forked from u-boot/u-boot
-
Notifications
You must be signed in to change notification settings - Fork 2
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
FROMGIT: boards: amlogic: update documentation for Beelink GT-King/Pro
Update the device matrix and add build instructions. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
- Loading branch information
Showing
3 changed files
with
293 additions
and
60 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,115 @@ | ||
.. SPDX-License-Identifier: GPL-2.0+ | ||
U-Boot for Beelink GT-King | ||
========================== | ||
|
||
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference | ||
board with an S922X-H chip. | ||
|
||
- 4GB LPDDR4 RAM | ||
- 64GB eMMC storage | ||
- 10/100/1000 Base-T Ethernet | ||
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) | ||
- HDMI 2.1 video | ||
- S/PDIF optical output | ||
- Analogue audio output | ||
- 1x USB 2.0 port | ||
- 2x USB 3.0 ports | ||
- IR receiver | ||
- 1x micro SD card slot | ||
|
||
Beelink do not provide public schematics, but have been willing | ||
to share them with known distro developers on request. | ||
|
||
U-Boot compilation | ||
------------------ | ||
|
||
.. code-block:: bash | ||
$ export CROSS_COMPILE=aarch64-none-elf- | ||
$ make beelink-gtking_defconfig | ||
$ make | ||
Image creation | ||
-------------- | ||
|
||
Amlogic does not provide sources for the firmware and for tools needed | ||
to create the bootloader image. Beelink have provided the Amlogic "SDK" | ||
in their forums, but the u-boot sources included result in 2GB RAM being | ||
detected. The following FIPs were generated with newer private sources | ||
and give correct (4GB) RAM detection: | ||
|
||
https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x | ||
|
||
NB: Beelink use a common board config for GT-King, GT-King Pro and the | ||
GS-King-X model, hence the "beelink-s922x" name. | ||
|
||
.. code-block:: bash | ||
$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip | ||
$ unzip master.zip | ||
$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x | ||
Go back to the mainline U-Boot source tree then: | ||
|
||
.. code-block:: bash | ||
$ mkdir fip | ||
$ cp $FIPDIR/* fip/ | ||
$ cp u-boot.bin fip/bl33.bin | ||
$ sh fip/blx_fix.sh \ | ||
fip/bl30.bin \ | ||
fip/zero_tmp \ | ||
fip/bl30_zero.bin \ | ||
fip/bl301.bin \ | ||
fip/bl301_zero.bin \ | ||
fip/bl30_new.bin \ | ||
bl30 | ||
$ sh fip/blx_fix.sh \ | ||
fip/bl2.bin \ | ||
fip/zero_tmp \ | ||
fip/bl2_zero.bin \ | ||
fip/acs.bin \ | ||
fip/bl21_zero.bin \ | ||
fip/bl2_new.bin \ | ||
bl2 | ||
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ | ||
--output fip/bl30_new.bin.g12a.enc \ | ||
--level v3 | ||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ | ||
--output fip/bl30_new.bin.enc \ | ||
--level v3 --type bl30 | ||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ | ||
--output fip/bl31.img.enc \ | ||
--level v3 --type bl31 | ||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ | ||
--output fip/bl33.bin.enc \ | ||
--level v3 --type bl33 | ||
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ | ||
--output fip/bl2.n.bin.sig | ||
$ fip/aml_encrypt_g12b --bootmk \ | ||
--output fip/u-boot.bin \ | ||
--bl2 fip/bl2.n.bin.sig \ | ||
--bl30 fip/bl30_new.bin.enc \ | ||
--bl31 fip/bl31.img.enc \ | ||
--bl33 fip/bl33.bin.enc \ | ||
--ddrfw1 fip/ddr4_1d.fw \ | ||
--ddrfw2 fip/ddr4_2d.fw \ | ||
--ddrfw3 fip/ddr3_1d.fw \ | ||
--ddrfw4 fip/piei.fw \ | ||
--ddrfw5 fip/lpddr4_1d.fw \ | ||
--ddrfw6 fip/lpddr4_2d.fw \ | ||
--ddrfw7 fip/diag_lpddr4.fw \ | ||
--ddrfw8 fip/aml_ddr.fw \ | ||
--level v3 | ||
and then write the image to SD with: | ||
|
||
.. code-block:: bash | ||
$ DEV=/dev/your_sd_device | ||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 | ||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,116 @@ | ||
.. SPDX-License-Identifier: GPL-2.0+ | ||
U-Boot for Beelink GT-King Pro | ||
============================== | ||
|
||
The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference | ||
board with an S922X-H chip. | ||
|
||
- 4GB LPDDR4 RAM | ||
- 64GB eMMC storage | ||
- 10/100/1000 Base-T Ethernet | ||
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) | ||
- HDMI 2.1 video | ||
- Analogue audio output | ||
- 1x RS232 port | ||
- 2x USB 2.0 port | ||
- 2x USB 3.0 ports | ||
- IR receiver | ||
- 1x SD card slot | ||
- 1x Power on/off button | ||
|
||
Beelink do not provide public schematics, but have been willing | ||
to share them with known distro developers on request. | ||
|
||
U-Boot compilation | ||
------------------ | ||
|
||
.. code-block:: bash | ||
$ export CROSS_COMPILE=aarch64-none-elf- | ||
$ make beelink-gtkingpro_defconfig | ||
$ make | ||
Image creation | ||
-------------- | ||
|
||
Amlogic does not provide sources for the firmware and for tools needed | ||
to create the bootloader image. Beelink have provided the Amlogic "SDK" | ||
in their forums, but the u-boot sources included result in 2GB RAM being | ||
detected. The following FIPs were generated with newer private sources | ||
and give correct (4GB) RAM detection: | ||
|
||
https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x | ||
|
||
NB: Beelink use a common board config for GT-King, GT-King Pro and the | ||
GS-King-X model, hence the "beelink-s922x" name. | ||
|
||
.. code-block:: bash | ||
$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip | ||
$ unzip master.zip | ||
$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x | ||
Go back to the mainline U-Boot source tree then: | ||
|
||
.. code-block:: bash | ||
$ mkdir fip | ||
$ cp $FIPDIR/* fip/ | ||
$ cp u-boot.bin fip/bl33.bin | ||
$ sh fip/blx_fix.sh \ | ||
fip/bl30.bin \ | ||
fip/zero_tmp \ | ||
fip/bl30_zero.bin \ | ||
fip/bl301.bin \ | ||
fip/bl301_zero.bin \ | ||
fip/bl30_new.bin \ | ||
bl30 | ||
$ sh fip/blx_fix.sh \ | ||
fip/bl2.bin \ | ||
fip/zero_tmp \ | ||
fip/bl2_zero.bin \ | ||
fip/acs.bin \ | ||
fip/bl21_zero.bin \ | ||
fip/bl2_new.bin \ | ||
bl2 | ||
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ | ||
--output fip/bl30_new.bin.g12a.enc \ | ||
--level v3 | ||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ | ||
--output fip/bl30_new.bin.enc \ | ||
--level v3 --type bl30 | ||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ | ||
--output fip/bl31.img.enc \ | ||
--level v3 --type bl31 | ||
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ | ||
--output fip/bl33.bin.enc \ | ||
--level v3 --type bl33 | ||
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ | ||
--output fip/bl2.n.bin.sig | ||
$ fip/aml_encrypt_g12b --bootmk \ | ||
--output fip/u-boot.bin \ | ||
--bl2 fip/bl2.n.bin.sig \ | ||
--bl30 fip/bl30_new.bin.enc \ | ||
--bl31 fip/bl31.img.enc \ | ||
--bl33 fip/bl33.bin.enc \ | ||
--ddrfw1 fip/ddr4_1d.fw \ | ||
--ddrfw2 fip/ddr4_2d.fw \ | ||
--ddrfw3 fip/ddr3_1d.fw \ | ||
--ddrfw4 fip/piei.fw \ | ||
--ddrfw5 fip/lpddr4_1d.fw \ | ||
--ddrfw6 fip/lpddr4_2d.fw \ | ||
--ddrfw7 fip/diag_lpddr4.fw \ | ||
--ddrfw8 fip/aml_ddr.fw \ | ||
--level v3 | ||
and then write the image to SD with: | ||
|
||
.. code-block:: bash | ||
$ DEV=/dev/your_sd_device | ||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 | ||
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |
Oops, something went wrong.