Skip to content

Commit

Permalink
Bluetooth: hci_bcm4377: Add BCM4388 support
Browse files Browse the repository at this point in the history 
This new variant needs a different core2_window1 and always uses
beamforming.
The BAR2 also has an offset (RAM start, presumably), so add that.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
[sven: rebased, updated some comments, mentioned 4388 in Kconfig]
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
  • Loading branch information
@marcan @Vudentz
marcan authored and Vudentz committed Jun 3, 2024
1 parent d33224b commit 0b22b7f
Show file tree
Hide file tree
Showing 2 changed files with 50 additions and 17 deletions.
6 changes: 3 additions & 3 deletions drivers/bluetooth/Kconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -287,12 +287,12 @@ config BT_HCIBCM203X


config BT_HCIBCM4377
tristate "HCI BCM4377/4378/4387 PCIe driver"
tristate "HCI BCM4377/4378/4387/4388 PCIe driver"
depends on PCI
select FW_LOADER
help
Support for Broadcom BCM4377/4378/4387 Bluetooth chipsets attached via
PCIe. These are usually found in Apple machines.
Support for Broadcom BCM4377/4378/4387/4388 Bluetooth chipsets
attached via PCIe. These are usually found in Apple machines.

Say Y here to compile support for HCI BCM4377 family devices into the
kernel or say M to compile it as module (hci_bcm4377).
Expand Down
61 changes: 47 additions & 14 deletions drivers/bluetooth/hci_bcm4377.c
View file
Original file line number Diff line number Diff line change
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* Bluetooth HCI driver for Broadcom 4377/4378/4387 devices attached via PCIe
* Bluetooth HCI driver for Broadcom 4377/4378/4387/4388 devices attached via PCIe
*
* Copyright (C) The Asahi Linux Contributors
*/
Expand All @@ -26,11 +26,13 @@ enum bcm4377_chip {
BCM4377 = 0,
BCM4378,
BCM4387,
BCM4388,
};

#define BCM4377_DEVICE_ID 0x5fa0
#define BCM4378_DEVICE_ID 0x5f69
#define BCM4387_DEVICE_ID 0x5f71
#define BCM4388_DEVICE_ID 0x5f72

#define BCM4377_TIMEOUT msecs_to_jiffies(1000)
#define BCM4377_BOOT_TIMEOUT msecs_to_jiffies(5000)
Expand Down Expand Up @@ -488,6 +490,7 @@ struct bcm4377_data;
* second window in BAR0
* has_bar0_core2_window2: Set to true if this chip requires the second core's
* second window to be configured
* bar2_offset: Offset to the start of the variables in BAR2
* clear_pciecfg_subsystem_ctrl_bit19: Set to true if bit 19 in the
* vendor-specific subsystem control
* register has to be cleared
Expand All @@ -511,6 +514,7 @@ struct bcm4377_hw {
u32 bar0_window1;
u32 bar0_window2;
u32 bar0_core2_window2;
u32 bar2_offset;

unsigned long has_bar0_core2_window2 : 1;
unsigned long clear_pciecfg_subsystem_ctrl_bit19 : 1;
Expand Down Expand Up @@ -836,8 +840,8 @@ static irqreturn_t bcm4377_irq(int irq, void *data)
struct bcm4377_data *bcm4377 = data;
u32 bootstage, rti_status;

bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE);
rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS);
bootstage = ioread32(bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_BOOTSTAGE);
rti_status = ioread32(bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_RTI_STATUS);

if (bootstage != bcm4377->bootstage ||
rti_status != bcm4377->rti_status) {
Expand Down Expand Up @@ -1197,6 +1201,14 @@ static int bcm4387_send_calibration(struct bcm4377_data *bcm4377)
bcm4377->taurus_cal_size);
}

static int bcm4388_send_calibration(struct bcm4377_data *bcm4377)
{
/* BCM4388 always uses beamforming */
return __bcm4378_send_calibration(
bcm4377, bcm4377->taurus_beamforming_cal_blob,
bcm4377->taurus_beamforming_cal_size);
}

static const struct firmware *bcm4377_request_blob(struct bcm4377_data *bcm4377,
const char *suffix)
{
Expand Down Expand Up @@ -1820,8 +1832,8 @@ static int bcm4377_boot(struct bcm4377_data *bcm4377)
int ret = 0;
u32 bootstage, rti_status;

bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE);
rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS);
bootstage = ioread32(bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_BOOTSTAGE);
rti_status = ioread32(bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_RTI_STATUS);

if (bootstage != 0) {
dev_err(&bcm4377->pdev->dev, "bootstage is %d and not 0\n",
Expand Down Expand Up @@ -1855,9 +1867,12 @@ static int bcm4377_boot(struct bcm4377_data *bcm4377)
iowrite32(BCM4377_DMA_MASK,
bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_SIZE);

iowrite32(lower_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_LO);
iowrite32(upper_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_HI);
iowrite32(fw->size, bcm4377->bar2 + BCM4377_BAR2_FW_SIZE);
iowrite32(lower_32_bits(fw_dma),
bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_FW_LO);
iowrite32(upper_32_bits(fw_dma),
bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_FW_HI);
iowrite32(fw->size,
bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_FW_SIZE);
iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_FW_DOORBELL);

dev_dbg(&bcm4377->pdev->dev, "waiting for firmware to boot\n");
Expand Down Expand Up @@ -1914,16 +1929,16 @@ static int bcm4377_setup_rti(struct bcm4377_data *bcm4377)
dev_dbg(&bcm4377->pdev->dev, "RTI is in state 1\n");

/* allow access to the entire IOVA space again */
iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_LO);
iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_HI);
iowrite32(0, bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_RTI_WINDOW_LO);
iowrite32(0, bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_RTI_WINDOW_HI);
iowrite32(BCM4377_DMA_MASK,
bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_SIZE);
bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_RTI_WINDOW_SIZE);

/* setup "Converged IPC" context */
iowrite32(lower_32_bits(bcm4377->ctx_dma),
bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_LO);
bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_CONTEXT_ADDR_LO);
iowrite32(upper_32_bits(bcm4377->ctx_dma),
bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_HI);
bcm4377->bar2 + bcm4377->hw->bar2_offset + BCM4377_BAR2_CONTEXT_ADDR_HI);
iowrite32(2, bcm4377->bar0 + BCM4377_BAR0_RTI_CONTROL);

ret = wait_for_completion_interruptible_timeout(&bcm4377->event,
Expand Down Expand Up @@ -2489,6 +2504,21 @@ static const struct bcm4377_hw bcm4377_hw_variants[] = {
.send_calibration = bcm4387_send_calibration,
.send_ptb = bcm4378_send_ptb,
},

[BCM4388] = {
.id = 0x4388,
.otp_offset = 0x415c,
.bar2_offset = 0x200000,
.bar0_window1 = 0x18002000,
.bar0_window2 = 0x18109000,
.bar0_core2_window2 = 0x18106000,
.has_bar0_core2_window2 = true,
.broken_mws_transport_config = true,
.broken_le_coded = true,
.broken_le_ext_adv_report_phy = true,
.send_calibration = bcm4388_send_calibration,
.send_ptb = bcm4378_send_ptb,
},
};

#define BCM4377_DEVID_ENTRY(id) \
Expand All @@ -2502,6 +2532,7 @@ static const struct pci_device_id bcm4377_devid_table[] = {
BCM4377_DEVID_ENTRY(4377),
BCM4377_DEVID_ENTRY(4378),
BCM4377_DEVID_ENTRY(4387),
BCM4377_DEVID_ENTRY(4388),
{},
};
MODULE_DEVICE_TABLE(pci, bcm4377_devid_table);
Expand All @@ -2516,11 +2547,13 @@ static struct pci_driver bcm4377_pci_driver = {
module_pci_driver(bcm4377_pci_driver);

MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
MODULE_DESCRIPTION("Bluetooth support for Broadcom 4377/4378/4387 devices");
MODULE_DESCRIPTION("Bluetooth support for Broadcom 4377/4378/4387/4388 devices");
MODULE_LICENSE("Dual MIT/GPL");
MODULE_FIRMWARE("brcm/brcmbt4377*.bin");
MODULE_FIRMWARE("brcm/brcmbt4377*.ptb");
MODULE_FIRMWARE("brcm/brcmbt4378*.bin");
MODULE_FIRMWARE("brcm/brcmbt4378*.ptb");
MODULE_FIRMWARE("brcm/brcmbt4387*.bin");
MODULE_FIRMWARE("brcm/brcmbt4387*.ptb");
MODULE_FIRMWARE("brcm/brcmbt4388*.bin");
MODULE_FIRMWARE("brcm/brcmbt4388*.ptb");

0 comments on commit 0b22b7f

Please sign in to comment.