New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
häufiger TIMEOUT-Fehler - CMD_CAMERA_INFO und CMD_SET_ARMING #151
Comments
Habe auch durchgehend ähnlichen Fehler im LOG:
|
Der Rest funktioniert einwandfrei? |
ja perfekt, bis auf das senden von Bildern per Telegram (da wird immer das gleiche alte Bild gesendet) aber denke das wird ein anderes Problem sein |
Neustart hilft nichts |
Welche Geräte sind an der Station registriert? (Txxxx mehr brauch ich nicht) |
2 Eufy Cam mit T8114 und T8140 beginnend und eine Klingel mit T8210 |
ok dann bitte ich dich den Adapter in Debug-Modus zu versetzen, den Fehler 1 Mal nachzubilden und mir dann die Logs zuzusenden (meine Mail findest du hier). |
Hast Post. Hoffe es hilft dir weiter ansonsten einfach nochmal schreien 😉 Vielen Dank im Voraus |
Ich habe nur eine leere Mail erhalten ohne Anhang. |
Komisch, ich seh alles unter gesendet. Sorry, siehst jetzt was? |
@Stormbringer11 Probiere die letzte Version des Adapters 0.6.1. |
Danke aber der Fehler kommt immernoch rein:
eufy-security.0 2021-08-19 19:25:15.175 error (547618) Station: T8010P2320280268 command CMD_CAMERA_INFO failed with error: ERROR_COMMAND_TIMEOUT (-133)
eufy-security.0 2021-08-19 19:25:15.175 debug (547618) [Station.onCommandResponse] Got p2p command response [{"station":"T8010P2320280268","commandType":1103,"channel":255,"returnCodeName":"ERROR_COMMAND_TIMEOUT","returnCode":-133}]
eufy-security.0 2021-08-19 19:25:15.175 warn (547618) Station T8010P2320280268 - Result data for command not received [{"message":{"sequence":6,"command_type":1103,"channel":255,"data":{"type":"Buffer","data":[209,0,0,6,88,90,89,72,79,4,4,0,0,0
Der neue DP eufy-security.0.station.switch_mode_with_access_code, wäre cool aber der ist irgendwie ohne Funkion. Wenn man über Keypad öffnet bleibt er auf false, falls dich das interessiert ;o)
… Am 19.08.2021 um 17:00 schrieb bropat ***@***.***>:
@Stormbringer11 <https://github.com/Stormbringer11> Probiere die letzte Version des Adapters 0.6.1.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#151 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AKNBEWCQ36QQ3J2AEOBFVATT5UMCPANCNFSM5A6Y4YEQ>.
Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&utm_campaign=notification-email>.
|
Dachte ich mir, hatte hierfür noch nichts verändert :P
Das ist eine Einstellungsmöglichkeit (findest du natürlich auch in der App), kein Status ;)
Dieser Fehler kommt wenn der Treiber beim Absetzen eines Befehls nicht innerhalb 15 Sek. eine Rückmeldung von der Station darüber bekommt. @Stormbringer11 kannst du mir vielleicht die Station freigeben, damit ich es genauer überprüfen kann? |
Something incomprehensible is happening with this integration. It loads the iobroker heavily. The message says
|
@DivanX10 |
Yes, the problem persisted and I turned off the iobroker, because the camera is going crazy. Then it turns itself in all directions, then just the iobroker loads the system heavily and thanks to the limiter, the container is being reloaded. The iobroker is now turned off. |
I don't have any problems since I run the adapter with log level "debug". Most of the time a single error only appears directly after calling the iobroker admin-page. |
Hi @bropat , 2021-09-30 15:22:53.690 error Station: T8410P20210902AA command CMD_CAMERA_INFO failed with error: ERROR_COMMAND_TIMEOUT (-133) Hope you will solve it soon Thanks info: |
Hi @bropat eufy-security.0 | 2021-10-09 10:22:39.895 | error | Station: T8010P232003033D command CMD_CAMERA_INFO failed with error: ERROR_COMMAND_TIMEOUT (-133) eufy-security.0 | 2021-10-09 10:22:39.893 | warn | Station T8010P232003033D - Result data for command not received [{"message":{"sequence":649,"command_type":1103,"channel":255,"data":{"type":"Buffer","data":[209,0,2,137,88,90,89,72,79,4,4,0,0,0,1,0,255,0,0,0,255,0,0,0]},"retries":1,"acknowledged":true,"return_code":-133,"timeout":{"_idleTimeout":20000,"_idlePrev":null,"_idleNext":null,"_idleStart":313473035,"_repeat":null,"_destroyed":false}}}] |
Added support for SoloCam E40 (T8131) Added new properties for solo cameras: battery, batteryTemperature, wifiSignalLevel, state, chargingStatus, lastChargingDays, lastChargingRecordedEvents, lastChargingTotalEvents, batteryUsageLastWeek Fixed issue #169 Fixed issue #167 Fixed issue #151 Fixed push notifications for solo cameras (motion and person detection) Updated version of the package eufy-security-client (1.2.0) Updated versions of the package dependencies Further details can be found in the changelog of eufy-security-client (1.2.0)
Hallo und vielen Dank erstmal für die Bereitstellung des Adapters.
Im laufenden Betrieb tauchen sehr häufig Fehler auf. Es scheint, dass sie aus der regelmäßigen Aktualisierung resultieren. Der Abstand der Fehler entspricht dem Intervall aus den Instanz-Einstellungen. Der Modus wird in meiner Umgebung in einem Node-Red-Flow geprüft und je nach Trigger gesetzt.
Kann ich etwas verändern, um den Fehler zu vermeiden?
Vielen Dank!
The text was updated successfully, but these errors were encountered: