deployments.go

package resources

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"context"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/validation"
	"net/http"
)

// DeploymentsClient is the provides operations for working with resources and resource groups.
type DeploymentsClient struct {
	BaseClient
}

// NewDeploymentsClient creates an instance of the DeploymentsClient client.
func NewDeploymentsClient(subscriptionID string) DeploymentsClient {
	return NewDeploymentsClientWithBaseURI(DefaultBaseURI, subscriptionID)
}

// NewDeploymentsClientWithBaseURI creates an instance of the DeploymentsClient client.
func NewDeploymentsClientWithBaseURI(baseURI string, subscriptionID string) DeploymentsClient {
	return DeploymentsClient{NewWithBaseURI(baseURI, subscriptionID)}
}

// Cancel you can cancel a deployment only if the provisioningState is Accepted or Running. After the deployment is
// canceled, the provisioningState is set to Canceled. Canceling a template deployment stops the currently running
// template deployment and leaves the resource group partially deployed.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// deploymentName - the name of the deployment to cancel.
func (client DeploymentsClient) Cancel(ctx context.Context, resourceGroupName string, deploymentName string) (result autorest.Response, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "Cancel", err.Error())
	}

	req, err := client.CancelPreparer(ctx, resourceGroupName, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Cancel", nil, "Failure preparing request")
		return
	}

	resp, err := client.CancelSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Cancel", resp, "Failure sending request")
		return
	}

	result, err = client.CancelResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Cancel", resp, "Failure responding to request")
	}

	return
}

// CancelPreparer prepares the Cancel request.
func (client DeploymentsClient) CancelPreparer(ctx context.Context, resourceGroupName string, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName":    autorest.Encode("path", deploymentName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/{deploymentName}/cancel", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CancelSender sends the Cancel request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) CancelSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// CancelResponder handles the response to the Cancel request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) CancelResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// CancelAtSubscriptionScope you can cancel a deployment only if the provisioningState is Accepted or Running. After
// the deployment is canceled, the provisioningState is set to Canceled. Canceling a template deployment stops the
// currently running template deployment and leaves the resources partially deployed.
// Parameters:
// deploymentName - the name of the deployment to cancel.
func (client DeploymentsClient) CancelAtSubscriptionScope(ctx context.Context, deploymentName string) (result autorest.Response, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "CancelAtSubscriptionScope", err.Error())
	}

	req, err := client.CancelAtSubscriptionScopePreparer(ctx, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CancelAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	resp, err := client.CancelAtSubscriptionScopeSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CancelAtSubscriptionScope", resp, "Failure sending request")
		return
	}

	result, err = client.CancelAtSubscriptionScopeResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CancelAtSubscriptionScope", resp, "Failure responding to request")
	}

	return
}

// CancelAtSubscriptionScopePreparer prepares the CancelAtSubscriptionScope request.
func (client DeploymentsClient) CancelAtSubscriptionScopePreparer(ctx context.Context, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName": autorest.Encode("path", deploymentName),
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/{deploymentName}/cancel", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CancelAtSubscriptionScopeSender sends the CancelAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) CancelAtSubscriptionScopeSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// CancelAtSubscriptionScopeResponder handles the response to the CancelAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) CancelAtSubscriptionScopeResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// CheckExistence checks whether the deployment exists.
// Parameters:
// resourceGroupName - the name of the resource group with the deployment to check. The name is case
// insensitive.
// deploymentName - the name of the deployment to check.
func (client DeploymentsClient) CheckExistence(ctx context.Context, resourceGroupName string, deploymentName string) (result autorest.Response, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "CheckExistence", err.Error())
	}

	req, err := client.CheckExistencePreparer(ctx, resourceGroupName, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CheckExistence", nil, "Failure preparing request")
		return
	}

	resp, err := client.CheckExistenceSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CheckExistence", resp, "Failure sending request")
		return
	}

	result, err = client.CheckExistenceResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CheckExistence", resp, "Failure responding to request")
	}

	return
}

// CheckExistencePreparer prepares the CheckExistence request.
func (client DeploymentsClient) CheckExistencePreparer(ctx context.Context, resourceGroupName string, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName":    autorest.Encode("path", deploymentName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsHead(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CheckExistenceSender sends the CheckExistence request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) CheckExistenceSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// CheckExistenceResponder handles the response to the CheckExistence request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) CheckExistenceResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent, http.StatusNotFound),
		autorest.ByClosing())
	result.Response = resp
	return
}

// CheckExistenceAtSubscriptionScope checks whether the deployment exists.
// Parameters:
// deploymentName - the name of the deployment to check.
func (client DeploymentsClient) CheckExistenceAtSubscriptionScope(ctx context.Context, deploymentName string) (result autorest.Response, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "CheckExistenceAtSubscriptionScope", err.Error())
	}

	req, err := client.CheckExistenceAtSubscriptionScopePreparer(ctx, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CheckExistenceAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	resp, err := client.CheckExistenceAtSubscriptionScopeSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CheckExistenceAtSubscriptionScope", resp, "Failure sending request")
		return
	}

	result, err = client.CheckExistenceAtSubscriptionScopeResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CheckExistenceAtSubscriptionScope", resp, "Failure responding to request")
	}

	return
}

// CheckExistenceAtSubscriptionScopePreparer prepares the CheckExistenceAtSubscriptionScope request.
func (client DeploymentsClient) CheckExistenceAtSubscriptionScopePreparer(ctx context.Context, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName": autorest.Encode("path", deploymentName),
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsHead(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CheckExistenceAtSubscriptionScopeSender sends the CheckExistenceAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) CheckExistenceAtSubscriptionScopeSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// CheckExistenceAtSubscriptionScopeResponder handles the response to the CheckExistenceAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) CheckExistenceAtSubscriptionScopeResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent, http.StatusNotFound),
		autorest.ByClosing())
	result.Response = resp
	return
}

// CreateOrUpdate you can provide the template and parameters directly in the request or link to JSON files.
// Parameters:
// resourceGroupName - the name of the resource group to deploy the resources to. The name is case insensitive.
// The resource group must already exist.
// deploymentName - the name of the deployment.
// parameters - additional parameters supplied to the operation.
func (client DeploymentsClient) CreateOrUpdate(ctx context.Context, resourceGroupName string, deploymentName string, parameters Deployment) (result DeploymentsCreateOrUpdateFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Properties", Name: validation.Null, Rule: true,
				Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
					{Target: "parameters.Properties.ParametersLink", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.Properties.ParametersLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
				}}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "CreateOrUpdate", err.Error())
	}

	req, err := client.CreateOrUpdatePreparer(ctx, resourceGroupName, deploymentName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CreateOrUpdate", nil, "Failure preparing request")
		return
	}

	result, err = client.CreateOrUpdateSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CreateOrUpdate", result.Response(), "Failure sending request")
		return
	}

	return
}

// CreateOrUpdatePreparer prepares the CreateOrUpdate request.
func (client DeploymentsClient) CreateOrUpdatePreparer(ctx context.Context, resourceGroupName string, deploymentName string, parameters Deployment) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName":    autorest.Encode("path", deploymentName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateOrUpdateSender sends the CreateOrUpdate request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) CreateOrUpdateSender(req *http.Request) (future DeploymentsCreateOrUpdateFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// CreateOrUpdateResponder handles the response to the CreateOrUpdate request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) CreateOrUpdateResponder(resp *http.Response) (result DeploymentExtended, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// CreateOrUpdateAtSubscriptionScope you can provide the template and parameters directly in the request or link to
// JSON files.
// Parameters:
// deploymentName - the name of the deployment.
// parameters - additional parameters supplied to the operation.
func (client DeploymentsClient) CreateOrUpdateAtSubscriptionScope(ctx context.Context, deploymentName string, parameters Deployment) (result DeploymentsCreateOrUpdateAtSubscriptionScopeFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Properties", Name: validation.Null, Rule: true,
				Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
					{Target: "parameters.Properties.ParametersLink", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.Properties.ParametersLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
				}}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "CreateOrUpdateAtSubscriptionScope", err.Error())
	}

	req, err := client.CreateOrUpdateAtSubscriptionScopePreparer(ctx, deploymentName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CreateOrUpdateAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	result, err = client.CreateOrUpdateAtSubscriptionScopeSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "CreateOrUpdateAtSubscriptionScope", result.Response(), "Failure sending request")
		return
	}

	return
}

// CreateOrUpdateAtSubscriptionScopePreparer prepares the CreateOrUpdateAtSubscriptionScope request.
func (client DeploymentsClient) CreateOrUpdateAtSubscriptionScopePreparer(ctx context.Context, deploymentName string, parameters Deployment) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName": autorest.Encode("path", deploymentName),
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateOrUpdateAtSubscriptionScopeSender sends the CreateOrUpdateAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) CreateOrUpdateAtSubscriptionScopeSender(req *http.Request) (future DeploymentsCreateOrUpdateAtSubscriptionScopeFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// CreateOrUpdateAtSubscriptionScopeResponder handles the response to the CreateOrUpdateAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) CreateOrUpdateAtSubscriptionScopeResponder(resp *http.Response) (result DeploymentExtended, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Delete a template deployment that is currently running cannot be deleted. Deleting a template deployment removes the
// associated deployment operations. Deleting a template deployment does not affect the state of the resource group.
// This is an asynchronous operation that returns a status of 202 until the template deployment is successfully
// deleted. The Location response header contains the URI that is used to obtain the status of the process. While the
// process is running, a call to the URI in the Location header returns a status of 202. When the process finishes, the
// URI in the Location header returns a status of 204 on success. If the asynchronous request failed, the URI in the
// Location header returns an error-level status code.
// Parameters:
// resourceGroupName - the name of the resource group with the deployment to delete. The name is case
// insensitive.
// deploymentName - the name of the deployment to delete.
func (client DeploymentsClient) Delete(ctx context.Context, resourceGroupName string, deploymentName string) (result DeploymentsDeleteFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "Delete", err.Error())
	}

	req, err := client.DeletePreparer(ctx, resourceGroupName, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Delete", nil, "Failure preparing request")
		return
	}

	result, err = client.DeleteSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Delete", result.Response(), "Failure sending request")
		return
	}

	return
}

// DeletePreparer prepares the Delete request.
func (client DeploymentsClient) DeletePreparer(ctx context.Context, resourceGroupName string, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName":    autorest.Encode("path", deploymentName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) DeleteSender(req *http.Request) (future DeploymentsDeleteFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// DeleteAtSubscriptionScope a template deployment that is currently running cannot be deleted. Deleting a template
// deployment removes the associated deployment operations. This is an asynchronous operation that returns a status of
// 202 until the template deployment is successfully deleted. The Location response header contains the URI that is
// used to obtain the status of the process. While the process is running, a call to the URI in the Location header
// returns a status of 202. When the process finishes, the URI in the Location header returns a status of 204 on
// success. If the asynchronous request failed, the URI in the Location header returns an error-level status code.
// Parameters:
// deploymentName - the name of the deployment to delete.
func (client DeploymentsClient) DeleteAtSubscriptionScope(ctx context.Context, deploymentName string) (result DeploymentsDeleteAtSubscriptionScopeFuture, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "DeleteAtSubscriptionScope", err.Error())
	}

	req, err := client.DeleteAtSubscriptionScopePreparer(ctx, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "DeleteAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	result, err = client.DeleteAtSubscriptionScopeSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "DeleteAtSubscriptionScope", result.Response(), "Failure sending request")
		return
	}

	return
}

// DeleteAtSubscriptionScopePreparer prepares the DeleteAtSubscriptionScope request.
func (client DeploymentsClient) DeleteAtSubscriptionScopePreparer(ctx context.Context, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName": autorest.Encode("path", deploymentName),
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteAtSubscriptionScopeSender sends the DeleteAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) DeleteAtSubscriptionScopeSender(req *http.Request) (future DeploymentsDeleteAtSubscriptionScopeFuture, err error) {
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	err = autorest.Respond(resp, azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// DeleteAtSubscriptionScopeResponder handles the response to the DeleteAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) DeleteAtSubscriptionScopeResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// ExportTemplate exports the template used for specified deployment.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// deploymentName - the name of the deployment from which to get the template.
func (client DeploymentsClient) ExportTemplate(ctx context.Context, resourceGroupName string, deploymentName string) (result DeploymentExportResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "ExportTemplate", err.Error())
	}

	req, err := client.ExportTemplatePreparer(ctx, resourceGroupName, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ExportTemplate", nil, "Failure preparing request")
		return
	}

	resp, err := client.ExportTemplateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ExportTemplate", resp, "Failure sending request")
		return
	}

	result, err = client.ExportTemplateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ExportTemplate", resp, "Failure responding to request")
	}

	return
}

// ExportTemplatePreparer prepares the ExportTemplate request.
func (client DeploymentsClient) ExportTemplatePreparer(ctx context.Context, resourceGroupName string, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName":    autorest.Encode("path", deploymentName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/{deploymentName}/exportTemplate", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ExportTemplateSender sends the ExportTemplate request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) ExportTemplateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ExportTemplateResponder handles the response to the ExportTemplate request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) ExportTemplateResponder(resp *http.Response) (result DeploymentExportResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ExportTemplateAtSubscriptionScope exports the template used for specified deployment.
// Parameters:
// deploymentName - the name of the deployment from which to get the template.
func (client DeploymentsClient) ExportTemplateAtSubscriptionScope(ctx context.Context, deploymentName string) (result DeploymentExportResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "ExportTemplateAtSubscriptionScope", err.Error())
	}

	req, err := client.ExportTemplateAtSubscriptionScopePreparer(ctx, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ExportTemplateAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	resp, err := client.ExportTemplateAtSubscriptionScopeSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ExportTemplateAtSubscriptionScope", resp, "Failure sending request")
		return
	}

	result, err = client.ExportTemplateAtSubscriptionScopeResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ExportTemplateAtSubscriptionScope", resp, "Failure responding to request")
	}

	return
}

// ExportTemplateAtSubscriptionScopePreparer prepares the ExportTemplateAtSubscriptionScope request.
func (client DeploymentsClient) ExportTemplateAtSubscriptionScopePreparer(ctx context.Context, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName": autorest.Encode("path", deploymentName),
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/{deploymentName}/exportTemplate", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ExportTemplateAtSubscriptionScopeSender sends the ExportTemplateAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) ExportTemplateAtSubscriptionScopeSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ExportTemplateAtSubscriptionScopeResponder handles the response to the ExportTemplateAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) ExportTemplateAtSubscriptionScopeResponder(resp *http.Response) (result DeploymentExportResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Get gets a deployment.
// Parameters:
// resourceGroupName - the name of the resource group. The name is case insensitive.
// deploymentName - the name of the deployment to get.
func (client DeploymentsClient) Get(ctx context.Context, resourceGroupName string, deploymentName string) (result DeploymentExtended, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "Get", err.Error())
	}

	req, err := client.GetPreparer(ctx, resourceGroupName, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Get", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Get", resp, "Failure sending request")
		return
	}

	result, err = client.GetResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Get", resp, "Failure responding to request")
	}

	return
}

// GetPreparer prepares the Get request.
func (client DeploymentsClient) GetPreparer(ctx context.Context, resourceGroupName string, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName":    autorest.Encode("path", deploymentName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSender sends the Get request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) GetSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// GetResponder handles the response to the Get request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) GetResponder(resp *http.Response) (result DeploymentExtended, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetAtSubscriptionScope gets a deployment.
// Parameters:
// deploymentName - the name of the deployment to get.
func (client DeploymentsClient) GetAtSubscriptionScope(ctx context.Context, deploymentName string) (result DeploymentExtended, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "GetAtSubscriptionScope", err.Error())
	}

	req, err := client.GetAtSubscriptionScopePreparer(ctx, deploymentName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "GetAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetAtSubscriptionScopeSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "GetAtSubscriptionScope", resp, "Failure sending request")
		return
	}

	result, err = client.GetAtSubscriptionScopeResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "GetAtSubscriptionScope", resp, "Failure responding to request")
	}

	return
}

// GetAtSubscriptionScopePreparer prepares the GetAtSubscriptionScope request.
func (client DeploymentsClient) GetAtSubscriptionScopePreparer(ctx context.Context, deploymentName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName": autorest.Encode("path", deploymentName),
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/{deploymentName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetAtSubscriptionScopeSender sends the GetAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) GetAtSubscriptionScopeSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// GetAtSubscriptionScopeResponder handles the response to the GetAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) GetAtSubscriptionScopeResponder(resp *http.Response) (result DeploymentExtended, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListAtSubscriptionScope get all the deployments for a subscription.
// Parameters:
// filter - the filter to apply on the operation. For example, you can use $filter=provisioningState eq
// '{state}'.
// top - the number of results to get. If null is passed, returns all deployments.
func (client DeploymentsClient) ListAtSubscriptionScope(ctx context.Context, filter string, top *int32) (result DeploymentListResultPage, err error) {
	result.fn = client.listAtSubscriptionScopeNextResults
	req, err := client.ListAtSubscriptionScopePreparer(ctx, filter, top)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ListAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListAtSubscriptionScopeSender(req)
	if err != nil {
		result.dlr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ListAtSubscriptionScope", resp, "Failure sending request")
		return
	}

	result.dlr, err = client.ListAtSubscriptionScopeResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ListAtSubscriptionScope", resp, "Failure responding to request")
	}

	return
}

// ListAtSubscriptionScopePreparer prepares the ListAtSubscriptionScope request.
func (client DeploymentsClient) ListAtSubscriptionScopePreparer(ctx context.Context, filter string, top *int32) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if len(filter) > 0 {
		queryParameters["$filter"] = autorest.Encode("query", filter)
	}
	if top != nil {
		queryParameters["$top"] = autorest.Encode("query", *top)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListAtSubscriptionScopeSender sends the ListAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) ListAtSubscriptionScopeSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ListAtSubscriptionScopeResponder handles the response to the ListAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) ListAtSubscriptionScopeResponder(resp *http.Response) (result DeploymentListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listAtSubscriptionScopeNextResults retrieves the next set of results, if any.
func (client DeploymentsClient) listAtSubscriptionScopeNextResults(lastResults DeploymentListResult) (result DeploymentListResult, err error) {
	req, err := lastResults.deploymentListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "resources.DeploymentsClient", "listAtSubscriptionScopeNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListAtSubscriptionScopeSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "resources.DeploymentsClient", "listAtSubscriptionScopeNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListAtSubscriptionScopeResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "listAtSubscriptionScopeNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListAtSubscriptionScopeComplete enumerates all values, automatically crossing page boundaries as required.
func (client DeploymentsClient) ListAtSubscriptionScopeComplete(ctx context.Context, filter string, top *int32) (result DeploymentListResultIterator, err error) {
	result.page, err = client.ListAtSubscriptionScope(ctx, filter, top)
	return
}

// ListByResourceGroup get all the deployments for a resource group.
// Parameters:
// resourceGroupName - the name of the resource group with the deployments to get. The name is case
// insensitive.
// filter - the filter to apply on the operation. For example, you can use $filter=provisioningState eq
// '{state}'.
// top - the number of results to get. If null is passed, returns all deployments.
func (client DeploymentsClient) ListByResourceGroup(ctx context.Context, resourceGroupName string, filter string, top *int32) (result DeploymentListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "ListByResourceGroup", err.Error())
	}

	result.fn = client.listByResourceGroupNextResults
	req, err := client.ListByResourceGroupPreparer(ctx, resourceGroupName, filter, top)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ListByResourceGroup", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.dlr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ListByResourceGroup", resp, "Failure sending request")
		return
	}

	result.dlr, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ListByResourceGroup", resp, "Failure responding to request")
	}

	return
}

// ListByResourceGroupPreparer prepares the ListByResourceGroup request.
func (client DeploymentsClient) ListByResourceGroupPreparer(ctx context.Context, resourceGroupName string, filter string, top *int32) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if len(filter) > 0 {
		queryParameters["$filter"] = autorest.Encode("query", filter)
	}
	if top != nil {
		queryParameters["$top"] = autorest.Encode("query", *top)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListByResourceGroupSender sends the ListByResourceGroup request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) ListByResourceGroupSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ListByResourceGroupResponder handles the response to the ListByResourceGroup request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) ListByResourceGroupResponder(resp *http.Response) (result DeploymentListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listByResourceGroupNextResults retrieves the next set of results, if any.
func (client DeploymentsClient) listByResourceGroupNextResults(lastResults DeploymentListResult) (result DeploymentListResult, err error) {
	req, err := lastResults.deploymentListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "resources.DeploymentsClient", "listByResourceGroupNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "resources.DeploymentsClient", "listByResourceGroupNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "listByResourceGroupNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListByResourceGroupComplete enumerates all values, automatically crossing page boundaries as required.
func (client DeploymentsClient) ListByResourceGroupComplete(ctx context.Context, resourceGroupName string, filter string, top *int32) (result DeploymentListResultIterator, err error) {
	result.page, err = client.ListByResourceGroup(ctx, resourceGroupName, filter, top)
	return
}

// Validate validates whether the specified template is syntactically correct and will be accepted by Azure Resource
// Manager..
// Parameters:
// resourceGroupName - the name of the resource group the template will be deployed to. The name is case
// insensitive.
// deploymentName - the name of the deployment.
// parameters - parameters to validate.
func (client DeploymentsClient) Validate(ctx context.Context, resourceGroupName string, deploymentName string, parameters Deployment) (result DeploymentValidateResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Properties", Name: validation.Null, Rule: true,
				Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
					{Target: "parameters.Properties.ParametersLink", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.Properties.ParametersLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
				}}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "Validate", err.Error())
	}

	req, err := client.ValidatePreparer(ctx, resourceGroupName, deploymentName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Validate", nil, "Failure preparing request")
		return
	}

	resp, err := client.ValidateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Validate", resp, "Failure sending request")
		return
	}

	result, err = client.ValidateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "Validate", resp, "Failure responding to request")
	}

	return
}

// ValidatePreparer prepares the Validate request.
func (client DeploymentsClient) ValidatePreparer(ctx context.Context, resourceGroupName string, deploymentName string, parameters Deployment) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName":    autorest.Encode("path", deploymentName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourcegroups/{resourceGroupName}/providers/Microsoft.Resources/deployments/{deploymentName}/validate", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ValidateSender sends the Validate request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) ValidateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ValidateResponder handles the response to the Validate request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) ValidateResponder(resp *http.Response) (result DeploymentValidateResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusBadRequest),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ValidateAtSubscriptionScope validates whether the specified template is syntactically correct and will be accepted
// by Azure Resource Manager..
// Parameters:
// deploymentName - the name of the deployment.
// parameters - parameters to validate.
func (client DeploymentsClient) ValidateAtSubscriptionScope(ctx context.Context, deploymentName string, parameters Deployment) (result DeploymentValidateResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: deploymentName,
			Constraints: []validation.Constraint{{Target: "deploymentName", Name: validation.MaxLength, Rule: 64, Chain: nil},
				{Target: "deploymentName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "deploymentName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Properties", Name: validation.Null, Rule: true,
				Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.Properties.TemplateLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
					{Target: "parameters.Properties.ParametersLink", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.Properties.ParametersLink.URI", Name: validation.Null, Rule: true, Chain: nil}}},
				}}}}}); err != nil {
		return result, validation.NewError("resources.DeploymentsClient", "ValidateAtSubscriptionScope", err.Error())
	}

	req, err := client.ValidateAtSubscriptionScopePreparer(ctx, deploymentName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ValidateAtSubscriptionScope", nil, "Failure preparing request")
		return
	}

	resp, err := client.ValidateAtSubscriptionScopeSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ValidateAtSubscriptionScope", resp, "Failure sending request")
		return
	}

	result, err = client.ValidateAtSubscriptionScopeResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "resources.DeploymentsClient", "ValidateAtSubscriptionScope", resp, "Failure responding to request")
	}

	return
}

// ValidateAtSubscriptionScopePreparer prepares the ValidateAtSubscriptionScope request.
func (client DeploymentsClient) ValidateAtSubscriptionScopePreparer(ctx context.Context, deploymentName string, parameters Deployment) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"deploymentName": autorest.Encode("path", deploymentName),
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2018-05-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Resources/deployments/{deploymentName}/validate", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ValidateAtSubscriptionScopeSender sends the ValidateAtSubscriptionScope request. The method will close the
// http.Response Body if it receives an error.
func (client DeploymentsClient) ValidateAtSubscriptionScopeSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		azure.DoRetryWithRegistration(client.Client))
}

// ValidateAtSubscriptionScopeResponder handles the response to the ValidateAtSubscriptionScope request. The method always
// closes the http.Response Body.
func (client DeploymentsClient) ValidateAtSubscriptionScopeResponder(resp *http.Response) (result DeploymentValidateResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusBadRequest),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}