Skip to content

This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.

Notifications You must be signed in to change notification settings

chilipeppr/robot-actuator-esp32-v8

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

robot-actuator-esp32-v8

This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.

This repository contains the latest design for the small actuator including:

  • PCB schematic and board file (Eagle)
  • Bill of Materials
  • Fusion 360 files
  • STL files for 3D printing
  • NodeMCU ESP32 for Lua firmware with touch module, pulse counter module, RMT TX module, and gpiomatrix module.
  • Lua code for actuator
  • Link to ChiliPeppr http://chilipeppr.com/arm workspace to control the actuator and to ChiliPeppr ESP32 for Lua workspace for uploading code to the ESP32 device http://chilipeppr.com/esp32
  • Heat management test results
  • Youtube videos

This actuator is based on the amazing design of Jeff Kerr's (LoboCNC on Thingiverse) 3D printed robot arm WE-R2.4 six axis robot arm. https://www.thingiverse.com/thing:3327968

alt text

alt text

alt text

Eagle Files

The main PCB board in Eagle. alt text

Top alt text

Bottom alt text

The touch PCB board in Eagle. alt text

Ordering PCBs

When ordering PCBs, keep in mind the thickness of the main PCB is 1.0 mm while the touch PCB is 1.2 mm. A white soldermask is recommended, but not important.

Main PCB is 1.0 mm thickness alt text

Touch PCB is 1.2 mm thickness alt text

Fusion 360

The CAD files in Fusion360. alt text

ChiliPeppr

ChiliPeppr Robot Arm Workspace (Work in progress) http://chilipeppr.com/arm

alt text

ChiliPeppr ESP32 for Lua Workspace for editing/uploading code http://chilipeppr.com/esp32

alt text

Heat Test

alt text

Youtube Videos

Part 1 https://www.youtube.com/watch?v=tEbJV32GyYU

alt text

Part 2 https://www.youtube.com/watch?v=RdmdFIhCo4M

alt text

Part 3 https://youtu.be/4o3d7_WZ_DQ

alt text

Bill of Materials

Ref Part Price Quantity Ext Price URL Notes
PCB $-
ESP32 Wemos Mini $4.05 1 $4.05 https://www.aliexpress.com/item/32839344778.html
2x10 Pin Header Female for ESP32 $0.12 2 $0.24 https://lcsc.com/product-detail/Pin-Header-Female-Header_Boom-Precision-Elec-2-54mm-2-10-Straight-Female-header_C30867.html Solder to the ESP32 board
C1 2x10 Pin Header Male for ESP32 $0.10 1 $0.10 https://lcsc.com/product-detail/Pin-Header-Female-Header_Shenzhen-Cankemeng-Headers-Pins-2-10P-2-54mm-Straight-line_C124359.html Solder to main PCB
DRV8825 $0.88 1 $0.88 https://www.aliexpress.com/item/33010878323.html The most popular stepper driver out there. Simple and easy.
100uF 50V Capacitor for DRV8825 $0.13 1 $0.13 https://lcsc.com/product-detail/Aluminum-Electrolytic-Capacitors-Leaded_PANASONIC-EEUFM1H101_C128473.html The big capacitor for stepper motor driver
DC to DC 24V to 5V Converter $0.48 1 $0.48 https://www.aliexpress.com/item/32796268715.html Little board from Aliexpress to get us to 5V on the cheap
Fan 25mm 12V $1.08 1 $1.08 https://www.aliexpress.com/item/33026177502.html Silent fan that we overdrive to 20v for brief periods if heat spikes, otherwise we leave it off
R3 Fan Mosfet FDV301N 25V 220mA SOT-23 $0.04 1 $0.04 https://lcsc.com/product-detail/MOSFET_ON-Semicon_FDV301N_ON-Semicon-ON-FDV301N_C15310.html Allows PWM speed control of fan. Run around 20Hz.
R4 Fan Diode Protector 100V 300mA SOD-123 $0.02 1 $0.02 https://lcsc.com/product-detail/Switching-Diode_DIODES_1N4148W-7-F_1N4148W-7-F_C83528.html When fan switches off from Mosfet, it generates back current, so this diode lets it loop back into the fan to get absorbed
Fan 100Ohm gate resistor 0402 $0.01 1 $0.01 https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_100R-100R-1_C106232.html Absorbs feedback attenuation
Fan 1MOhm pull-down resistor 0402 $0.01 1 $0.01 https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_1MR-105-5_C144054.html Pulldown resistor to ground to shut off mosfet
JST XH Male Connector for fan $0.04 1 $0.04 https://lcsc.com/product-detail/Wire-To-Board-Wire-To-Wire-Connector_JST-Sales-America_B2B-XH-A-LF-SN_JST-Sales-America-B2B-XH-A-LF-SN_C158012.html
JST XH Crimp Connector for fan wire $0.01 2 $0.02 https://lcsc.com/product-detail/New-Arrivals_JST-Sales-America-SXH-001T-P0-6N_C385122.html In case you have to reterminate the fan wire, get these crimp connectors. You need a crimp tool.
JST XH Female Connector for fan wire $0.02 1 $0.02 https://lcsc.com/product-detail/Rectangular-Connectors-Housings_JST-Sales-America_XHP-2_JST-Sales-America-XHP-2_C144401.html In case you have to reterminate the fan wire, get this female housing to slide the crimp connectors into
WS2812B White $0.15 1 $0.15 https://www.aliexpress.com/item/32960205936.html Break off one LED and solder to side of PCB at 90 degree angle. Connect center pin to DIN, not DOUT.
Red LED 0805 $0.02 3 $0.06 https://lcsc.com/product-detail/Light-Emitting-Diodes-LED_0805-Red-LED-Iv-61mcd-Typ-atIF-20mA_C72037.html Indicator LEDs
R5, R2 1KOhm current limit resistor for LED 0402 $0.01 2 $0.02 https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_1KR-1001-1_C106235.html The LEDs on the 3.3v bus for step and fan indicator use 1K to give LED about 1ma of current so it lights up very dim, but enough to indicate status.
R6 2KOhm current limit resistor for power LED 0402 $0.01 1 $0.01 https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_Uniroyal-Elec-0402WGF2001TCE_C4109.html The power LED is on a 5v bus. 2K gives it about 1.5ma of current for a dim indicator.
8 Pin Female Header 2.54mm $0.14 2 $0.28 https://lcsc.com/product-detail/Pin-Header-Female-Header_Changjiang-Connectors-A2541HWV-8P_C225505.html 2 needed for DRV8825 connection to main PCB.
4 Pin Female Header 2.54mm $0.07 3 $0.22 https://lcsc.com/product-detail/Pin-Header-Female-Header_Shenzhen-Cankemeng-Female-header-1-4P-2-54mm-Straight-line_C124413.html 1 for DC to DC, 2 for touch sensor PCB connection
3 Pin Female Header 2.54mm $0.06 2 $0.11 https://lcsc.com/product-detail/Pin-Header-Female-Header_Shenzhen-Cankemeng-22025403P00CKMT_C146690.html One for Hall sensor, one for TMP36.
2 Pin Female Header 2.54mm $0.03 4 $0.10 https://lcsc.com/product-detail/Pin-Header-Female-Header_Boom-Precision-Elec-2-54-1-2PFemale_C49661.html 2 for incoming 20v from slip ring. 2 for outgoing 20v to slip ring.
JST PH B4B-K-S Male Header for Stepper $0.17 1 $0.17 https://lcsc.com/product-detail/Wire-To-Board-Wire-To-Wire-Connector_JST-Sales-America_B4B-PH-K-LF-SN_JST-Sales-America-B4B-PH-K-LF-SN_C265289.html Socket soldered to PCB
JST PHR-4 Female Header for Stepper Cable $0.02 1 $0.02 https://lcsc.com/product-detail/Connectors_JST_PHR-4_PHR-4-4P-pitch2-0mm-Plastic-shell_C111514.html End of wire crimped connector
C2 JST SPH Crimp Connector $0.01 4 $0.03 https://lcsc.com/product-detail/Rectangular-Connectors-Contacts_JST_SPH-002T-P0-5S_SPH-002T-P0-5S-PH-T-PH-2-0_C111515.html Individual crimp connectors. You'll need a crimping tool.
Toggle Switch $0.12 1 $0.12 https://lcsc.com/product-detail/Toggle-Switches_Korean-Hroparts-Elec-K3-1260D-L1_C92657.html Toggle on/off the 20v to all components
Pin Male Header Right Angle 2.54mm (40 pins breakaway) $0.44 2 $0.88 https://www.digikey.com/product-detail/en/0022286043/WM22771-ND/3158673 Right angle needed for touch sensor connection. Actually, I had to create my own right angle ones from straight ones to be long enough. They need to be about 10mm long from the touch PCB down to the pin headers, so buy the longest straight ones you can and bend them, then cut to size after you try to fit. Or, you can buy them from digikey.
Pin Male Header Straight 2.54mm (40 pins breakaway) $0.14 1 $0.14 https://lcsc.com/product-detail/Pin-Header-Female-Header_Nextronics-Engineering-Z-211-4011-0021-001_C113597.html Break off all headers for the numerous areas that need a male header pin.
0.1uF Capacitor smoothing for TMP36 $0.01 1 $0.01 https://lcsc.com/product-detail/Others_Vishay-Intertech_VJ0402G104KXQCW1BC_Vishay-Intertech-VJ0402G104KXQCW1BC_C169292.html TMP36 can give somewhat noisy temperature measurements. This cap on the input 3.3v on sensor can smooth out the output readings. You can operate without this cap since the software does multiple readings to average it.
Actuator $-
Stepper Motor 35mm $2.90 1 $2.90 https://www.aliexpress.com/item/2054451318.html Cut off the PCB and resolder the 4 Pin silicone wire to the leads on the stepper. Make wire long enough you can connect to PCB while it's outside the actuator, around 4 to 6 inches.
Neodymium Disc Mini Magnet 3x1.5mm $0.05 1 $0.05 https://www.aliexpress.com/item/32949884024.html Magnet needed to trigger hall effect sensor
Hall Effect Sensor SIP-3 $0.14 1 $0.14 https://lcsc.com/product-detail/Sensors_SK1816G-G03-K_C73293.html Place into slot on bottom of 3D printed actuator, then place compression 3D printed backing to keep in place as close to magnet as you can.
Heatsink 540/550 Motor $1.00 1 $1.00 https://www.aliexpress.com/item/33004830927.html Cut heatsink in half to service 2 actuators
4 Pin 30AWG Silicone Wire Ultra Flexible $0.24 1 $0.24 https://www.aliexpress.com/item/32870367030.html Use this wire to connect hall effect and TMP36 sensors to main PCB. Solder 3 wires to each sensor and then to 2.54mm standard 3 pin female headers.
TMP36 Temperature Sensor TO-92 $1.08 1 $1.08 https://lcsc.com/product-detail/Temperature-Sensors_ADI_TMP36GT9Z_TMP36GT9Z_C53490.html Temperature sensor is pushed against stepper motor to watch motor temp as it can get hot and melt the 3D printed parts, ruining the actuator.
$-
$13.78 $14.84
Other Stepper Motors
Higher end 35mm stepper Moon's $25.00 1 $25.00 https://www.moonsindustries.com/p/35mm-permanent-magnet-stepper-motors/35pm048s8-08001-000004611120001819 Not sure it's worth the money, but this motor is nice. I'm finding the cheaper motors are just about as good, but perhaps not as quiet or tight feeling as the Moon's.
Another cheap 35mm that's really nice $3.00 1 $3.00 https://www.aliexpress.com/item/32975464158.html This is a very nice motor and cheap, but you have to grind off the gear on the 3mm shaft, which is painful.

About

This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages