Skip to content
IceZUM Alhambra: an Arduino/zum-like Open FPGA electronic board. Synthesize hardware easily, using only open source tools
Branch: master
Clone or download
Pull request Compare This branch is 424 commits behind FPGAwars:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
3D Icezum Rev-1.0-1607. Initial files uploaded Feb 18, 2016
Manufacturing-GERBERs
doc
examples/leds/leds_on
src-altium
wiki
LICENSE
README.md

README.md

Icezum Alhambra

Arduino/zum compatible Open FPGA electronic board. Synthesize hardware easily, using only open source tools

Features

  • FPGA development board (iCE40HX1K-TQ144 from lattice)
  • Open hardware
  • Compatible with the opensource icestorm toolchain
  • Arduino like board: similar pinout than Arduino one / BQ zum.
  • You can Reuse most of available shields
  • Control your robots / printbots from an FPGA
  • 12 MHZ MEMS oscillator
  • ON/OFF switch (turn off your mobile robot easily)
  • Input power voltage: 6 - 17v
  • Max input current: 3A (Perfect for powering your robots)
  • 20 Input/output 5v pins
  • 8 Input/Output 3.3V pins
  • USB micro-B connector for programming the FPGA from the PC (same than zum board)
  • FTDI 2232H USB device allows FPGA programming and UART interface to a PC
  • Reset pushbutton
  • 8 general purpose leds (user leds)
  • 2 general purpose pushbuttons
  • 4 analogue inputs though I2C bus

Documentation

The project documentation is located in the wiki

Author

  • Eladio Delgado Mingorance

Credits

License

Licensed under Creative Commons Attribution-ShareAlike 4.0 International License

You can’t perform that action at this time.