replicationfabrics.go

package siterecovery

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"context"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"net/http"
)

// ReplicationFabricsClient is the client for the ReplicationFabrics methods of the Siterecovery service.
type ReplicationFabricsClient struct {
	BaseClient
}

// NewReplicationFabricsClient creates an instance of the ReplicationFabricsClient client.
func NewReplicationFabricsClient(subscriptionID string, resourceGroupName string, resourceName string) ReplicationFabricsClient {
	return NewReplicationFabricsClientWithBaseURI(DefaultBaseURI, subscriptionID, resourceGroupName, resourceName)
}

// NewReplicationFabricsClientWithBaseURI creates an instance of the ReplicationFabricsClient client.
func NewReplicationFabricsClientWithBaseURI(baseURI string, subscriptionID string, resourceGroupName string, resourceName string) ReplicationFabricsClient {
	return ReplicationFabricsClient{NewWithBaseURI(baseURI, subscriptionID, resourceGroupName, resourceName)}
}

// CheckConsistency the operation to perform a consistency check on the fabric.
// Parameters:
// fabricName - fabric name.
func (client ReplicationFabricsClient) CheckConsistency(ctx context.Context, fabricName string) (result ReplicationFabricsCheckConsistencyFuture, err error) {
	req, err := client.CheckConsistencyPreparer(ctx, fabricName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "CheckConsistency", nil, "Failure preparing request")
		return
	}

	result, err = client.CheckConsistencySender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "CheckConsistency", result.Response(), "Failure sending request")
		return
	}

	return
}

// CheckConsistencyPreparer prepares the CheckConsistency request.
func (client ReplicationFabricsClient) CheckConsistencyPreparer(ctx context.Context, fabricName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/checkConsistency", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CheckConsistencySender sends the CheckConsistency request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) CheckConsistencySender(req *http.Request) (future ReplicationFabricsCheckConsistencyFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// CheckConsistencyResponder handles the response to the CheckConsistency request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) CheckConsistencyResponder(resp *http.Response) (result Fabric, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Create the operation to create an Azure Site Recovery fabric (for e.g. Hyper-V site)
// Parameters:
// fabricName - name of the ASR fabric.
// input - fabric creation input.
func (client ReplicationFabricsClient) Create(ctx context.Context, fabricName string, input FabricCreationInput) (result ReplicationFabricsCreateFuture, err error) {
	req, err := client.CreatePreparer(ctx, fabricName, input)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Create", nil, "Failure preparing request")
		return
	}

	result, err = client.CreateSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Create", result.Response(), "Failure sending request")
		return
	}

	return
}

// CreatePreparer prepares the Create request.
func (client ReplicationFabricsClient) CreatePreparer(ctx context.Context, fabricName string, input FabricCreationInput) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}", pathParameters),
		autorest.WithJSON(input),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateSender sends the Create request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) CreateSender(req *http.Request) (future ReplicationFabricsCreateFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// CreateResponder handles the response to the Create request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) CreateResponder(resp *http.Response) (result Fabric, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Delete the operation to delete or remove an Azure Site Recovery fabric.
// Parameters:
// fabricName - ASR fabric to delete
func (client ReplicationFabricsClient) Delete(ctx context.Context, fabricName string) (result ReplicationFabricsDeleteFuture, err error) {
	req, err := client.DeletePreparer(ctx, fabricName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Delete", nil, "Failure preparing request")
		return
	}

	result, err = client.DeleteSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Delete", result.Response(), "Failure sending request")
		return
	}

	return
}

// DeletePreparer prepares the Delete request.
func (client ReplicationFabricsClient) DeletePreparer(ctx context.Context, fabricName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/remove", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) DeleteSender(req *http.Request) (future ReplicationFabricsDeleteFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// Get gets the details of an Azure Site Recovery fabric.
// Parameters:
// fabricName - fabric name.
func (client ReplicationFabricsClient) Get(ctx context.Context, fabricName string) (result Fabric, err error) {
	req, err := client.GetPreparer(ctx, fabricName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Get", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Get", resp, "Failure sending request")
		return
	}

	result, err = client.GetResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Get", resp, "Failure responding to request")
	}

	return
}

// GetPreparer prepares the Get request.
func (client ReplicationFabricsClient) GetPreparer(ctx context.Context, fabricName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSender sends the Get request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) GetSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// GetResponder handles the response to the Get request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) GetResponder(resp *http.Response) (result Fabric, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// List gets a list of the Azure Site Recovery fabrics in the vault.
func (client ReplicationFabricsClient) List(ctx context.Context) (result FabricCollectionPage, err error) {
	result.fn = client.listNextResults
	req, err := client.ListPreparer(ctx)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "List", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.fc.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "List", resp, "Failure sending request")
		return
	}

	result.fc, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "List", resp, "Failure responding to request")
	}

	return
}

// ListPreparer prepares the List request.
func (client ReplicationFabricsClient) ListPreparer(ctx context.Context) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListSender sends the List request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) ListSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ListResponder handles the response to the List request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) ListResponder(resp *http.Response) (result FabricCollection, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listNextResults retrieves the next set of results, if any.
func (client ReplicationFabricsClient) listNextResults(lastResults FabricCollection) (result FabricCollection, err error) {
	req, err := lastResults.fabricCollectionPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "listNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "listNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "listNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListComplete enumerates all values, automatically crossing page boundaries as required.
func (client ReplicationFabricsClient) ListComplete(ctx context.Context) (result FabricCollectionIterator, err error) {
	result.page, err = client.List(ctx)
	return
}

// MigrateToAad the operation to migrate an Azure Site Recovery fabric to AAD.
// Parameters:
// fabricName - ASR fabric to migrate.
func (client ReplicationFabricsClient) MigrateToAad(ctx context.Context, fabricName string) (result ReplicationFabricsMigrateToAadFuture, err error) {
	req, err := client.MigrateToAadPreparer(ctx, fabricName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "MigrateToAad", nil, "Failure preparing request")
		return
	}

	result, err = client.MigrateToAadSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "MigrateToAad", result.Response(), "Failure sending request")
		return
	}

	return
}

// MigrateToAadPreparer prepares the MigrateToAad request.
func (client ReplicationFabricsClient) MigrateToAadPreparer(ctx context.Context, fabricName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/migratetoaad", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// MigrateToAadSender sends the MigrateToAad request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) MigrateToAadSender(req *http.Request) (future ReplicationFabricsMigrateToAadFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// MigrateToAadResponder handles the response to the MigrateToAad request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) MigrateToAadResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// Purge the operation to purge(force delete) an Azure Site Recovery fabric.
// Parameters:
// fabricName - ASR fabric to purge.
func (client ReplicationFabricsClient) Purge(ctx context.Context, fabricName string) (result ReplicationFabricsPurgeFuture, err error) {
	req, err := client.PurgePreparer(ctx, fabricName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Purge", nil, "Failure preparing request")
		return
	}

	result, err = client.PurgeSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "Purge", result.Response(), "Failure sending request")
		return
	}

	return
}

// PurgePreparer prepares the Purge request.
func (client ReplicationFabricsClient) PurgePreparer(ctx context.Context, fabricName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// PurgeSender sends the Purge request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) PurgeSender(req *http.Request) (future ReplicationFabricsPurgeFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// PurgeResponder handles the response to the Purge request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) PurgeResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// ReassociateGateway the operation to move replications from a process server to another process server.
// Parameters:
// fabricName - the name of the fabric containing the process server.
// failoverProcessServerRequest - the input to the failover process server operation.
func (client ReplicationFabricsClient) ReassociateGateway(ctx context.Context, fabricName string, failoverProcessServerRequest FailoverProcessServerRequest) (result ReplicationFabricsReassociateGatewayFuture, err error) {
	req, err := client.ReassociateGatewayPreparer(ctx, fabricName, failoverProcessServerRequest)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "ReassociateGateway", nil, "Failure preparing request")
		return
	}

	result, err = client.ReassociateGatewaySender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "ReassociateGateway", result.Response(), "Failure sending request")
		return
	}

	return
}

// ReassociateGatewayPreparer prepares the ReassociateGateway request.
func (client ReplicationFabricsClient) ReassociateGatewayPreparer(ctx context.Context, fabricName string, failoverProcessServerRequest FailoverProcessServerRequest) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/reassociateGateway", pathParameters),
		autorest.WithJSON(failoverProcessServerRequest),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ReassociateGatewaySender sends the ReassociateGateway request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) ReassociateGatewaySender(req *http.Request) (future ReplicationFabricsReassociateGatewayFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// ReassociateGatewayResponder handles the response to the ReassociateGateway request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) ReassociateGatewayResponder(resp *http.Response) (result Fabric, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RenewCertificate renews the connection certificate for the ASR replication fabric.
// Parameters:
// fabricName - fabric name to renew certs for.
// renewCertificate - renew certificate input.
func (client ReplicationFabricsClient) RenewCertificate(ctx context.Context, fabricName string, renewCertificate RenewCertificateInput) (result ReplicationFabricsRenewCertificateFuture, err error) {
	req, err := client.RenewCertificatePreparer(ctx, fabricName, renewCertificate)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "RenewCertificate", nil, "Failure preparing request")
		return
	}

	result, err = client.RenewCertificateSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "siterecovery.ReplicationFabricsClient", "RenewCertificate", result.Response(), "Failure sending request")
		return
	}

	return
}

// RenewCertificatePreparer prepares the RenewCertificate request.
func (client ReplicationFabricsClient) RenewCertificatePreparer(ctx context.Context, fabricName string, renewCertificate RenewCertificateInput) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"fabricName":        autorest.Encode("path", fabricName),
		"resourceGroupName": autorest.Encode("path", client.ResourceGroupName),
		"resourceName":      autorest.Encode("path", client.ResourceName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2016-08-10"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/Subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.RecoveryServices/vaults/{resourceName}/replicationFabrics/{fabricName}/renewCertificate", pathParameters),
		autorest.WithJSON(renewCertificate),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RenewCertificateSender sends the RenewCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client ReplicationFabricsClient) RenewCertificateSender(req *http.Request) (future ReplicationFabricsRenewCertificateFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// RenewCertificateResponder handles the response to the RenewCertificate request. The method always
// closes the http.Response Body.
func (client ReplicationFabricsClient) RenewCertificateResponder(resp *http.Response) (result Fabric, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}