Zephyr Mon ######
This project is a port of esp_mon2 https://github.com/codewitch-honey-crisis/esp_mon2 to zephyr rtos
See this article https://www.codeproject.com/Articles/5365397/Porting-EspMon-to-ZephyrOS-on-a-STM32-boards-or-ot
This project requires the PC .NET companion application shipped with that project.
Your board must:
- Have a UART which must be bridged to your PC somehow. By default it uses the ST-Link virtual COM port. You can modify it.
- Have a screen - ILI9341 recommended, but you can use your own with some modifications
- Have a board overlay that maps the hardware on your device. Again, you'll have to modify it to add to the supported boards.
Supported Boards ************* #. Nucleo H723ZG #. Nucleo F767ZI