SolidPython

• SolidPython: OpenSCAD for Python
• Advantages
• Installing SolidPython
• Using SolidPython
• Example Code
• Extra syntactic sugar
  • Basic operators
  • First-class Negative Space (Holes)
  • Animation
• solid.utils
  • Directions: (up, down, left, right, forward, back) for arranging things:
  • Arcs
  • Offsets
  • Extrude Along Path
  • Basic color library
  • Bill Of Materials
• solid.screw_thread
• Contact

Table of Contents generated with DocToc

SolidPython: OpenSCAD for Python

SolidPython is a generalization of Phillip Tiefenbacher's openscad module, found on Thingiverse. It generates valid OpenSCAD code from Python code with minimal overhead. Here's a simple example:

This Python code:

from solid import *
d = difference()(
    cube(10),
    sphere(15)
)
print scad_render( d)

Generates this OpenSCAD code:

difference(){
    cube(10);
    sphere(15);
}

That doesn't seem like such a savings, but the following SolidPython code is a lot shorter (and I think a lot clearer) than the SCAD code it compiles to:

d = cube( 5) + right(5)( sphere(5)) - cylinder( r=2, h=6)

Generates this OpenSCAD code:

difference(){
    union(){
        cube(5);
        translate( [5, 0,0]){
            sphere( 5);
        }
    }
    cylinder( r=2, h=6);
}

Advantages

Because you're using Python, a lot of things are easy that would be hard or impossible in pure OpenSCAD. Among these are:

• built-in dictionary types
• mutable, slice-able list and string types
• recursion
• external libraries (images! 3D geometry! web-scraping! ...)

Installing SolidPython

• Install via [PyPI](python setup.py sdist bdist_wininst upload):

  sudo easy_install solidpython
  

  At time of writing, pip install solidpython will NOT work (13 Feb 2013)

• OR: Download SolidPython ( Click here to download directly, or use git to pull it all down)

  ( Note that SolidPython also depends on the PyEuclid Vector math library, installable via sudo pip install euclid)

  • Unzip the file, probably in ~/Downloads/SolidPython-master

  • In a terminal, cd to location of file:

    cd ~/Downloads/SolidPython-master
    

  • Run the install script:

    sudo python setup.py --install
    

Using SolidPython

• Include SolidPython at the top of your Python file:

  from solid import *
  from solid.utils import *  # Not required, but the utils module is useful
  

• To include other scad code, call use("/path/to/scadfile.scad") or include("/path/to/scadfile.scad"). This is identical to what you would do in OpenSCAD.

• OpenSCAD uses curly-brace blocks ({}) to create its tree. SolidPython uses parentheses with comma-delimited lists. OpenSCAD:

  difference(){
      cube(10);
      sphere(15);
  }
  

  SolidPython:

  d = difference()(
      cube(10),  # Note the comma between each element!
      sphere(15)
  )
  

• Call scad_render( py_scad_obj) to generate SCAD code. This returns a string of valid OpenSCAD code.

• or: call scad_render_to_file( py_scad_obj, filepath) to store that code in a file.

• If 'filepath' is open in the OpenSCAD IDE and Design => 'Automatic Reload and Compile' is checked (in the OpenSCAD IDE), calling scad_render_to_file() from Python will load the object in the IDE.

• Alternately, you could call OpenSCAD's command line and render straight to STL.

Example Code

The best way to learn how SolidPython works is to look at the included example code. If you've installed SolidPython, the following line of Python will print the location of the examples directory:

    import os, solid; print os.path.dirname( solid.__file__) + '/examples'

Or browse the example code on Github here

Adding your own code to the example file solid/examples/solidpython_template.py will make some of the setup easier.

Extra syntactic sugar

Basic operators

Following Elmo Mäntynen's suggestion, SCAD objects override the basic operators + (union), - (difference), and * (intersection). So

c = cylinder( r=10, h=5) + cylinder( r=2, h=30)

is the same as:

c = union()(
    cylinder( r=10, h=5),
    cylinder( r=2, h=30)
)

Likewise:

c = cylinder( r=10, h=5)
c -= cylinder( r=2, h=30)

is the same as:

c = difference()(
    cylinder( r=10, h=5),
    cylinder( r=2, h=30)
)

First-class Negative Space (Holes)

OpenSCAD requires you to be very careful with the order in which you add or subtract objects. SolidPython's hole() function makes this process easier.

Consider making a joint where two pipes come together. In OpenSCAD you need to make two cylinders, union them, then make two smaller cylinders, union them, then subtract the smaller from the larger.

Using hole(), you can make a pipe, specify that its center should remain open, and then add two pipes together knowing that the central void area will stay empty no matter what other objects are added to that structure.

Example:

outer = cylinder(r=pipe_od, h=seg_length)
inner = cylinder(r=pipe_id, h=seg_length)
pipe_a = outer - hole()(inner)

Once you've made something a hole, eventually you'll want to put something, like a bolt, into it. To do this, we need to specify that there's a given 'part' with a hole and that other parts may occupy the space in that hole. This is done with the part() function.

See solid/examples/hole_example.py for the complete picture.

Animation

OpenSCAD has a special variable, $t, that can be used to animate motion. SolidPython can do this, too, using the special function scad_render_animated_file().

See solid/examples/animation_example.py for more details.

solid.utils

SolidPython includes a number of useful functions in solid/utils.py. Currently these include:

Directions: (up, down, left, right, forward, back) for arranging things:

up(10)(
    cylinder()
)

seems a lot clearer to me than:

translate( [0,0,10])(
    cylinder()
)

Again, I took this from someone's SCAD work and have lost track of the original author. My apologies.

Arcs

I've found this useful for fillets and rounds.

arc( rad=10, start_degrees=90, end_degrees=210)

draws an arc of radius 10 counterclockwise from 90 to 210 degrees.

arc_inverted( rad=10, start_degrees=0, end_degrees=90) 

draws the portion of a 10x10 square NOT in a 90 degree circle of radius 10. This is the shape you need to add to make fillets or remove to make rounds.

Offsets

To offset a set of points in one direction or another ( inside or outside a closed figure, for example) use solid.utils.offset_points( point_arr, offset, inside=True)

Note that, for a non-convex figure, inside and outside may be non-intuitive. The simple solution is to manually check that your offset is going in the direction you intend, and change the boolean value of inside if you're not happy.

See the code for futher explanation. Improvements on the inside/outside algorithm would be welcome.

Extrude Along Path

solid.utils.extrude_along_path( shape_pts, path_pts, scale_factors=None)

See solid/examples/path_extrude_example.py for use.

Basic color library

You can change an object's color by using the OpenSCAD color([rgba_array]) function:

transparent_blue = color( [0,0,1, 0.5])( cube(10))  # Specify with RGB[A]
red_obj = color( Red)( cube( 10))                   # Or use predefined colors

These colors are pre-defined in solid.utils:

* Red	* Green	* Blue
* Cyan	* Magenta	* Yellow
* Black	* White	* Transparent
* Oak	* Pine	* Birch
* Iron	* Steel	* Stainless
* Aluminum	* Brass	* BlackPaint
* FiberBoard

I took this from someone on Thingiverse and I'm ashamed that I can't find the original source. I owe someone some attribution.

Bill Of Materials

Put @bom_part() before any method that defines a part, then call bill_of_materials() after the program is run, and all parts will be counted, priced and reported.

The example file solid/examples/bom_scad.py illustrates this. Check it out.

solid.screw_thread

solid.screw_thread includes a method, thread() that makes internal and external screw threads.

See solid/examples/screw_thread_example.py for more details.

Contact

Enjoy, and please send any questions or bug reports to me at evan_t_jones@mac.com. Cheers! Evan