Skip to content

The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.

License

Notifications You must be signed in to change notification settings

byDagor/Dagor-Brushless-Controller

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

78 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Dagor Brushless Controller

The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities and three operation modes: angular position, velocity and torque. It is an ESP32-based brushless controller that has an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridges, a temperature sensor and current sensing resistors.

📢 DOCUMENATION WEBSITE: https://docs.dagor.dev/

DagorBoard

Key specs

Specification Rating
Dimensions 44 x 44mm
Mass 12g
Power source voltage 5-24V
Peak rms current up to 40A
Magnetic sensor resolution 14 bits
Temperature sensor range -10 ~ 120°C

Note: The project is STILL currently on it’s Alpha stage and with the help of the Alpha testers the project will move forward faster.

What makes this Controller different?

The Dagor Brushless Controller was designed as a simple platform for hobbyist and students to power brushless-based projects. This board offers wired and wireless connectivity modes to accommodate a variety of different kinds of projects. The firmware for this board was developed for the Arduino development environment and powered by the SimpleFOC project. This code is merely a starting point as it’s encouraged to modify it to fit specific projects. The firmware being very easy to modify and understand gives some key advantages:

  • great platform for single board projects
  • custom communication schemes for multi-board projects
  • implementation of unique control laws
  • endless amount of compatible libraries

HW Revisions

Reivision Changes
2.7 Solid GND plane, input TVS diode.
2.6 Rearrenged the LEDs to avoid bleed, added extra bulk capacitance to the back.

Firmware Roadmap

  • Torque/ current control mode
  • PWM input control
  • Full fault diagnostics report
  • DRV8305 communication library
  • Deep-sleep mode
  • Save calibration parameters in ESP32's EEPROM
  • Stall detection algorithm
  • Finish RS-485-based protocol, directional comms working
  • Virtual walls algorithm
  • Detect DRV warnings vs. errors
  • Make nicer out of bounds behavior
  • Finish implementing state machine
  • Change "H" homing command to accept home as arbitrary number or current position
  • OTA Update
  • Status LED blink patterns

Contact

david@simplefoc.com Linkedin
YouTube

array

About

The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published