BzMiner v21.4.0

Release v21.4.0 of BzMiner. All feedback is welcome ;)

-- What's in this release (v21.4.0)

x Warthog: Fixed auto-change to verus 2.2
x Nexa: Fixed rare connection bug

(Larger updates coming soon)

https://www.bzminer.com/releases/v21.4.0/

Be sure to check out the config generator if having trouble setting up

https://www.bzminer.com/config-generator/

Thanks Son of a Tech for the BC-250! https://www.youtube.com/channel/UC0WNX0de8I1fgKUrjxiPaRA

--- Dynex Notes ---

• Fine tuning dynex_pow_ratio will likely give you better results than default settings
• intensity option will adjust how much vram is allowed to be used
• Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

• This is an array of values, one for each gpu

• In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

• In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

• In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

• A value of 0.0 will mine ONLY POUW

• A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

• A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

• A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

• A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

• A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

-- Known Issues

• AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
• Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
• If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
• Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
• If Nvidia memory temps are not showing, please update to latest nvidia driver
• Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="21.4.0"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.4.0" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Hive OS Update Command (assuming currently on v21.3.0)

wget https://bzminer.com/downloads/bzminer_v21.4.0_linux.tar.gz; tar -xvf bzminer_v21.4.0_linux.tar.gz; miner stop; cp bzminer_v21.4.0_linux/bzminer /hive/miners/bzminer/21.3.0/; miner start

Rave OS Update Command (assuming currently on v21.3.0)

stop && wget https://bzminer.com/downloads/bzminer_v21.4.0_linux.tar.gz && tar -xvf bzminer_v21.4.0_linux.tar.gz && cp -adpR bzminer_v21.4.0_linux/bzminer /app-data/miners/bzminer-21.3.0 && start

Checksums

bzminer_v21.4.0_windows.zip:

MD5: c6d280869f1df24bd6ead5405304319e
SHA256: 575bb847bf1ba6114cab04c0b52c84536a0e2c2cc7960a3fae8bffcbbf4290f7

bzminer_v21.4.0_linux.tar.gz:

MD5: 18869f9e04a641fdb520805daeebf94f
SHA256: d16c461279fafe0ad001c8e43db73544d24e6fbf941ef04ea6c54aa72822f915

BzMiner v21.3.0

Release v21.3.0 of BzMiner. All feedback is welcome ;)

-- What's in this release (v21.3.0)

x Updated Warthog to support upcoming verus 2.2 change
x Lowered delay between Warthog rpc calls to node

(Larger updates coming soon)

https://www.bzminer.com/releases/v21.3.0/

Be sure to check out the config generator if having trouble setting up

https://www.bzminer.com/config-generator/

Thanks Son of a Tech for the BC-250! https://www.youtube.com/channel/UC0WNX0de8I1fgKUrjxiPaRA

--- Dynex Notes ---

• Fine tuning dynex_pow_ratio will likely give you better results than default settings
• intensity option will adjust how much vram is allowed to be used
• Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

• This is an array of values, one for each gpu

• In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

• In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

• In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

• A value of 0.0 will mine ONLY POUW

• A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

• A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

• A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

• A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

• A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

-- Known Issues

• AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
• Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
• If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
• Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
• If Nvidia memory temps are not showing, please update to latest nvidia driver
• Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="21.3.0"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.3.0" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Hive OS Update Command (assuming currently on v21.3.0)

wget https://bzminer.com/downloads/bzminer_v21.3.0_linux.tar.gz; tar -xvf bzminer_v21.3.0_linux.tar.gz; miner stop; cp bzminer_v21.3.0_linux/bzminer /hive/miners/bzminer/21.2.0/; miner start

Rave OS Update Command (assuming currently on v21.2.0)

stop && wget https://bzminer.com/downloads/bzminer_v21.3.0_linux.tar.gz && tar -xvf bzminer_v21.3.0_linux.tar.gz && cp -adpR bzminer_v21.3.0_linux/bzminer /app-data/miners/bzminer-21.2.0 && start

Checksums

bzminer_v21.3.0_windows.zip:

MD5: d4bff1912fd6e9f821a58f9f7cf2a03a
SHA256: ec3bc573cab1e0de81f19cd638de98ab3fce7cc734260c9efb6177368e4fc2cc

bzminer_v21.30_linux.tar.gz:

MD5: 4da73452678444a3d64379842ac295be
SHA256: 6290df21cb3f6ad2a8fbb0cda2bcb7d66de2c08dcc37976cac6c7a65dc0d443d

BzMiner v21.2.0

Release v21.2.0 of BzMiner. All feedback is welcome ;)

-- What's in this release (v21.2.0)

x Updated Dynex for algo change
x Updated Dynex auto chip tuning
x Fixed instant crashes for many people (Default disable_cpu_metrics to true)

https://www.bzminer.com/releases/v21.2.0/

Be sure to check out the config generator if having trouble setting up

https://www.bzminer.com/config-generator/

Thanks Son of a Tech for the BC-250! https://www.youtube.com/channel/UC0WNX0de8I1fgKUrjxiPaRA

--- Dynex Notes ---

• Fine tuning dynex_pow_ratio will likely give you better results than default settings
• intensity option will adjust how much vram is allowed to be used
• Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

• This is an array of values, one for each gpu

• In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

• In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

• In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

• A value of 0.0 will mine ONLY POUW

• A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

• A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

• A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

• A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

• A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

-- Known Issues

• AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
• Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
• If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
• Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
• If Nvidia memory temps are not showing, please update to latest nvidia driver
• Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="21.2.0"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.2.0" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Hive OS Update Command (assuming currently on v21.1.5)

wget https://bzminer.com/downloads/bzminer_v21.2.0_linux.tar.gz; tar -xvf bzminer_v21.2.0_linux.tar.gz; miner stop; cp bzminer_v21.2.0_linux/bzminer /hive/miners/bzminer/21.1.5/; miner start

Rave OS Update Command (assuming currently on v21.1.5)

stop && wget https://bzminer.com/downloads/bzminer_v21.2.0_linux.tar.gz && tar -xvf bzminer_v21.2.0_linux.tar.gz && cp -adpR bzminer_v21.2.0_linux/bzminer /app-data/miners/bzminer-21.1.5 && start

Checksums

bzminer_v21.2.0_windows.zip:

MD5: 10519ca7dec8ec40374b41cddf0ab812
SHA256: 36e4759099cd7e42875c4b0b00f2e9b23b530cae8c56d351ec262f723131dcf6

bzminer_v21.2.0_linux.tar.gz:

MD5: 6221a36c29dee64cab29e5641131b296
SHA256: d6ecb7bb78fd91947a384982f2d20097f4934080a422120107b13210c5204fa7

BzMiner v21.1.5

Release v21.1.5 of BzMiner. All feedback is welcome ;)

-- What's in this release (v21.1.5)

x New Coin: aidepin
x New Coin: aipg
x Warthog: Optimized and fixed some stability issues
x Warthog: Fixed crashing from previous beta
x Warthog: Added CPU metrics (only linux has power and temp currently)
x Warthog: Fixed CPUs showing up as GPU
x Dynex: Fixed crashes every hour or so
x New option: warthog_cache_config default is 0
x New option: warthog_max_ram_gb is now a decimal
x New option: disable_cpu_metrics set this to true if you experience crashing at startup
x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize
x NOTE: Please reset all warthog_verus_hr_target configs

https://www.bzminer.com/releases/v21.1.5/

Be sure to check out the config generator if having trouble setting up

https://www.bzminer.com/config-generator/

Thanks Son of a Tech for the BC-250! https://www.youtube.com/channel/UC0WNX0de8I1fgKUrjxiPaRA

--- Dynex Notes ---

• Fine tuning dynex_pow_ratio will likely give you better results than default settings
• intensity option will adjust how much vram is allowed to be used
• Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

• This is an array of values, one for each gpu

• In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

• In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

• In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

• A value of 0.0 will mine ONLY POUW

• A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

• A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

• A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

• A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

• A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

-- Known Issues

• AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
• Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
• If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
• Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
• If Nvidia memory temps are not showing, please update to latest nvidia driver
• Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="21.1.5"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.1.5" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Hive OS Update Command (assuming currently on v21.1.1)

wget https://bzminer.com/downloads/bzminer_v21.1.5_linux.tar.gz; tar -xvf bzminer_v21.1.5_linux.tar.gz; miner stop; cp bzminer_v21.1.5_linux/bzminer /hive/miners/bzminer/21.1.1/; miner start

Rave OS Update Command (assuming currently on v21.1.1)

stop && wget https://bzminer.com/downloads/bzminer_v21.1.5_linux.tar.gz && tar -xvf bzminer_v21.1.5_linux.tar.gz && cp -adpR bzminer_v21.1.5_linux/bzminer /app-data/miners/bzminer-21.1.1 && start

Checksums

bzminer_v21.1.5_windows.zip:

MD5: 10519ca7dec8ec40374b41cddf0ab812
SHA256: 36e4759099cd7e42875c4b0b00f2e9b23b530cae8c56d351ec262f723131dcf6

bzminer_v21.1.5_linux.tar.gz:

MD5: 6221a36c29dee64cab29e5641131b296
SHA256: d6ecb7bb78fd91947a384982f2d20097f4934080a422120107b13210c5204fa7

BzMiner v21.1.4b8 BETA!

This is a beta bz version:

x Warthog: Added node RPC support (to connect to node, use http://ipaddress:port)
x Warthog: Fixed crashing from previous beta
x Warthog: Optimized and fixed some stability issues
x Warthog: Added CPU metrics (only linux has power and temp currently)
x Warthog: new option warthog_cache_config default is 0
x Warthog: option warthog_max_ram_gb is now a decimal
x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize
x NOTE: Please reset all warthog_verus_hr_target configs

Install scripts

MMPOS: (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.1.4b8" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/v21.1.4b8/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Minerstat:

export version="21.1.4b8"; mstop; cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/v21.1.4b8/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

Hive OS:

wget https://github.com/bzminer/bzminer/releases/download/v21.1.4b8/bzminer_v21.1.4b8_linux.tar.gz; tar -xvf bzminer_v21.1.4b8_linux.tar.gz; miner stop; cp bzminer_v21.1.4b8_linux/bzminer /hive/miners/bzminer/21.1.1/; miner start

Rave OS:

stop && wget https://github.com/bzminer/bzminer/releases/download/v21.1.4b8/bzminer_v21.1.4b8_linux.tar.gz && tar -xvf bzminer_v21.1.4b8_linux.tar.gz && cp -adpR bzminer_v21.1.4b8_linux/bzminer /app-data/miners/bzminer-21.1.1 && start

BzMiner v21.1.3b3 BETA!

This is a beta bz version:

x Warthog: Optimized and fixed some stability issues
x Warthog: Added CPU metrics (only linux has power and temp currently)
x Warthog: new option warthog_cache_config default is 0
x Warthog: option warthog_max_ram_gb is now a decimal
x NOTE: Please wait 10-15 minutes for results to reach a balance and stabilize

Install scripts

MMPOS: (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.1.3b3" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/v21.1.3b3/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Minerstat:

export version="21.1.3b3"; mstop; cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/v21.1.3b3/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

Hive OS:

wget https://github.com/bzminer/bzminer/releases/download/v21.1.3b3/bzminer_v21.1.3b3_linux.tar.gz; tar -xvf bzminer_v21.1.3b3_linux.tar.gz; miner stop; cp bzminer_v21.1.3b3_linux/bzminer /hive/miners/bzminer/21.1.1/; miner start

Rave OS:

stop && wget https://github.com/bzminer/bzminer/releases/download/v21.1.3b3/bzminer_v21.1.3b3_linux.tar.gz && tar -xvf bzminer_v21.1.3b3_linux.tar.gz && cp -adpR bzminer_v21.1.3b3_linux/bzminer /app-data/miners/bzminer-21.1.1 && start

BzMiner v21.1.0b4 BETA!

This is a beta bz version:

x Ironfish: working again
x Warthog: improved verus hashrate
x Warthog: showing share difficulty
x Warthog: http api providing janus score per device
x Other small updates

Install scripts

MMPOS: (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.1.0b4" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/v21.1.0/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Minerstat:

export version="21.1.0b4"; mstop; cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/v21.1.0/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

Hive OS:

wget https://github.com/bzminer/bzminer/releases/download/v21.1.0/bzminer_v21.1.0b4_linux.tar.gz; tar -xvf bzminer_v21.1.0b4_linux.tar.gz; miner stop; cp bzminer_v21.1.0b4_linux/bzminer /hive/miners/bzminer/20.0.0/; miner start

Rave OS:

stop && wget https://github.com/bzminer/bzminer/releases/download/v21.1.0/bzminer_v21.1.0b4_linux.tar.gz && tar -xvf bzminer_v21.1.0b4_linux.tar.gz && cp -adpR bzminer_v21.1.0b4_linux/bzminer /app-data/miners/bzminer-20.0.0 && start

BzMiner v21.0.3

Release v21.0.3 of BzMiner. All feedback is welcome ;)

-- What's in this release (v21.0.3)

x New Coin: warthog
x Added option warthog_cpu_threads - Number of threads to use to compute the verus hashes. Default is 0, use number of cores available
x Added option warthog_max_ram_gb - Amount of RAM to use to store sha hashes while cpu threads are calculating verus hashes. Default is 4gb. Value of 0 will use max ram minux 1gb. If not enough avaiable ram, will use available ram minus 1gb. if still not enough ram, will use available ram / 2.
x Added option warthog_verus_hr_target - Specify the amount of verus hashrate each gpu should provide to the verus workers. If all gpu's have a verus hashrate specified, calibration will be skipped. Hashrates are specified in hashes per second, and are separated by spaces. Default is 0

• NOTE - Lower end cpus, or rigs with under 2gb may not be able to mine warthog, or may have very bad hashrate
• NOTE - Warthog gpu performance will depend on many variables, such as PCI generation (1,2,3,4), PCI lanes (1x, 4x, 8x, 16x), (if on risers, higher gen speeds can cause pci errors if cables are criss-crossed with other cables due to interference, leading to possible invalid sha shares sometimes), how many gpus are currently participating, ram speeds, ram and cpu caches, cpu speeds, and even the os (windows/linux) can have an impact. Just be aware that there are many reasons why different setups may cause the same card to have drasticaly different results from other setups using that same card.
• NOTE - Using all available processors will have a negative impact. If manually specifying threads, keep in mind that the os needs a processor to work on, bz itself needs a processor, gpus each need their own threads (they can share processors), and there's an additional processor pinned to 100% usage to distribute the work among the verus workers. bz will automatically reduce thread count to account for these if no thread count is specified.
• NOTE - Status column now shows gpu hashrate/verus hashrate, where gpu hashrate is how many sha hashes the gpu is doing, and verus hashrate is how many sha hashes its currently providing the verus workers. those numbers across the gpus should add up to match the verus hr in the pool status
  x Temporarily disabled Ironfish (next update should have ironfish back)
  x Other bug fixes

Thanks Son of a Tech for the BC-250! https://www.youtube.com/channel/UC0WNX0de8I1fgKUrjxiPaRA

--- Dynex Notes ---

• Fine tuning dynex_pow_ratio will likely give you better results than default settings
• intensity option will adjust how much vram is allowed to be used
• Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

• This is an array of values, one for each gpu

• In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

• In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

• In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

• A value of 0.0 will mine ONLY POUW

• A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

• A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

• A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

• A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

• A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

https://www.bzminer.com/releases/v20.0.0/

-- Known Issues

• AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
• Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
• If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
• Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
• If Nvidia memory temps are not showing, please update to latest nvidia driver
• Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="21.0.3"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command (Note: put in Initiate command prior to miner launch field in miner profile ->advanced)

export version="21.0.3" # Example version
if [ -f "/tmp/bzminer_v${version}_linux.tar.gz" ]; then
exit 0
else
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/
fi

Hive OS Update Command (assuming currently on v20.0.0)

wget https://bzminer.com/downloads/bzminer_v21.0.3_linux.tar.gz; tar -xvf bzminer_v21.0.3_linux.tar.gz; miner stop; cp bzminer_v21.0.3_linux/bzminer /hive/miners/bzminer/20.0.0/; miner start

Rave OS Update Command (assuming currently on v20.0.0)

stop && wget https://bzminer.com/downloads/bzminer_v21.0.3_linux.tar.gz && tar -xvf bzminer_v21.0.3_linux.tar.gz && cp -adpR bzminer_v21.0.3_linux/bzminer /app-data/miners/bzminer-20.0.0 && start

Checksums

bzminer_v21.0.3_windows.zip:

MD5: d73c83817048bc9646570f855510c950
SHA256: 307c39a7bfeb1935de6c1305c8868b83248e9eed3c2d26cdcb7e791cac7b5309

bzminer_v21.0.3_linux.tar.gz:

MD5: 7e1e09521fe1c936894e6f35e6afd7df
SHA256: 111f3f047e91a0b46524ec9dd884469a4c47c185d9b117a36c2e08a2f5389b29

BzMiner v20.0.0

Release v20.0.0 of BzMiner. All feedback is welcome ;)

-- What's in this release (v20.0.0)

x Decred: Added pool support
x New coin: nexellia
x New coin: dint (DinarTether)
x New coin: Larissa

--- Dynex Notes ---

• Fine tuning dynex_pow_ratio will likely give you better results than default settings
• intensity option will adjust how much vram is allowed to be used
• Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

• This is an array of values, one for each gpu

• In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

• In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

• In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

• A value of 0.0 will mine ONLY POUW

• A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

• A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

• A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

• A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

• A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

https://www.bzminer.com/releases/v20.0.0/

-- Known Issues

• AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
• Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
• If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
• Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
• If Nvidia memory temps are not showing, please update to latest nvidia driver
• Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="20.0.0"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command

export version="20.0.0" # Example version
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; agent-stop; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/; agent-start

Hive OS Update Command (assuming currently on v19.3.1)

wget https://bzminer.com/downloads/bzminer_v20.0.0_linux.tar.gz; tar -xvf bzminer_v20.0.0_linux.tar.gz; miner stop; cp bzminer_v20.0.0_linux/bzminer /hive/miners/bzminer/19.3.1/; miner start

Rave OS Update Command (assuming currently on v19.3.1)

stop && wget https://bzminer.com/downloads/bzminer_v20.0.0_linux.tar.gz && tar -xvf bzminer_v20.0.0_linux.tar.gz && cp -adpR bzminer_v20.0.0_linux/bzminer /app-data/miners/bzminer-19.3.1 && start

Checksums

bzminer_v20.0.0_windows.zip:

MD5: 706c8c55ad195174f7779f35abf8570e
SHA256: 4590c90ac8387cfd25b2c71f59c6adbc9e8965f2b81d682eda39b1ddb046e09b

bzminer_v20.0.0_linux.tar.gz:

MD5: 36090d2d79259e796fef7070065b62ce
SHA256: 37a7ce966f47f8b5bc4c82243953b6e8b748b611a04add16a00b88e3de02e5dc

BzMiner v19.3.1

Release v19.3.1 of BzMiner. All feedback is welcome ;)

-- What's in this release (v19.3.1)

x Dynex: Updated to latest protocol
x Added new config option 'ssl_verify'
x Dynex: caching jobs are enabled by default (value 1). can change with 'dynex_cache_mallob' option

--- Dynex Notes ---

• Fine tuning dynex_pow_ratio will likely give you better results than default settings
• intensity option will adjust how much vram is allowed to be used
• Intel ARC support still only for POW

-- dynex_pow_ratio --
Bz allows you to dedicate individual cards to either POW or POUW on Dynex using this option.

• This is an array of values, one for each gpu

• In config.txt , an example for 3 gpus would be "dynex_pow_ratio": [1.0, 1.0, 1.0]

• In command line, and example for 3 gpus would be --dynex_pow_ratio 1.0 1.0 1.0

• In hive, extra config args (notice the quotes around the array), an example for 3 gpus would be "dynex_pow_ratio": "[1.0, 1.0, 1.0]"

• A value of 0.0 will mine ONLY POUW

• A value of 1.0 (Default) will mine both POUW and POW. It will choose a POW ratio that matches POUW

• A value of 2.0 will fully mine only POW. Any value higher than 1.0 will not mine POUW

• A value between 0.0 and 1.0 will determine how much POW is mined, values closer to 1.0 will mine POW more intensely, while values closer to 0.0 will mine POW less intensely

• A value between 1.0 and 2.0 will determine how intensely to mine ONLY POW

• A statistic in the status column of the tables called "pow slip" will show you how much POW hashrate above or below the POUW hashrate you are doing. If below (-), you should increase your pow hashrate. If above, you are wasting resources doing unecessary POW hashrate and you should lower your POW hashrate. NOTE: It is not possible to be rewarded for POW hashrate above your POUW hashrate!

-- Dynex intensity --
The "intensity" option in Bz will determine how much vram to utilize to mine Dynex. a value of 64 (highest), will use all available ram, a value of 1 will use the minimum amount of ram. Default is 0 (converts to 64 internally)

https://www.bzminer.com/releases/v19.3.1/

-- Known Issues

• AMD polaris cards (eg. rx470, rx580) may not work with rethereum right now. Looking into this soon
• Only AMD opencl driver 21.50.2 and higher is currently supported, so update your amd driver if you run into opencl errors
• If you run into issues allocating larger Nexa LUT on Nvidia cards, please update Nvidia drivers
• Nvidia driver 530 - 535 have a bug that reports wrong clock frequencies. oc's should still be applied correctly. Please update to very latest nvidia driver (535 or higher) which appears to have fixed this bug
• If Nvidia memory temps are not showing, please update to latest nvidia driver
• Nexa is not working on Intel currently

NOTE: Nexa development is continued joint effort with Lolliedieb from lolMiner

Minerstat update command:

export version="19.3.1"; mstop; cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; sudo cp bzminer_v${version}_linux/bzminer /home/minerstat/minerstat-os/clients/bzminer; mstart

MMPOS Update Command

export version="19.3.1" # Example version
cd /tmp; wget https://bzminer.com/downloads/bzminer_v${version}_linux.tar.gz; tar -xvf bzminer_v${version}_linux.tar.gz; agent-stop; sudo cp -adpR bzminer_v${version}_linux/bzminer /opt/mmp/miners/bzminer/; agent-start

Hive OS Update Command (assuming currently on v19.3.0)

wget https://bzminer.com/downloads/bzminer_v19.3.1_linux.tar.gz; tar -xvf bzminer_v19.3.1_linux.tar.gz; miner stop; cp bzminer_v19.3.1_linux/bzminer /hive/miners/bzminer/19.3.0/; miner start

Rave OS Update Command (assuming currently on v19.3.0)

stop && wget https://bzminer.com/downloads/bzminer_v19.3.1_linux.tar.gz && tar -xvf bzminer_v19.3.1_linux.tar.gz && cp -adpR bzminer_v19.3.1_linux/bzminer /app-data/miners/bzminer-19.3.0 && start

Checksums

bzminer_v19.3.1_windows.zip:

MD5: 492955499b7d7586e973d4a1d2ef5172
SHA256: ede29c2bab4cfce985e54a153e4472b4d518a217d0e55f2c24ebb8847b810da8

bzminer_v19.3.1_linux.tar.gz:

MD5: 0cbc0d7d93311f82709ba0caf29cdca6
SHA256: d993d971b094989f2de27eccbc72272920447383c7585c6fb384c615da9e2688