Merge remote-tracking branch 'qmk/develop' into develop

* qmk/develop: (24 commits)
  [Keyboard] add Lefty keyboard (qmk#14898)
  [Keyboard] Add support for bm65rgb, a revival of qmk#13361  (qmk#14800)
  [Keymap] Add personal lily58 keymap (qmk#14834)
  [Keyboard] binepad bn009 (qmk#14881)
  [Keyboard] Add MW65 Series PCB (qmk#14939)
  [Docs] Add instructions to create keymap before proceeding (qmk#14945)
  [Keyboard] Cradio keyboard (qmk#14946)
  [Keyboard] update(readme): with PCB reset instructions (qmk#14961)
  [Keymap] Add VLC keymap (qmk#14956)
  [Keyboard] Docs/folder organization and info json fixed (qmk#14239)
  Fix white spacing issues in kb files (qmk#14963)
  Optimize matrix scanning by removing variable shifts (qmk#14947)
  [Keymap] Add planck/pjanx and keebio/nyquist/pjanx keymaps (qmk#13115)
  [Keyboard] add ProjectCain Vault35; update Vault45 (qmk#13652)
  Add MAGIC_TOGGLE_GUI line to main keycode documentation (qmk#14959)
  Document `MAGIC` feature (qmk#14301)
  [Keyboard] Add minimon/Index tab 13x6 ortho (qmk#14765)
  [Keyboard] add support for Phoenix45_Ortho PCB (qmk#14798)
  [Keymap] Add via keymap for meishi2 (qmk#14892)
  Update mcu_selection.mk with current ChibiOS path (qmk#14909)
  ...

docs/config_options.md

@@ -404,6 +404,8 @@ However, this will automatically disable the legacy TMK Macros and Functions fea
 
 Use these to enable or disable building certain features. The more you have enabled the bigger your firmware will be, and you run the risk of building a firmware too large for your MCU.
 
+* `MAGIC_ENABLE`
+  * MAGIC actions (BOOTMAGIC without the boot)
 * `BOOTMAGIC_ENABLE`
   * Virtual DIP switch configuration
 * `MOUSEKEY_ENABLE`

docs/custom_quantum_functions.md

@@ -149,7 +149,7 @@ This is useful for setting up stuff that you may need elsewhere, but isn't hardw
 * GPIO pin initialisation: `void matrix_init_pins(void)`
   * This needs to perform the low-level initialisation of all row and column pins. By default this will initialise the input/output state of each of the GPIO pins listed in `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no initialisation of pin state will occur within QMK itself, instead deferring to the keyboard's override.
 * `COL2ROW`-based row reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
-* `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)`
+* `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter)`
 * `DIRECT_PINS`-based reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)`
   * These three functions need to perform the low-level retrieval of matrix state of relevant input pins, based on the matrix type. Only one of the functions should be implemented, if needed. By default this will iterate through `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, configuring the inputs and outputs based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no manipulation of matrix GPIO pin state will occur within QMK itself, instead deferring to the keyboard's override.
 

docs/keycodes.md

@@ -344,6 +344,7 @@ See also: [Magic Keycodes](keycodes_magic.md)
 |`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides                                     |
 |`MAGIC_NO_GUI`                    |`GUI_OFF`|Disable the GUI keys                                                      |
 |`MAGIC_UNNO_GUI`                  |`GUI_ON` |Enable the GUI keys                                                       |
+|`MAGIC_TOGGLE_GUI`                |`GUI_TOG`|Toggles the status of the GUI keys                                        |
 |`MAGIC_SWAP_GRAVE_ESC`            |`GE_SWAP`|Swap <code>&#96;</code> and Escape                                        |
 |`MAGIC_UNSWAP_GRAVE_ESC`          |`GE_NORM`|Unswap <code>&#96;</code> and Escape                                      |
 |`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |`BS_SWAP`|Swap `\` and Backspace                                                    |

docs/newbs_getting_started.md

@@ -194,7 +194,7 @@ You can also set your default keymap name. Most people use their GitHub username
 
     qmk config user.keymap=<github_username>
 
-After this you can leave those arguments off and compile your keyboard like this:
+The keyboard can now be compiled without arguments using the following command after creating your keymap in the next section:
 
     qmk compile
 

keyboards/anavi/macropad8/keymaps/vlc/keymap.c

@@ -0,0 +1,138 @@
+ /* Copyright 2021 Marc Nause <marc.nause@gmx.de>
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+    _PLAY,
+    _FRAME,
+    _DVD,
+    _FN
+};
+
+#define KC_X0 LT(_FN, KC_ESC)
+
+#ifdef RGBLIGHT_ENABLE
+// How long (in ms) to wait between animation steps for the rainbow mode
+const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {60, 30, 15};
+// How long (in milliseconds) to wait between animation steps for each of the "Swirling rainbow" animations
+const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {20, 10, 4};
+#endif
+
+/*
+ * The keymap contains 3 layers for vlc hotkeys and a 4th layer
+ * for controlling the backlighting and the underlighting.
+ *
+ * See https://wiki.videolan.org/QtHotkeys/ for VLC hotkeys
+ *
+ * - Layer for VLC media play hotkeys:
+ * Space                 - Play/pause
+ * P                     - Previous track
+ * S                     - Stop
+ * N                     - Next track
+ * +                     - Slower
+ * -                     - Faster
+ * =                     - Normal rate
+ *
+ * - Layer for VLC frame control hotkeys:
+ * Shift + right arrow   - Jump 5 seconds forward
+ * Alt + right arrow     - Jump 10 seconds forward
+ * Control + right arrow - Jump 1 minute forward
+ * E                     - Next frame
+ * Shift + left arrow    - Jump 5 seconds back
+ * Alt + left arrow      - Jump 10 seconds back
+ * Control + left arrow  - Jump 1 minute back
+ *
+  * - Layer for VLC DVD hotkeys:
+ * Shift + M             - Disc menu
+ * Arrow up              - Navigate menu (up)
+ * Enter                 - Select menu entry
+ * Shift + V             - Toggle subtitles
+ * Arrow left            - Navigate menu (left)
+ * Arrow down            - Navigate menu (down)
+ * Arrow right           - Navigate menu (right)
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_PLAY] = LAYOUT_ortho_2x4(
+     KC_SPC, KC_P, KC_S, KC_N,
+     KC_KP_PLUS, KC_KP_MINUS, KC_KP_EQUAL, TO(_FRAME)
+  ),
+
+  [_FRAME] = LAYOUT_ortho_2x4(
+     LSFT(KC_RIGHT), LALT(KC_RIGHT), LCTL(KC_RIGHT), KC_E,
+     LSFT(KC_LEFT), LALT(KC_LEFT), LCTL(KC_LEFT), TO(_DVD)
+  ),
+
+  [_DVD] = LAYOUT_ortho_2x4(
+     LSFT(KC_M), KC_UP, KC_ENTER, LSFT(KC_V),
+     KC_LEFT, KC_DOWN, KC_RIGHT, TO(_FN)
+  ),
+
+  [_FN] = LAYOUT_ortho_2x4(
+     RGB_TOG, RGB_MOD, RGB_M_R, RGB_M_SN,
+     BL_TOGG, BL_STEP, BL_BRTG, TO(_PLAY)
+  )
+};
+
+#ifdef OLED_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+}
+
+void oled_task_user(void) {
+  // Host Keyboard Layer Status
+  oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false);
+  oled_write_P(PSTR("Layer: "), false);
+
+  switch (get_highest_layer(layer_state)) {
+    case _PLAY:
+      oled_write_ln_P(PSTR("VLC Play"), false);
+      break;
+    case _FRAME:
+      oled_write_ln_P(PSTR("VLC Frame"), false);
+      break;
+    case _DVD:
+      oled_write_ln_P(PSTR("VLC DVD"), false);
+      break;
+    case _FN:
+      oled_write_ln_P(PSTR("FN "), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("N/A"), false);
+  }
+
+  // Host Keyboard LED Status
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(PSTR("Num Lock: "), false);
+  oled_write_ln_P(led_state.num_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Caps Lock: "), false);
+  oled_write_ln_P(led_state.caps_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Scroll Lock: "), false);
+  oled_write_ln_P(led_state.scroll_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Backlit: "), false);
+  oled_write_ln_P(is_backlight_enabled() ? PSTR("On") : PSTR("Off"), false);
+#ifdef RGBLIGHT_ENABLE
+  static char rgbStatusLine1[26] = {0};
+  snprintf(rgbStatusLine1, sizeof(rgbStatusLine1), "RGB Mode: %d", rgblight_get_mode());
+  oled_write_ln(rgbStatusLine1, false);
+  static char rgbStatusLine2[26] = {0};
+  snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val());
+  oled_write_ln(rgbStatusLine2, false);
+#endif
+}
+#endif

keyboards/binepad/bn009/bn009.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bn009.h"

keyboards/binepad/bn009/bn009.h

@@ -0,0 +1,28 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+#define LAYOUT( \
+      k00, k01, k02, \
+      k10, k11, k12, \
+      k20, k21, k22  \
+) \
+{ \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }, \
+    { k20, k21, k22 } \
+} 
+

keyboards/binepad/bn009/config.h

@@ -0,0 +1,78 @@
+/* Copyright 2020 BINEPAD
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4249 // Binepad
+#define PRODUCT_ID      0x4295
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Binepad
+#define PRODUCT         BN009
+
+/* Key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+#define MATRIX_ROW_PINS { D2, D1, D0 }
+#define MATRIX_COL_PINS { B6, B5, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+
+ */
+//#define FORCE_NKRO
+

keyboards/binepad/bn009/info.json

@@ -0,0 +1,10 @@
+{
+  "keyboard_name": "BN009",
+  "url": "https://binepad.com",
+  "maintainer": "binepad",
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}]
+    }
+  }
+}

keyboards/binepad/bn009/keymaps/default/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2021 BINEPAD 
+	  * 
+	  * This program is free software: you can redistribute it and/or modify 
+	  * it under the terms of the GNU General Public License as published by 
+	  * the Free Software Foundation, either version 2 of the License, or 
+	  * (at your option) any later version. 
+	  * 
+	  * This program is distributed in the hope that it will be useful, 
+	  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+	  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+	  * GNU General Public License for more details. 
+	  * 
+	  * You should have received a copy of the GNU General Public License 
+	  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+	  */ 
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+
+[0] = LAYOUT(
+  KC_7,    KC_8,    KC_9,
+  KC_4,    KC_5,    KC_6,
+  KC_1,    KC_2,    KC_3
+),
+
+
+[1] = LAYOUT(
+  KC_NO,   KC_NO,   KC_NO,
+  KC_NO,   KC_NO,   KC_NO,
+  KC_NO,   KC_NO,   KC_NO
+),
+
+
+[2] = LAYOUT(
+  KC_NO,   KC_NO,   KC_NO,
+  KC_NO,   KC_NO,   KC_NO,
+  KC_NO,   KC_NO,   KC_NO
+)
+
+};

keyboards/binepad/bn009/keymaps/default/readme.md

@@ -0,0 +1 @@
+# bn009 - Default layout