Adjust your external monitors' built-in controls from the OSX shell:
- brightness
- contrast
And possibly (if your monitor firmware is well implemented):
- input source
- built-in speaker volume
- on/off/standby
- rgb colors
- color presets
- reset
make installFor an On-Screen Display using OSDisplay.app:
make CCFLAGS=-DOSD clean ddcctl
Run ddcctl -h for some options.
ddcctl.sh is a script I use to control two PC monitors plugged into my Mac Mini.
You can point Alfred, ControlPlane, or Karabiner at it to quickly switch presets.
When setting input source, refer to the table below to determine which value to use. For example, to set your first display to HDMI: ddcctl -d 1 -i 17
| Input Source | Value |
|---|---|
| VGA-1 | 1 |
| VGA-2 | 2 |
| DVI-1 | 3 |
| DVI-2 | 4 |
| Composite video 1 | 5 |
| Composite video 2 | 6 |
| S-Video-1 | 7 |
| S-Video-2 | 8 |
| Tuner-1 | 9 |
| Tuner-2 | 10 |
| Tuner-3 | 11 |
| Component video (YPrPb/YCrCb) 1 | 12 |
| Component video (YPrPb/YCrCb) 2 | 13 |
| Component video (YPrPb/YCrCb) 3 | 14 |
| DisplayPort-1 | 15 |
| DisplayPort-2 | 16 |
| HDMI-1 | 17 |
| HDMI-2 | 18 |