Skip to content

Latest commit

 

History

History
217 lines (217 loc) · 8.64 KB

README.md

File metadata and controls

217 lines (217 loc) · 8.64 KB
Raw

https://www.bose.ca/en_ca/support/products/portable_speakers_support/soundlink_air.html
https://worldwide.bose.com/updates/soundlink_air_2

Downloads

For Windows

  • In the File Download window, click Run or Save.
  • If Run, follow the prompts to perform the update.
  • If Save, select a location for saving the file (Bose SoundLink Air Wi-Fi Setup Application.exe). Then start the application from your hard drive and follow the prompts to perform the update.

For Mac

  • Click the "Download Now" button below
  • Open the downloaded dmg file, and then double-click the Bose SoundLink Air Wi-Fi Setup Application icon.
  • Follow the instructions in the application to complete setup.

Updating the system software (video included)

How to update the system software on your Bose® SoundLink® Air digital music system
https://www.youtube.com/watch?v=8nDx2V-ncbs

Software updates sometimes become available to improve the performance of your system. To update your software, follow these steps:

Make sure your SoundLink® Air system is connected to your Wi-Fi® network and that there is an Internet connection. The Wi-Fi® indicator on the front panel should be solid blue

Wi-Fi® indicator

On the remote, press and hold MUTE for ten seconds while watching the Wi-Fi indicator

Mute

If the Wi-Fi indicator double-blinks green twice, you can release the MUTE button: the system software is up to date and the system returns to the previous operating mode

Mute

If the Wi-Fi indicator starts quickly blinking green, release the MUTE button: a software update is necessary and the software will start downloading. The Wi-Fi® indicator continues blinking until the download is finished. While the software update is being installed, the Wi-Fi® indicator glows solid green for three seconds followed by a double blink. This pattern repeats until the installation is finished. At the end of the installation, the system emits a tone and automatically restarts. After restart, the system will automatically connect to your Wi-Fi® network again

Note: a software update can take a few minutes to install.

Mute

CAUTION: Do not remove power from the SoundLink® Air system while updating the system software.

Note: If the Wi-Fi® indicator starts blinking red, a system error has occurred. Contact Bose® Customer Service for assistance.