Releases: ciribob/DCS-SimpleRadioStandalone
Release 1.9.7.0
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Added new SSML option to SRS External Audio for GoogleTTS
- Added Hind
- Added C101 front and rear radio selectors in DCS - thanks to AvioDev!
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Release 1.9.6.0
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Added PTT delay option (only for SRS controls). Protects against accidental presses
- Auto EAM disconnect. If DCS is detected EAM is automatically disconnected. EAM is only for use without DCS running.
- Added warning if Mic Passthrough is set to the same device as Output speakers. This protects users from misconfiguring it (hopefully)
- Added many new features to SRS External Audio (DCS LUA is also updated - https://github.com/ciribob/DCS-SimpleTextToSpeech):
- Google Text to Speech added
- Support for Ogg as well as MP3s
- For both Google & Microsoft TTS you can specify the exact voice, or let it pick with gender and locale
- Added optional location (Latitude, Longitude, Altitude) so you can position the transmission. Line of Sight and Distance are respected if enabled.
- Added speed option for TTS voice
- Added new command line interface for SRS External Audio - named arguments with short and long names
- Added improved help to SRS External Audio
- Added native support for NAO T-45 Goshawk mod including Intercom Hot Mic - https://forums.eagle.ru/topic/203816-vnao-t-45-goshawk/
- Added native support for A-29B Super Tacano mod https://github.com/luizrenault/a-29b-community
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Release 1.9.5.0
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Fix for mic passthrough audio sounding "muddy"
- Changed SRS overlay in DCS to give more info - disable this in SRS settings page inside DCS Settings (as per the text!). Thanks to LazyBoot for the idea!
- Sorted list on the SRS client by name and coalition
- Changed defaults for SRS to enable background radio effects (excluding NATO)
- Added culture / locale and gender as optional parameters to SRS External Audio - thank to @uriba107
Thanks to you all for the support - SRS Team - Changed default - more effects are enabled when you first install SRS
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Release 1.9.4.0
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Fix for stutter in multiple radios receive under certain circumstances
- Fix for Hornet Transponder codes not allowing codes starting with 0
- Enabled HOT MIC for the UH1 between the crew - you will need to disable always allow SRS hotkeys and enable DCS PTT in SRS (the default)
- MIDS - Line of Sight and Distance Limitations removed. We assume a Link16 network is in place
Thanks to you all for the support - SRS Team
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
Release 1.9.3.0
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Fix for AWACS Intercom issue - caused high CPU and fixed channels to not load
- Improved Mic Passthrough to apply effects properly
- Fixed possible corruption of Settings File
- F/A-18C - Transponder via UFC control - Thanks to Santi for the code & ED for adding the new IFF controls
- Added support for F-14 IDENT via UHF Mic transmit - Thanks to JTFF | kiloWatt | VF84
- Added key bind for IDENT Toggle (for non cockpit transponders)
- Changed Simultaneous transmission on AWACS to not broadcast over currently selected radios if intercom is selected
- Fixed Next and Previous Radio logic - both loop correctly
- Added experimental support for Hot Mic in C101CC & EB
- Added new controls for background radio effects - all effects can be tuned on a per aircraft basis with unique volume controls
Thanks to you all for the support - SRS Team
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
DCS-SRS Release 1.9.2.1
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Added ability to easily swap between PTT Tones in SRS Settings
- Added ability to easily add custom PTT tones to SRS. Simply add a 48Khz Mono 16 bit Wav (use audacity or similar to swap) and name it RADIO_TRANS_END_SOMETHING.wav or RADIO_TRANS_START_SOMETHINGELSE.wav. Once you restart SRS (and if the format is valid) it will appear in the dropdown and allow you to change it.
- Added HQ / HAVEQUICK specific effect
- Added new VHF, UHF, HF and FM effect tones that can be optionally enabled. Give them a go as the effect is great!
Thanks to you all for the support - SRS Team
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
BETA: New audio effects and per aircraft PTT tones
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Added ability to easily swap between PTT Tones in SRS Settings
- Added ability to easily add custom PTT tones to SRS. Simply add a 48Khz Mono 16 bit Wav (use audacity or similar to swap) and name it RADIO_TRANS_END_SOMETHING.wav or RADIO_TRANS_START_SOMETHINGELSE.wav. Once you restart SRS (and if the format is valid) it will appear in the dropdown and allow you to change it.
- Added new VHF, UHF, HF and FM effect tones that can be optionally enabled. Give them a go as the effect is great!
Thanks to you all for the support - SRS Team
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
DCS-SRS Release 1.9.1.2
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
- Updated Theme icons - thanks to Kobalt
- Updated sound effects for PTT - thanks to Bimbac
- Changed audio pipeline to 48K for output
- Fixed P47 SRS Integration
- Improved Server Detection for the installer
- Added PTT Release delay to profile
- Fixed LotATC position sync with SRS
- Reverted DCS integration changes - now uses Export.lua again
- Increased size of Address / IP Text Box
- Moved Patreon Link
Thanks to you all for the support - SRS Team
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
DCS-SRS Release 1.9.1.0 - BETA
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
THIS IS A BETA - PLEASE TEST IF YOU CAN AND GIVE FEEDBACK ON ALL AUDIO EFFECTS -too loud etc
- Reworked Audio Pipeline to 48K
- Redid all sound effects with new pipeline and hopefully improved audio volume / balance
- Fixed P47 radio
- Added new PTT start and end tones
- Improved KY-58 tones
- Improved installer server detection - Remember - DONT install the client scripts on the server
Thanks to you all for the support - SRS Team
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍
DCS-SRS Release 1.9.0.3
Important Links
Donations - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Support - Discord - https://discord.gg/vqxAw7H
Installation and Update Instructions
Download and run SRS-AutoUpdater.exe
OR
Extract ALL the files from the "DCS-SimpleRadioStandalone.zip" (link below) zip into a temporary folder and just run the installer which'll replace any previous version installed automatically.
Changelog
This version of SRS is NOT BACKWARDS COMPATIBLE WITH 1.8.X.X and will only work on SRS releases 1.9.0.0 or newer
- Added Command Line External Audio Utility - allows SRS servers to easily play MP3 or text to speech over SRS - see https://youtu.be/FR6MwtloZzI
- Added basic server directory check for the installer - scripts should not be installed to any DCS.server folder in saved games
Thanks to you all for the support - SRS Team
DCS / VR Compatible Overlay
The overlay has 4 states, hidden, small, small+volume & full that you can see by pressing Left Control + Left Shift + Escape by default.
The Full state has a title bar that you can click and drag the window around with. The window position will be saved for when DCS is next opened.
To configure the overlay hotkey, run DCS and go to the SRS Section inside the DCS Settings
Troubleshooting / Support
Please ask on Discord https://discord.gg/baw7g3t
Donation Link - Patreon: https://www.patreon.com/ciribob or Paypal: https://tinyurl.com/srs-donate
Server Hosting
For the server you need to open TCP AND UDP PORTS 5002 unless you've changed the server port using the server config file. The server tries to open the ports using UPNP
Banned IPs are added to a file created where ever the server is run called banned.txt. To unban, just delete the IP from the file and restart the server.
The server will always open ONE PORT in two Protocols TCP and UDP - you can control this with the Config file. If you cant press PTT but everything else looks fine - this is why and indicated with the VoIP Green Plug 👍