netapp.cpp

/*****************************************************************************
*
*  netapp.c  - CC3000 Host Driver Implementation.
*  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Adapted for use with the Arduino/AVR by KTOWN (Kevin Townsend) 
* & Limor Fried for Adafruit Industries
* This library works with the Adafruit CC3000 breakout 
*	----> https://www.adafruit.com/products/1469
* Adafruit invests time and resources providing this open source code,
* please support Adafruit and open-source hardware by purchasing
* products from Adafruit!
*
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions
*  are met:
*
*    Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the   
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#include <string.h>
#include "netapp.h"
#include "hci.h"
#include "socket.h"
#include "evnt_handler.h"
#include "nvmem.h"

#define MIN_TIMER_VAL_SECONDS      20
#define MIN_TIMER_SET(t)    if ((0 != t) && (t < MIN_TIMER_VAL_SECONDS)) \
                            { \
                                t = MIN_TIMER_VAL_SECONDS; \
                            }


#define NETAPP_DHCP_PARAMS_LEN 				(20)
#define NETAPP_SET_TIMER_PARAMS_LEN 		(20)
#define NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN	(4)
#define NETAPP_PING_SEND_PARAMS_LEN			(16)


//*****************************************************************************
//
//!  netapp_config_mac_adrress
//!
//!  @param  mac   device mac address, 6 bytes. Saved: yes 
//!
//!  @return       return on success 0, otherwise error.
//!
//!  @brief        Configure device MAC address and store it in NVMEM. 
//!                The value of the MAC address configured through the API will
//!		             be stored in CC3000 non volatile memory, thus preserved 
//!                over resets.
//
//*****************************************************************************
long netapp_config_mac_adrress(unsigned char * mac)
{
	return  nvmem_set_mac_address(mac);
}

//*****************************************************************************
//
//!  netapp_dhcp
//!
//!  @param  aucIP               device mac address, 6 bytes. Saved: yes 
//!  @param  aucSubnetMask       device mac address, 6 bytes. Saved: yes 
//!  @param  aucDefaultGateway   device mac address, 6 bytes. Saved: yes 
//!  @param  aucDNSServer        device mac address, 6 bytes. Saved: yes 
//!
//!  @return       return on success 0, otherwise error.
//!
//!  @brief       netapp_dhcp is used to configure the network interface, 
//!               static or dynamic (DHCP).\n In order to activate DHCP mode, 
//!               aucIP, aucSubnetMask, aucDefaultGateway must be 0.
//!               The default mode of CC3000 is DHCP mode.
//!               Note that the configuration is saved in non volatile memory
//!               and thus preserved over resets.
//!	 
//! @note         If the mode is altered a reset of CC3000 device is required 
//!               in order to apply changes.\nAlso note that asynchronous event 
//!               of DHCP_EVENT, which is generated when an IP address is 
//!               allocated either by the DHCP server or due to static 
//!               allocation is generated only upon a connection to the 
//!               AP was established. 
//!
//*****************************************************************************
long netapp_dhcp(unsigned long *aucIP, unsigned long *aucSubnetMask,unsigned long *aucDefaultGateway, unsigned long *aucDNSServer)
{
	signed char scRet;
	unsigned char *ptr;
	unsigned char *args;
	
	scRet = EFAIL;
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Fill in temporary command buffer
	ARRAY_TO_STREAM(args,aucIP,4);
	ARRAY_TO_STREAM(args,aucSubnetMask,4);
	ARRAY_TO_STREAM(args,aucDefaultGateway,4);
	args = UINT32_TO_STREAM(args, 0);
	ARRAY_TO_STREAM(args,aucDNSServer,4);
	
	// Initiate a HCI command
	hci_command_send(HCI_NETAPP_DHCP, ptr, NETAPP_DHCP_PARAMS_LEN);
	
	// Wait for command complete event
	SimpleLinkWaitEvent(HCI_NETAPP_DHCP, &scRet);
	
	return(scRet);
}


//*****************************************************************************
//
//!  netapp_timeout_values
//!
//!  @param  aucDHCP    DHCP lease time request, also impact 
//!                     the DHCP renew timeout. Range: [0-0xffffffff] seconds,
//!                     0 or 0xffffffff == infinity lease timeout.
//!                     Resolution:10 seconds. Influence: only after 
//!                     reconnecting to the AP. 
//!                     Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds.
//!                     The parameter is saved into the CC3000 NVMEM. 
//!                     The default value on CC3000 is 14400 seconds.
//!	 
//!  @param  aucARP     ARP refresh timeout, if ARP entry is not updated by
//!                     incoming packet, the ARP entry will be  deleted by
//!                     the end of the timeout. 
//!                     Range: [0-0xffffffff] seconds, 0 == infinity ARP timeout
//!                     Resolution: 10 seconds. Influence: on runtime.
//!                     Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds
//!                     The parameter is saved into the CC3000 NVMEM. 
//!	                    The default value on CC3000 is 3600 seconds.
//!
//!  @param  aucKeepalive   Keepalive event sent by the end of keepalive timeout
//!                         Range: [0-0xffffffff] seconds, 0 == infinity timeout
//!                         Resolution: 10 seconds.
//!                         Influence: on runtime.
//!                         Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec
//!                         The parameter is saved into the CC3000 NVMEM. 
//!                         The default value on CC3000 is 10 seconds.
//!
//!  @param  aucInactivity   Socket inactivity timeout, socket timeout is
//!                          refreshed by incoming or outgoing packet, by the
//!                          end of the socket timeout the socket will be closed
//!                          Range: [0-0xffffffff] sec, 0 == infinity timeout.
//!                          Resolution: 10 seconds. Influence: on runtime.
//!                          Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec
//!                          The parameter is saved into the CC3000 NVMEM. 
//!	                         The default value on CC3000 is 60 seconds.
//!
//!  @return       return on success 0, otherwise error.
//!
//!  @brief       Set new timeout values. Function set new timeout values for: 
//!               DHCP lease timeout, ARP  refresh timeout, keepalive event 
//!               timeout and socket inactivity timeout 
//!	 
//! @note         If a parameter set to non zero value which is less than 20s,
//!               it will be set automatically to 20s.
//!
//*****************************************************************************

#ifndef CC3000_TINY_DRIVER
long 
netapp_timeout_values(unsigned long *aucDHCP, unsigned long *aucARP,unsigned long *aucKeepalive,	unsigned long *aucInactivity)
{
	signed char scRet;
	unsigned char *ptr;
	unsigned char *args;
	
	scRet = EFAIL;
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Set minimal values of timers 
	MIN_TIMER_SET(*aucDHCP)
    MIN_TIMER_SET(*aucARP)
	MIN_TIMER_SET(*aucKeepalive)
	MIN_TIMER_SET(*aucInactivity)
					
	// Fill in temporary command buffer
	args = UINT32_TO_STREAM(args, *aucDHCP);
	args = UINT32_TO_STREAM(args, *aucARP);
	args = UINT32_TO_STREAM(args, *aucKeepalive);
	args = UINT32_TO_STREAM(args, *aucInactivity);
	
	// Initiate a HCI command
	hci_command_send(HCI_NETAPP_SET_TIMERS, ptr, NETAPP_SET_TIMER_PARAMS_LEN);
	
	// Wait for command complete event
	SimpleLinkWaitEvent(HCI_NETAPP_SET_TIMERS, &scRet);
	
	return(scRet);
}
#endif


//*****************************************************************************
//
//!  netapp_ping_send
//!
//!  @param  ip              destination IP address
//!  @param  pingAttempts    number of echo requests to send
//!  @param  pingSize        send buffer size which may be up to 1400 bytes 
//!  @param  pingTimeout     Time to wait for a response,in milliseconds.
//!
//!  @return       return on success 0, otherwise error.
//!
//!  @brief       send ICMP ECHO_REQUEST to network hosts 
//!	 
//! @note         If an operation finished successfully asynchronous ping report 
//!               event will be generated. The report structure is as defined
//!               by structure netapp_pingreport_args_t.
//!
//! @warning      Calling this function while a previous Ping Requests are in 
//!               progress will stop the previous ping request.
//*****************************************************************************

#ifndef CC3000_TINY_DRIVER
long
netapp_ping_send(uint32_t *ip, uint32_t ulPingAttempts, uint32_t ulPingSize, uint32_t ulPingTimeout)
{
	signed char scRet;
	unsigned char *ptr, *args;
	
	scRet = EFAIL;
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Fill in temporary command buffer
	args = UINT32_TO_STREAM(args, *ip);
	args = UINT32_TO_STREAM(args, ulPingAttempts);
	args = UINT32_TO_STREAM(args, ulPingSize);
	args = UINT32_TO_STREAM(args, ulPingTimeout);

	/*
	if (CC3KPrinter != 0)
		{
		for(uint8_t i=0; i<4+4+4+4; i++) {
		  CC3KPrinter->print(" 0x"); CC3KPrinter->( (ptr + HEADERS_SIZE_CMD)[i], HEX);
		}
	}
	*/

	// Initiate a HCI command
	hci_command_send(HCI_NETAPP_PING_SEND, ptr, NETAPP_PING_SEND_PARAMS_LEN);
	
	// Wait for command complete event
	SimpleLinkWaitEvent(HCI_NETAPP_PING_SEND, &scRet);
	
	return(scRet);
}
#endif

//*****************************************************************************
//
//!  netapp_ping_report
//!
//!  @param  none
//!
//!  @return  none
//!
//!  @brief   Request for ping status. This API triggers the CC3000 to send 
//!           asynchronous events: HCI_EVNT_WLAN_ASYNC_PING_REPORT.
//!           This event will carry  the report structure:
//!           netapp_pingreport_args_t. This structure is filled in with ping
//!           results up till point of triggering API.
//!           netapp_pingreport_args_t:\n packets_sent - echo sent,
//!           packets_received - echo reply, min_round_time - minimum
//!           round time, max_round_time - max round time,
//!           avg_round_time - average round time
//!	 
//! @note     When a ping operation is not active, the returned structure 
//!           fields are 0.
//!
//*****************************************************************************


#ifndef CC3000_TINY_DRIVER
void netapp_ping_report()
{
	unsigned char *ptr;
	ptr = tSLInformation.pucTxCommandBuffer;
	signed char scRet;
	
	scRet = EFAIL;
	
	// Initiate a HCI command
	hci_command_send(HCI_NETAPP_PING_REPORT, ptr, 0);
	
	// Wait for command complete event
	SimpleLinkWaitEvent(HCI_NETAPP_PING_REPORT, &scRet); 
}
#endif

//*****************************************************************************
//
//!  netapp_ping_stop
//!
//!  @param  none
//!
//!  @return  On success, zero is returned. On error, -1 is returned.      
//!
//!  @brief   Stop any ping request.
//!	 
//!
//*****************************************************************************

#ifndef CC3000_TINY_DRIVER
long netapp_ping_stop()
{
	signed char scRet;
	unsigned char *ptr;
	
	scRet = EFAIL;
	ptr = tSLInformation.pucTxCommandBuffer;
	
	// Initiate a HCI command
	hci_command_send(HCI_NETAPP_PING_STOP, ptr, 0);
	
	// Wait for command complete event
	SimpleLinkWaitEvent(HCI_NETAPP_PING_STOP, &scRet);
	
	return(scRet);
}
#endif

//*****************************************************************************
//
//!  netapp_ipconfig
//!
//!  @param[out]  ipconfig  This argument is a pointer to a 
//!                         tNetappIpconfigRetArgs structure. This structure is
//!                         filled in with the network interface configuration.
//!                         tNetappIpconfigRetArgs:\n aucIP - ip address,
//!                         aucSubnetMask - mask, aucDefaultGateway - default
//!                         gateway address, aucDHCPServer - dhcp server address
//!                         aucDNSServer - dns server address, uaMacAddr - mac
//!                         address, uaSSID - connected AP ssid
//!
//!  @return  none
//!
//!  @brief   Obtain the CC3000 Network interface information.
//!           Note that the information is available only after the WLAN
//!       		connection was established. Calling this function before
//!           associated, will cause non-defined values to be returned.
//!	 
//! @note     The function is useful for figuring out the IP Configuration of
//!       		the device when DHCP is used and for figuring out the SSID of
//!       		the Wireless network the device is associated with.
//!
//*****************************************************************************

#ifndef CC3000_TINY_DRIVER
void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig )
{
	unsigned char *ptr;
	
	ptr = tSLInformation.pucTxCommandBuffer;
	
	// Initiate a HCI command
	hci_command_send(HCI_NETAPP_IPCONFIG, ptr, 0);
	
	// Wait for command complete event
	SimpleLinkWaitEvent(HCI_NETAPP_IPCONFIG, ipconfig );
	
}
#else
void netapp_ipconfig( tNetappIpconfigRetArgs * ipconfig )
{

}
#endif

//*****************************************************************************
//
//!  netapp_arp_flush
//!
//!  @param  none
//!
//!  @return  none
//!
//!  @brief  Flushes ARP table
//!
//*****************************************************************************

#ifndef CC3000_TINY_DRIVER
long netapp_arp_flush(void)
{
	signed char scRet;
	unsigned char *ptr;
	
	scRet = EFAIL;
	ptr = tSLInformation.pucTxCommandBuffer;
	
	// Initiate a HCI command
	hci_command_send(HCI_NETAPP_ARP_FLUSH, ptr, 0);
	
	// Wait for command complete event
	SimpleLinkWaitEvent(HCI_NETAPP_ARP_FLUSH, &scRet);
	
	return(scRet);
}
#endif

//*****************************************************************************
//
//!  netapp_set_debug_level
//!
//!  @param[in]      level    debug level. Bitwise [0-8],
//!                         0(disable)or 1(enable).\n Bitwise map: 0 - Critical
//!                         message, 1 information message, 2 - core messages, 3 -
//!                         HCI messages, 4 - Network stack messages, 5 - wlan
//!                         messages, 6 - wlan driver messages, 7 - epprom messages,
//!                         8 - general messages. Default: 0x13f. Saved: no
//!
//!  @return  On success, zero is returned. On error, -1 is returned
//!
//!  @brief   Debug messages sent via the UART debug channel, this function
//!              enable/disable the debug level
//!
//*****************************************************************************


#ifndef CC3000_TINY_DRIVER
long netapp_set_debug_level(unsigned long ulLevel)
{
	signed char scRet;
    unsigned char *ptr, *args;

    scRet = EFAIL;
    ptr = tSLInformation.pucTxCommandBuffer;
    args = (ptr + HEADERS_SIZE_CMD);

    //
    // Fill in temporary command buffer
    //
    args = UINT32_TO_STREAM(args, ulLevel);


    //
    // Initiate a HCI command
    //
    hci_command_send(HCI_NETAPP_SET_DEBUG_LEVEL, ptr, NETAPP_SET_DEBUG_LEVEL_PARAMS_LEN);

    //
	// Wait for command complete event
	//
	SimpleLinkWaitEvent(HCI_NETAPP_SET_DEBUG_LEVEL, &scRet);

    return(scRet);

}
#endif