Eurotronic Technology

This app adds support for Eurotronic Technology Z-Wave devices in Homey.

Supported Devices:

• Stella Z-Wave
• Comet Z-Wave
• Spirit Z-Wave

Device Functions Stella/Comet:

• Read target temperature (not the manual set temperature)
• Read last measured temperature (not trigger-able)
• On every Wake-Up:
  • Read measured temperature (trigger-able)
  • Set target temperature
  • Read/Set modes (Off, Comfortable, Economic, Manual)
  • Set economy target temperature (Setting/flow)
• Set manual valve position (flow only)

Device Functions Spirit:

• Read/Set target temperature
• Read/Set measured (room) temperature (set = flow and/or direct association only)
• Read/Set modes (Off, Comfortable, Economic, Boost, Manual)
• Set economy target temperature (setting/flow)
• Read/Set (child) protection
• Set manual valve position (flow only)
• Error occurred (flow only)

Notes

Stella/Comet: The temperature and mode(s) will only be SET when the device Wakes Up. Wake-Up is by default set to 1 hour (3600 seconds) on homey.
If you want to change the Wake-Up Interval, make sure you use Steps of 240 seconds.

Supported Languages:

• English
• Dutch (Nederlands)

Change Log:

v2.1.0:

• Add battery types for Homey v3's Energy

v2.0.7:

• [Spirit] Fix device's measured temperature overwriting the external temperature sensor (when used).
• Update meshdriver to v1.3.3

v2.0.6:

• [Comet] Fix crash

v2.0.5:

• [Stella] Fix crash
• [Spirit] (Re)set measured temperature on change of external temperature setting
• Add insights for manual value

v2.0.4:

• Fix the wrong device (last included) being the device always controlled from flows

v2.0.3:

• [Spirit] Fix not being able to send the room temperature
• Added a setting for the Economic temperature

v2.0.2:

• Fix rounding errors manual control
• Rewritten internal functions making the app more stable (in particular with multiple devices)
• Fixed $deg;C special character which didn't work, to normal °C

v2.0.1:

• [Spirit] Fix external temperature setting not set-able
• Fix set eco temperature flow card
• Update Meshdriver to v1.2.30
• Fix whitespacing

v2.0.0:

• Rewrite to SDKv2
• Update Meshdriver to v1.2.28

v1.2.1:

• [Spirit] Fix default temperature reporting, normal default is too high.
• [Spirit]: Fix a few text errors.
• [Spirit]: Added id's for (future) firmware updates of the spirit.

v1.2.0:

• Add support Spirit Z-Wave
• Fixed temperature ranges of Stella and Comet thermostatic
• Fixed "manual position" value not being inserted in the global token
• Update Z-Wave driver to 1.1.9

v1.1.3:

• Fix set economic temperature bug.

v1.1.1 & 1.1.2:

• Minor fixes

v1.1.0:

• Add support for manual position control (re-pair needed for full support)
• Update Z-Wave driver to 1.1.8
• A lot of code improvements

v1.0.0:

• Added support Stella Z-Wave
• [Comet] Update mode support
• [Comet] Updated Read me
• [Comet] Changed error logging