Skip to content

cli_origin_test

Github Action edited this page Sep 1, 2022 · 3 revisions

gNMI-1.1: cli Origin

Summary

Ensure that emergency CLI configuration can be pushed to device.

Procedure

Note: this test is intended to cover only the case of pushing some configuration - since it is unknown what CLI configuration would be required in the emergency case that is covered by this requirement.

  • Connect ATE port-1 to DUT port-1.

  • TODO: Push base configuration to DUT specifying an interface configuration for DUT port-1.

  • Push configuration using SetRequest specifying:

    • origin: "" (openconfig, default origin) - containing modelled configuration.

    • origin: "cli" - containing:

      interface <DUT port-1>
      shutdown
      
  • Validate that DUT port-1 is shown as shutdown through telemetry.

  • Validate that ATE port-1 reports that DUT port-1 is down.

  • Run CLI command with GetRequest specifying origin: "cli":

    • show version and show lldp neighbors
    • Validate CLI response is generated by DUT.

Config Parameter coverage

Telemetry Parameter coverage

Clone this wiki locally