Skip to content

little board to help the teensy 3.6 boot in eurorack modules

Notifications You must be signed in to change notification settings

bpcmusic/teensy36eurorackhelper

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

5 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

teensy36eurorackhelper

little board to help the teensy 3.6 boot in eurorack modules


Mount this little fellow underneath your Teensy 3.6 if you are having trouble booting when mounted in place of a Teensy 3.2 in a Eurorack module. The symptom is that the module never executes your code when booted without USB power.

Teensy 3.6 on TXo

This board adds a voltage supervisor that delays the start of the Teensy (via the Reset pin) until there is adequate power. It was designed to fit on the bottom of the board in an area that would not be populated for a Teensy 3.2.

Top Botton

Order from OSH Park

You can always use Eagle to create your own Gerbers and select your own fab house.

Project BOM:


More details are in this thread over at the Teensy forum:

https://forum.pjrc.com/threads/44704-Boot-on-Power-Up-Problem-with-three-T3-6s

Thanks to everyone there (especially neutron7) for finding the solution. All I did was panel the thing up. Saved my bacon on a project. :)

About

little board to help the teensy 3.6 boot in eurorack modules

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published