The aim of this script is to provide and replay VSS data into a KUKSA Databroker. Therefore, it takes a CSV-file, containting pre-defined sequences of VSS signals including timing delays, and provides it to the KUKSA Databroker.
The provider requires an installation of Python in version 3 and can be executed with the following commands:
pip install -r requirements.txt
python3 provider.py
This assumes a running KUKSA Databroker at 127.0.0.1:55555 and a file named signals.csv containing the signals to apply. See the section Arguments for more details on possible arguments and default values.
The provider uses the kuksa_client Python implementation which you need to install on your system, e.g., by applying the requirement.txt with pip.
You can start the provider with the following arguments on a command line:
| short argument | long argument | environment variable | description | default value |
|---|---|---|---|---|
| -f | --file | PROVIDER_SIGNALS_FILE | This indicates the CSV-file containing the signals to update in the KUKSA Databroker. | signals.csv |
| -a | --address | KUKSA_DATA_BROKER_ADDR | This indicates the address of KUKSA Databroker to connect to. | 127.0.0.1 |
| -p | --port | KUKSA_DATA_BROKER_PORT | This indicates the port of the KUKSA Databroker to connect to. | 55555 |
| -i | --infinite | PROVIDER_INFINITE | If the flag is set, the provider loops over the file until stopped, otherwise the file gets processed once. | not present/False |
| -l | --log | PROVIDER_LOG_LEVEL | This sets the logging level. Possible values are: DEBUG, INFO, DEBUG, WARNING, ERROR, CRITICAL | WARNING |
| --cacertificate | - | Path to root CA. If defined the client will attempt to use a secure connection and identify the server using this certificate. | None | |
| --tls-server-name | - | TLS server name, may be needed if addressing a server by IP-name. | None |
An example CSV-files is available in signals.csv where an example line is:
current,Vehicle.Speed,48,1
The delimiter for the CSV-file is the ',' sign. The first line is interpreted as header and not as data.
Each line in the csv file consists of the following elements:
| header | description | example |
|---|---|---|
| field | indicates whether to update the current value (current) or the target value (target) for the signal. |
current |
| signal | the name of the signal to update | Vehicle.Speed |
| value | the new value | 48 |
| delay | Indicates the time in seconds which the provider shall wait after processing this signal. This way one can emulate the change of signals over time. | 0 |
If connecting to a KUKSA Databroker that require a secure connection you must specify which root certificate to
use to identify the Server by the --cacertificate argument. If your (test) setup use the KUKSA example
certificates you must give CA.pem
as root CA. The server name must match the name in the certificate provided by KUKSA.val databroker.
Due to a limitation in the gRPC client, if connecting by IP-address you may need to give a name listed in the certificate
by the --tls-server-name argument. The example server certificate lists the names Server and localhost,
so one of those names needs to be specified if connecting to 127.0.0.1. An example is shown below:
python provider.py --cacertificate /home/user/kuksa.val/kuksa_certificates/CA.pem --tls-server-name Server
- CSV Provider does not support authentication, i.e. it is impossible to communicate with a Databroker that require authentication!
One way to generate a CSV-file for the CSV-provider is to record it from an KUKSA Databroker. This way one can reproduce an interaction of different providers with the KUKSA Databroker. The script in csv_provider/recorder.py allows this recording.
An example call, only recording the vehicle speed and width would be:
pip install -r requirements.txt
python3 recorder.py -s Vehicle.Speed Vehicle.Width
The recorder supports the following parameters:
| short argument | long argument | description | default value |
|---|---|---|---|
| -f | --file | This indicates the filename to which to write the VSS-signals. | signalsOut.csv |
| -s | --signals | A list of signals to record. | There is no default value, but the argument is required. |
| -a | --address | This indicates the address of KUKSA Databroker to connect to. | 127.0.0.1 |
| -p | --port | This indicates the port of the KUKSA Databroker to connect to. | 55555 |
| -l | --log | This sets the logging level. Possible values are: DEBUG, INFO, WARNING, ERROR, CRITICAL | INFO |
This repository is set up to use pre-commit hooks.
Use pip install pre-commit to install pre-commit.
After you clone the project, run pre-commit install to install pre-commit into your git hooks.
Pre-commit will now run on every commit.
Every time you clone a project using pre-commit running pre-commit install should always be the first thing you do.