Skip to content

BzMiner v21.1.5

Latest
Latest
Compare
Choose a tag to compare
@bzminer bzminer released this 06 May 17:48
v21.1.5
822edf8
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.

Release v21.1.5 of BzMiner. All feedback is welcome ;)

-- What's in this release (v21.1.5)

x New Coin: aidepin
x New Coin: aipg
x Warthog: Optimized and fixed some stability issues
x Warthog: Fixed crashing from previous beta
x Warthog: Added CPU metrics (only linux has power and temp currently)
x Warthog: Fixed CPUs showing up as GPU
x Dynex: Fixed crashes every hour or so
x New option: warthog_cache_config default is 0
x New option: warthog_max_ram_gb is now a decimal
x New option: disable_cpu_metrics set this to true if you experience crashing at startup
x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize
x NOTE: Please reset all warthog_verus_hr_target configs

https://www.bzminer.com/releases/v21.1.5/

Be sure to check out the config generator if having trouble setting up

https://www.bzminer.com/config-generator/

Thanks Son of a Tech for the BC-250! https://www.youtube.com/channel/UC0WNX0de8I1fgKUrjxiPaRA

--- Dynex Notes ---

  • Fine tuning dynex_pow_ratio will likely give you better results than default settings
  • intensity option will adjust how much vram is allowed to be used
  • Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

  • This is an array of values, one for each gpu

  • In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

  • In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

  • In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

  • A value of 0.0 will mine ONLY POUW

  • A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

  • A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

  • A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

  • A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

  • A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

-- Known Issues

  • AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
  • Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
  • If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
  • Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
  • If Nvidia memory temps are not showing, please update to latest nvidia driver
  • Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="21.1.5"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.1.5" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Hive OS Update Command (assuming currently on v21.1.1)

wget https://bzminer.com/downloads/bzminer_v21.1.5_linux.tar.gz; tar -xvf bzminer_v21.1.5_linux.tar.gz; miner stop; cp bzminer_v21.1.5_linux/bzminer /hive/miners/bzminer/21.1.1/; miner start

Rave OS Update Command (assuming currently on v21.1.1)

stop && wget https://bzminer.com/downloads/bzminer_v21.1.5_linux.tar.gz && tar -xvf bzminer_v21.1.5_linux.tar.gz && cp -adpR bzminer_v21.1.5_linux/bzminer /app-data/miners/bzminer-21.1.1 && start

Checksums

bzminer_v21.1.5_windows.zip:

MD5: 10519ca7dec8ec40374b41cddf0ab812
SHA256: 36e4759099cd7e42875c4b0b00f2e9b23b530cae8c56d351ec262f723131dcf6

bzminer_v21.1.5_linux.tar.gz:

MD5: 6221a36c29dee64cab29e5641131b296
SHA256: d6ecb7bb78fd91947a384982f2d20097f4934080a422120107b13210c5204fa7

Assets 4