lifxlan is a Python module for locally controlling LIFX devices (such as lightbulbs) over a LAN. It implements the LIFX LAN Protocol V2 specification.
To get the latest stable release:
sudo pip install lifxlan
However, to be guaranteed to get the most recent features and fixes you can install from source with:
sudo python setup.py install
See the examples folder for example scripts that use lifxlan.
Many of the examples perform device discovery in the beginning in order to find indvidual bulbs, which causes a short but noticeable delay. However, see broadcast_on.py, broadcast_off.py, and broadcast_color.py for ways to send commands to all lights quickly from the command line without doing device discovery.
You can do several things with this library:
- Control LIFX devices using the package's high-level API (see the
examplesfolder and the following API sections). - Build your own high-level API on top of the low-level networking messages.
- Build virtual LIFX devices in software (think adapters for Philips Hue bulbs, Wemo, etc).
- lifxlan.py - Provides the LifxLAN API, and low-level API for sending broadcast LIFX packets to the LAN.
- device.py - Provides the Device API, and low-level API for sending unicast LIFX packets to a Device.
- light.py - Provides the Light API. Subclass of Device.
# power can be "on"/"off", True/False, 0/1, or 0/65535
# color is a list of HSBK values: [hue (0-65535), saturation (0-65535), brightness (0-65535), Kelvin (2500-9000)]
# duration is the transition time in milliseconds
# rapid is True/False. If True, don't wait for device response before proceeding, just send multiple packets and move on
# arguments in [square brackets] are optional
get_lights() # returns list of Light objects
set_power_all_lights(power, [duration], [rapid]) # set power for all lights on LAN
set_color_all_lights_color(color, [duration], [rapid]) # set color for all lights on LAN
get_power_all_lights() # returns dict of Light, power pairs
get_color_all_lights() # returns dict of Light, color pairs
Note: These have only been tested on one bulb so far. If you test the above calls on a setup with multiple bulbs, let me know how it goes!
# label is a string, 32 char max
# power can be "on"/"off", True/False, 0/1, or 0/65535
# rapid is True/False. If True, don't wait for device response before proceeding, just send multiple packets and move on
# arguments in [square brackets] are optional
set_label(label)
set_power(power, [rapid])
get_mac_addr()
get_ip_addr()
get_service() # returns int, 1 = UDP
get_port()
get_label()
get_power() # returns 0 for off, 65535 for on
get_host_firmware_tuple() # returns (build_timestamp (in nanoseconds), version)
get_host_firmware_build_timestamp()
get_host_firmware_version()
get_wifi_info_tuple() # returns (wifi_signal_mw, wifi_tx_bytes, wifi_rx_bytes)
get_wifi_signal_mw()
get_wifi_tx_bytes()
get_wifi_rx_bytes()
get_wifi_firmware_tuple() # returns (build_timestamp (in nanoseconds), version)
get_wifi_firmware_build_timestamp()
get_wifi_firmware_version()
get_version_tuple() # returns (vendor, product, version)
get_vendor()
get_product()
get_version()
get_info_tuple() # returns (time (current timestamp in ns), uptime (in ns), downtime (in ns, +/- 5 seconds))
get_time()
get_uptime()
get_downtime()
The Light API provides everything in the Device API, as well as:
# power can be "on"/"off", True/False, 0/1, or 0/65535
# color is a HSBK list of values: [hue (0-65535), saturation (0-65535), brightness (0-65535), Kelvin (2500-9000)]
# duration is the transition time in milliseconds
# rapid is True/False. If True, don't wait for device response before proceeding, just send multiple packets and move on
# arguments in [square brackets] are optional
set_power(power, [duration], [rapid])
set_color(color, [duration], [rapid])
get_power() # returns 0 or 65535
get_color() # returns color (HSBK list)
The Light API also provides macros for basic colors, like RED, BLUE, GREEN, etc. Setting colors is as easy as mybulb.set_color(BLUE). See light.py for complete list of color macros.
The LIFX LAN protocol V2 specification is officially documented here. In lifxlan, you can see the underlying stream of packets being sent and received at any time by initializing the LifxLAN object with the verbose flag set: lifx = LifxLAN(verbose = True). (Ssee examples/verbose_lan.py.)
The files that deal with LIFX packet construction and representation are:
- message.py - Defines the message fields and the basic packet structure.
- msgtypes.py - Provides subclasses for each LIFX message type, along with their payload constructors.
- unpack.py - Creates a LIFX message object from a string of binary data (crucial for receiving messages).
Happy hacking!