Skip to content
master
Go to file
Code

README.md

Hijacker

Hijacker is a Graphical User Interface for the penetration testing tools Aircrack-ng, Airodump-ng, MDK3 and Reaver. It offers a simple and easy UI to use these tools without typing commands in a console and copy&pasting MAC addresses.

This application requires an ARM android device with an internal wireless adapter that supports Monitor Mode. A few android devices do, but none of them natively. This means that you will need a custom firmware. Any device that uses the BCM4339 chipset (MSM8974, such as Nexus 5, Xperia Z1/Z2, LG G2, LG G Flex, Samsung Galaxy Note 3) will work with Nexmon (which also supports some other chipsets). Devices that use BCM4330 can use bcmon.

An alternative would be to use an external adapter that supports monitor mode in Android with an OTG cable.

The required tools are included for ARM devices. The Nexmon firmware and management utility for BCM4339 and BCM4358 are also included.

Root access is also necessary, as these tools need root to work.

Discontinued

The app has been discontinued since a completely new iteration is currently under development. Since the new version will not be available for a long time, this repo remains open for recommendations and feature requests which will be implemented in the new version. Critical changes may still be provided, along with help for building, maintaining, and updating the code (though I wouldn't recomment it). Bug reports are also welcome as long as they come from the latest released version, since some of this code might be used in the new project.

Features

Information Gathering

  • View a list of access points and stations (clients) around you (even hidden ones)
  • View the activity of a specific network (by measuring beacons and data packets) and its clients
  • Statistics about access points and stations
  • See the manufacturer of a device (AP or station) from the OUI database
  • See the signal power of devices and filter the ones that are closer to you
  • Save captured packets in .cap file

Attacks

  • Deauthenticate all the clients of a network (either targeting each one (effective) or without specific target)
  • Deauthenticate a specific client from the network it's connected
  • MDK3 Beacon Flooding with custom options and SSID list
  • MDK3 Authentication DoS for a specific network or to every nearby AP
  • Capture a WPA handshake or gather IVs to crack a WEP network
  • Reaver WPS cracking (pixie-dust attack using NetHunter chroot and external adapter)

Other

  • Leave the app running in the background, optionally with a notification
  • Copy commands or MAC addresses to clipboard
  • Includes the required tools, no need for manual installation
  • Includes the Nexmon driver, required library and management utility for BCM4339 and BCM4358 devices
  • Set commands to enable and disable monitor mode automatically
  • Crack .cap files with a custom wordlist
  • Create custom actions and run them on an access point or a client easily
  • Sort and filter Access Points and Stations with many parameters
  • Export all gathered information to a file
  • Add a persistent alias to a device (by MAC) for easier identification

More Screenshots

Installation

Make sure:

  • you are on Android 5+
  • you are rooted
  • you have a firmware to support Monitor Mode on your wireless interface

Download the latest version here.

When you run Hijacker for the first time, you will be asked whether you want to install the nexmon firmware or go to home screen. If you have installed your firmware or use an external adapter, you can just go to the home screen. Otherwise, and if your device is supported, click 'Install Nexmon' to install the Nexmon firmware. When you're done, you will land on the home screen and airodump will start. Make sure you have enabled your WiFi and it's in monitor mode.

Note: On some devices, changing files in /system might trigger an Android security feature and your system partition will be restored when you reboot.

Troubleshooting

SU binary not found!

Hijacker needs root access to run. It expects a su binary file, which is a shell executed with root privileges. On startup, the app runs a which su command. If you are getting this message, then this command has failed. Either you are not rooted, or your root solution did not provide a su binary in a PATH accessible directory.

No root access

Hijacker needs root access to run. It runs all its commands through su. When su is called, some app on your device (which manages the root access, e.g. SuperSU, Superuser) should ask you if you want to grant root access to Hijacker. If access is denied, you get this message. Make sure that Hijacker is authorized to run root commands.

Directory 'bin/lib' could not be created

This means that the app failed to create the 'bin' or 'lib' directories in its own directory within the system. If you see this, something is wrong with your OS, Hijacker can't do anything about this.

The architecture of this device is not ARM.

This app is designed and tested for ARM devices. All the included binaries and libraries are compiled for that architecture and will not work on anything else. If you get this message, you have to install them manually (busybox, aircrack-ng suite, mdk3, reaver, wireless tools, libfakeioctl.so library) in a PATH accessible directory and set the 'Prefix' option for the tools to preload the library they need: LD_PRELOAD=/path/to/libfakeioctl.so.

Hijacker watchdog detected a problem

Hijacker runs a background service to make sure that the tools that are supposed to be running, are actually running, and the tools that are supposed to be stopped, are stopped. In the event one of these checks fails, you will get a warning.

Something is not running: This could be caused by a tool stopping unexpectedly, which could be a sign of bad parameters, tool working differently that the app expects, other software on the device killing it, wifi turned off or not in monitor mode, or even a broken tool (if you compiled it manually).

Something is still running: This could be caused by a failed 'stop' operation by the app or the tool running on its own (if you have left the app open in the background and you run the tool by yourself). A failed 'stop' operation could be caused by denied root access, or starting the app after it crashed and didn't get a change to run the 'stop' operations (although this shouldn't happen).

Can't open shell to generate the bug report

The app crashed, a new activity came up, and it says it can't open a shell to generate the bug report. This means exactly what it says. It can't open a root shell; it executed su and failed. No/denied or improperly configured root access. Hijacker needs root access to generate the bug report because it needs to get the device's logfiles, attempt to run the tools to make sure they are installed correctly, read the WiFi firmware, etc.

Can't create report (external storage write access denied)

Self explanatory.

Miscellaneous

In settings, there is an option to test the tools. If something goes wrong, you can click 'Copy test command' and select the tool that fails. This will copy a test command to your clipboard, which you can manually run in a root shell and see what's wrong. If all the tests pass and you still have a problem, feel free to open an issue here to fix it, or use the 'Send feedback' option in the app's settings.

If the app happens to crash, a new activity will come up with the option to submit a bug report via email. You can see exactly what the report contains, it's a simple text file. This will be very helpful for the development of Hijacker, but keep in mind that the app contains filtered device logs, which may contain information like MAC addresses, SSIDs, device details etc.

Keep in mind that Hijacker is just a GUI for these tools. The way it runs the tools is fairly simple, and if all the tests pass and you are in monitor mode, you should be getting the results you want. Also keep in mind that these are auditing tools. This means that they are used to test the integrity of your network, so there is a chance (and you should hope for it) that the attacks don't work on your network. However, if an attack works when you type a command in a terminal, but not with the app, feel free to post here to resolve the issue. This app is still under development so bugs are to be expected.

Do not report bugs for devices that are not supported or when you are using an outdated version.

Warning

Legal

It is illegal to use this application against networks for which you don't have permission. You can use it only on your network or a network that you are authorized to. Using software that uses a network adapter in promiscuous mode may be considered illegal even without actively using it against someone. I am not responsible for how you use this application and any damages you may cause.

Device

The app gives you the option to install the Nexmon firmware on your device. Even though the app performs a chipset check, mistakes happen. The app currently includes the Nexmon firmware for BCM4339 and BCM4358 only. Installing the wrong firmware on a device may damage it (and I mean hardware, not something that is fixable with factory reset). I am not responsible for any damage caused to you, your device, your house, your cat, or anyne and anything else, by this software.

Consider yourself warned.

Donate

If you like my work, you can buy me a beer. :)

paypal

You can’t perform that action at this time.