below
# if you only want to retain recordings of events.
days: 0
# Optional: Mode for retention. Available options are: all, motion, and active_objects
# all - save all recording segments regardless of activity
# motion - save all recordings segments with any detected motion
# active_objects - save all recording segments with active/moving objects
# NOTE: this mode only applies when the days setting above is greater than 0
mode: motion
# Optional: Event recording settings
events:
# Optional: Number of seconds before the event to include (default: shown below)
pre_capture: 5
# Optional: Number of seconds after the event to include (default: shown below)
post_capture: 5
# Optional: Objects to save recordings for. (default: all tracked objects)
objects:
- person
# Optional: Retention settings for recordings of events
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Mode for retention. (default: shown below)
# all - save all recording segments for events regardless of activity
# motion - save all recordings segments for events with any detected motion
# active_objects - save all recording segments for event with active/moving objects
#
# NOTE: If the retain mode for the camera is more restrictive than the mode configured
# here, the segments will already be gone by the time this mode is applied.
# For example, if the camera retain mode is "motion", the segments without motion are
# never stored, so setting the mode to "all" here won't bring them back.
mode: motion
# Optional: Per object retention days
objects:
person: 15
# Optional: Configuration for the jpg snapshots written to the clips directory for each event
# NOTE: Can be overridden at the camera level
snapshots:
# Optional: Enable writing jpg snapshot to /media/frigate/clips (default: shown below)
enabled: true
# Optional: save a clean PNG copy of the snapshot image (default: shown below)
clean_copy: true
# Optional: print a timestamp on the snapshots (default: shown below)
timestamp: false
# Optional: draw bounding box on the snapshots (default: shown below)
bounding_box: false
# Optional: crop the snapshot (default: shown below)
crop: true
# Optional: height to resize the snapshot to (default: original size)
height: 175
# Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Camera override for retention settings (default: global values)
retain:
# Required: Default retention days
default: 10
# Optional: Per object retention days
objects:
person: 15
car: 8
go2rtc:
streams:
garage:
- rtsp://admin:secret@192.168.1.199:554/cam/realmonitor?channel=1&subtype=0
front:
- rtsp://admin:secret@192.168.1.35:554/cam/realmonitor?channel=1&subtype=0
entry:
- rtsp://admin:secret@192.168.1.76:554/cam/realmonitor?channel=1&subtype=0
yard:
- rtsp://admin:secret@192.168.1.9:554/cam/realmonitor?channel=1&subtype=0
front_door:
- rtsp://admin:secret@192.168.1.69:554/cam/realmonitor?channel=1&subtype=0
patio:
- rtsp://admin:secret@192.168.1.93:554/cam/realmonitor?channel=1&subtype=0
backyard:
- rtsp://admin:secret@192.168.1.134:554/cam/realmonitor?channel=1&subtype=0
gate:
- rtsp://192.168.1.170:8554/gate
cameras:
front: # <------ Name the camera
ffmpeg:
inputs:
- path: rtsp://admin:secret@192.168.1.35:554/cam/realmonitor?channel=1&subtype=1 # <----- The stream you want to use for detection
roles:
- detect
- path: rtsp://admin:secret@192.168.1.35:554/cam/realmonitor?channel=1&subtype=0
roles:
- record
detect:
enabled: true
width: 704 # <---- update for your camera's resolution
height: 480 # <---- update for your camera's resolution
objects:
track:
- car
- dog
- cat
- bird
- person
filters:
dog:
threshold: 0.6
cat:
threshold: 0.6
bird:
threshold: 0.6
person:
threshold: 0.7
motion:
mask:
- 548,41,667,46,675,23,547,21
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- car_zone
- people_zone
zones:
car_zone:
coordinates: 467,58,402,114,343,152,198,161,230,111,290,91,364,58
objects:
- car
people_zone:
coordinates:
0,284,0,480,328,480,352,350,379,206,392,157,527,161,639,168,679,160,662,77,487,50,336,49,200,59
objects:
- person
- dog
- cat
- bird
ui:
order: 2
####################################################################################
entry: # <------ Name the camera
ffmpeg:
inputs:
- path: rtsp://admin:secret@192.168.1.76:554/cam/realmonitor?channel=1&subtype=1 # <----- The stream you want to use for detection
roles:
- detect
- path: rtsp://admin:secret@192.168.1.76:554/cam/realmonitor?channel=1&subtype=0 # <----- The stream you want to use for detection
roles:
- record
detect:
enabled: true
width: 704 # <---- update for your camera's resolution
height: 480 # <---- update for your camera's resolution
objects:
track:
- person
- car
- dog
- cat
- bird
filters:
dog:
threshold: 0.6
cat:
threshold: 0.6
person:
threshold: 0.7
bird:
mask:
0,447,42,459,86,459,116,424,140,378,144,340,152,288,151,238,134,184,100,186,59,176,0,173
motion:
mask:
- 581,41,682,48,682,0,580,0
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- people_zone2
zones:
people_zone2:
coordinates:
229,164,150,206,172,278,166,336,160,398,24,480,205,480,364,480,375,420,451,354,507,370,553,296,595,154,618,33,538,0,464,0,398,0,312,0,230,54
objects:
- person
- dog
- cat
- bird
ui:
order: 3
######################################################################################
yard: # <------ Name the camera
ffmpeg:
inputs:
- path: rtsp://admin:secret@192.168.1.9:554/cam/realmonitor?channel=1&subtype=1 # <----- The stream you want to use for detection
roles:
- detect
- path: rtsp://admin:secret@192.168.1.9:554/cam/realmonitor?channel=1&subtype=0
roles:
- record
detect:
enabled: true
width: 704 # <---- update for your camera's resolution
height: 480 # <---- update for your camera's resolution
objects:
track:
- person
- car
- dog
- cat
- bird
filters:
person:
threshold: 0.75
cat:
threshold: 0.6
dog:
threshold: 0.6
motion:
mask:
- 551,41,668,40,671,21,546,21
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- people_zone1
zones:
people_zone1:
coordinates: 374,448,679,444,679,281,514,262,418,74,170,82,133,304,202,335,302,341
objects:
- person
- dog
- cat
- bird
ui:
order: 1
##################################################################################
patio:
ffmpeg:
inputs:
- path: rtsp://admin:secret@192.168.1.93:554/cam/realmonitor?channel=1&subtype=1
roles:
- detect
- path: rtsp://admin:secret@192.168.1.93:554/cam/realmonitor?channel=1&subtype=0
roles:
- record
detect:
enabled: true
width: 704 # <---- update for your camera's resolution
height: 480 # <---- update for your camera's resolution
objects:
track:
- person
- dog
- cat
- bird
filters:
dog:
threshold: 0.6
cat:
threshold: 0.6
motion:
contour_area: 10
threshold: 30
mask:
- 235,356,300,364,289,301,224,275
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- patio_zone
zones:
patio_zone:
coordinates: 252,480,456,480,704,438,704,319,629,215,470,142,327,95,169,139,46,187
objects:
- person
- dog
- cat
- bird
ui:
order: 5
#####################################################################################
backyard:
ffmpeg:
inputs:
- path: rtsp://admin:secret@192.168.1.134:554/cam/realmonitor?channel=1&subtype=1
roles:
- detect
- path: rtsp://admin:secret@192.168.1.134:554/cam/realmonitor?channel=1&subtype=0
roles:
- record
detect:
enabled: true
width: 704 # <---- update for your camera's resolution
height: 480 # <---- update for your camera's resolution
objects:
track:
- person
- dog
- cat
- bird
filters:
person:
threshold: 0.80
dog:
min_score: 0.4
threshold: 0.6
cat:
min_score: 0.4
threshold: 0.6
bird:
min_score: 0.4
threshold: 0.6
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- backyard_zone
zones:
backyard_zone:
coordinates:
58,185,0,198,0,291,51,358,28,390,126,480,293,480,704,459,704,321,704,165,546,129,338,94,158,89
objects:
- person
- dog
- cat
- bird
ui:
order: 8
########################################################################################
front_door:
ffmpeg:
inputs:
- path:
rtsp://admin:secret@192.168.1.69:554/cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif
roles:
- detect
- path:
rtsp://admin:secret@192.168.1.69:554/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif
roles:
- record
detect:
enabled: true
width: 720 # <---- update for your camera's resolution
height: 576 # <---- update for your camera's resolution
fps: 5
objects:
track:
- person
- dog
- cat
- bird
filters:
dog:
threshold: 0.6
mask:
- 214,326,256,346,300,359,352,362,400,362,430,330,420,286,381,266,340,250,289,242,242,242,211,281
cat:
threshold: 0.6
mask:
- 214,326,256,346,300,359,352,362,400,362,430,330,420,286,381,266,340,250,289,242,242,242,211,281
bird:
threshold: 0.6
mask:
- 214,326,256,346,300,359,352,362,400,362,430,330,420,286,381,266,340,250,289,242,242,242,211,281
person:
threshold: 0.80
mask:
- 263,477,311,479,341,461,328,373,262,390
motion:
mask:
- 263,477,311,479,341,461,328,373,262,390
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- door_zone
zones:
door_zone:
coordinates: 93,576,354,576,441,462,446,397,455,331,406,299,342,335,210,348,37,382,58,460
objects:
- person
- dog
- cat
- bird
ui:
order: 6
####################################################################################
gate:
ffmpeg:
inputs:
- path: rtsp://192.168.1.170:8554/gate
roles:
- detect
- record
detect:
enabled: true
width: 1296 # <---- update for your camera's resolution
height: 1728 # <---- update for your camera's resolution
fps: 5
objects:
track:
- person
- dog
- cat
- bird
filters:
person:
threshold: 0.80
bird: {}
motion:
mask:
- 0,737,501,769,924,775,903,218,683,187,304,196,0,245
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- gate_zone
zones:
gate_zone:
coordinates:
580,1728,598,1502,627,1210,538,1212,541,1035,696,1031,703,1212,871,1203,886,827,0,809,0,1728
objects:
- person
- dog
- cat
- bird
ui:
order: 6
###########################################################################
garage:
ffmpeg:
inputs:
- path: rtsp://admin:secret@192.168.1.199:554/cam/realmonitor?channel=1&subtype=0
roles:
- detect
- record
detect:
enabled: true
width: 1920 # <---- update for your camera's resolution
height: 1080 # <---- update for your camera's resolution
fps: 5
objects:
track:
- person
filters:
person:
threshold: 0.80
record: # <----- Enable recording
enabled: true
retain:
days: 0
mode: motion
snapshots:
required_zones:
- garage_zone
zones:
garage_zone:
coordinates:
56,699,52,1026,306,1055,981,1034,1289,1032,1870,1034,1889,468,1841,151,1245,120,540,137,62,205
objects:
- person
ui:
order: 9Relevant log output2024-05-26 12:58:59.425509948 [INFO] Preparing Frigate...
2024-05-26 12:58:59.661492284 [INFO] Starting Frigate...
2024-05-26 12:59:10.011251845 [2024-05-26 07:59:10] frigate.app INFO : Starting Frigate (0.14.0-b97e274)
2024-05-26 12:59:10.011730342 [2024-05-26 07:59:10] frigate.app INFO : Creating directory: /tmp/cache
2024-05-26 12:59:10.018988228 [2024-05-26 07:59:10] frigate.util.config INFO : Checking if frigate config needs migration...
2024-05-26 12:59:10.019809694 [2024-05-26 07:59:10] frigate.util.config INFO : frigate config does not need migration...
2024-05-26 12:59:10.260908960 [2024-05-26 07:59:10] peewee_migrate.logs INFO : Starting migrations
2024-05-26 12:59:10.262384788 [2024-05-26 07:59:10] peewee_migrate.logs INFO : There is nothing to migrate
2024-05-26 12:59:10.280116060 [2024-05-26 07:59:10] frigate.app INFO : Recording process started: 323
2024-05-26 12:59:10.283320627 [2024-05-26 07:59:10] frigate.app INFO : Recording process started: 324
2024-05-26 12:59:10.289120195 [2024-05-26 07:59:10] frigate.app INFO : go2rtc process pid: 94
2024-05-26 12:59:10.356534026 [2024-05-26 07:59:10] frigate.app INFO : Output process started: 353
2024-05-26 12:59:10.367797094 [2024-05-26 07:59:10] detector.coral INFO : Starting detection process: 352
2024-05-26 12:59:10.395246215 [2024-05-26 07:59:10] frigate.detectors.plugins.edgetpu_tfl INFO : Attempting to load TPU as usb
2024-05-26 12:59:13.239121558 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for front: 420
2024-05-26 12:59:13.239127488 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for entry: 421
2024-05-26 12:59:13.239134520 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for yard: 428
2024-05-26 12:59:13.239138559 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for patio: 437
2024-05-26 12:59:13.239159769 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for backyard: 445
2024-05-26 12:59:13.239163829 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for front_door: 455
2024-05-26 12:59:13.239766458 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for gate: 461
2024-05-26 12:59:13.240267209 [2024-05-26 07:59:11] frigate.app INFO : Camera processor started for garage: 469
2024-05-26 12:59:13.240583762 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for front: 470
2024-05-26 12:59:13.240964730 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for entry: 480
2024-05-26 12:59:13.241384704 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for yard: 483
2024-05-26 12:59:13.241771791 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for patio: 497
2024-05-26 12:59:13.242127171 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for backyard: 499
2024-05-26 12:59:13.242544800 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for front_door: 507
2024-05-26 12:59:13.242937961 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for gate: 508
2024-05-26 12:59:13.243285350 [2024-05-26 07:59:11] frigate.app INFO : Capture process started for garage: 513
2024-05-26 12:59:13.256648476 [2024-05-26 07:59:13] frigate.detectors.plugins.edgetpu_tfl INFO : TPU foundFFprobe output from your cameraNot applicableFrigate statsNo response Operating systemHassOS Install methodHassOS Addon Coral versionUSB Network connectionWired Camera make and modelamcrest Any other information that may be helpfulClicking on the icons brings me to the appropriate pages. Just seems odd to get the 404 error initially. I have uninstalled and reinstalled both Frigate and the add on. Same outcome after reinstall. |
Beta Was this translation helpful? Give feedback.
Answered by
hawkeye217
May 26, 2024
Replies: 1 comment 1 reply
-
|
This is a known issue with beta 1. Thanks for the report! |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
Thanks, at least I know it isn't something I did. |
Beta Was this translation helpful? Give feedback.
Answer selected by
Elder-HVAC-Man
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
This is a known issue with beta 1. Thanks for the report!