Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.

 2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.

 3) Fix several clang issues on powerpc in selftests, from Tanner Love.

 4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
    Viro.

 5) Out of bounds access in mlx5e driver, from Raed Salem.

 6) Fix transfer buffer memleak in lan78xx, from Johan Havold.

 7) RCU fixups in rhashtable, from Herbert Xu.

 8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.

 9) vxlan FDB dump must be done under RCU, from Ido Schimmel.

10) Fix use after free in mlxsw, from Ido Schimmel.

11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.

12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
    Thiagarajan.

13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.

14) Fix bpf program reference count leaks in mlx5 during
    mlx5e_alloc_rq(), from Xin Xiong.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  vxlan: fix memleak of fdb
  rds: Prevent kernel-infoleak in rds_notify_queue_get()
  net/sched: The error lable position is corrected in ct_init_module
  net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
  net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
  net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
  net/mlx5e: CT: Support restore ipv6 tunnel
  net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
  ionic: unlock queue mutex in error path
  atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
  net: ethernet: mtk_eth_soc: fix MTU warnings
  net: nixge: fix potential memory leak in nixge_probe()
  devlink: ignore -EOPNOTSUPP errors on dumpit
  rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
  MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
  selftests/bpf: fix netdevsim trap_flow_action_cookie read
  ipv6: fix memory leaks on IPV6_ADDRFORM path
  net/bpfilter: Initialize pos in __bpfilter_process_sockopt
  igb: reinit_locked() should be called with rtnl_lock
  e1000e: continue to init PHY even when failed to disable ULP
  ...

Documentation/networking/bareudp.rst

@@ -8,9 +8,8 @@ There are various L3 encapsulation standards using UDP being discussed to
 leverage the UDP based load balancing capability of different networks.
 MPLSoUDP (__ https://tools.ietf.org/html/rfc7510) is one among them.
 
-The Bareudp tunnel module provides a generic L3 encapsulation tunnelling
-support for tunnelling different L3 protocols like MPLS, IP, NSH etc. inside
-a UDP tunnel.
+The Bareudp tunnel module provides a generic L3 encapsulation support for
+tunnelling different L3 protocols like MPLS, IP, NSH etc. inside a UDP tunnel.
 
 Special Handling
 ----------------

Documentation/networking/devlink/devlink-trap.rst

@@ -486,6 +486,10 @@ narrow. The description of these groups must be added to the following table:
      - Contains packet traps for packets that should be locally delivered after
        routing, but do not match more specific packet traps (e.g.,
        ``ipv4_bgp``)
+   * - ``external_delivery``
+     - Contains packet traps for packets that should be routed through an
+       external interface (e.g., management interface) that does not belong to
+       the same device (e.g., switch ASIC) as the ingress interface
    * - ``ipv6``
      - Contains packet traps for various IPv6 control packets (e.g., Router
        Advertisements)

MAINTAINERS

@@ -782,7 +782,7 @@ F:	include/dt-bindings/reset/altr,rst-mgr-a10sr.h
 F:	include/linux/mfd/altera-a10sr.h
 
 ALTERA TRIPLE SPEED ETHERNET DRIVER
-M:	Thor Thayer <thor.thayer@linux.intel.com>
+M:	Joyce Ooi <joyce.ooi@intel.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/altera/

drivers/atm/atmtcp.c

@@ -433,9 +433,15 @@ static int atmtcp_remove_persistent(int itf)
 		return -EMEDIUMTYPE;
 	}
 	dev_data = PRIV(dev);
-	if (!dev_data->persist) return 0;
+	if (!dev_data->persist) {
+		atm_dev_put(dev);
+		return 0;
+	}
 	dev_data->persist = 0;
-	if (PRIV(dev)->vcc) return 0;
+	if (PRIV(dev)->vcc) {
+		atm_dev_put(dev);
+		return 0;
+	}
 	kfree(dev_data);
 	atm_dev_put(dev);
 	atm_dev_deregister(dev);

drivers/net/bareudp.c

@@ -407,19 +407,34 @@ static int bareudp6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
 	return err;
 }
 
+static bool bareudp_proto_valid(struct bareudp_dev *bareudp, __be16 proto)
+{
+	if (bareudp->ethertype == proto)
+		return true;
+
+	if (!bareudp->multi_proto_mode)
+		return false;
+
+	if (bareudp->ethertype == htons(ETH_P_MPLS_UC) &&
+	    proto == htons(ETH_P_MPLS_MC))
+		return true;
+
+	if (bareudp->ethertype == htons(ETH_P_IP) &&
+	    proto == htons(ETH_P_IPV6))
+		return true;
+
+	return false;
+}
+
 static netdev_tx_t bareudp_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bareudp_dev *bareudp = netdev_priv(dev);
 	struct ip_tunnel_info *info = NULL;
 	int err;
 
-	if (skb->protocol != bareudp->ethertype) {
-		if (!bareudp->multi_proto_mode ||
-		    (skb->protocol !=  htons(ETH_P_MPLS_MC) &&
-		     skb->protocol !=  htons(ETH_P_IPV6))) {
-			err = -EINVAL;
-			goto tx_error;
-		}
+	if (!bareudp_proto_valid(bareudp, skb->protocol)) {
+		err = -EINVAL;
+		goto tx_error;
 	}
 
 	info = skb_tunnel_info(skb);

drivers/net/ethernet/cortina/gemini.c

@@ -2446,6 +2446,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 	port->reset = devm_reset_control_get_exclusive(dev, NULL);
 	if (IS_ERR(port->reset)) {
 		dev_err(dev, "no reset\n");
+		clk_disable_unprepare(port->pclk);
 		return PTR_ERR(port->reset);
 	}
 	reset_control_reset(port->reset);
@@ -2501,8 +2502,10 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 					IRQF_SHARED,
 					port_names[port->id],
 					port);
-	if (ret)
+	if (ret) {
+		clk_disable_unprepare(port->pclk);
 		return ret;
+	}
 
 	ret = register_netdev(netdev);
 	if (!ret) {

drivers/net/ethernet/hisilicon/hns3/hns3_enet.c

@@ -1093,16 +1093,8 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv,
 	int k, sizeoflast;
 	dma_addr_t dma;
 
-	if (type == DESC_TYPE_SKB) {
-		struct sk_buff *skb = (struct sk_buff *)priv;
-		int ret;
-
-		ret = hns3_fill_skb_desc(ring, skb, desc);
-		if (unlikely(ret < 0))
-			return ret;
-
-		dma = dma_map_single(dev, skb->data, size, DMA_TO_DEVICE);
-	} else if (type == DESC_TYPE_FRAGLIST_SKB) {
+	if (type == DESC_TYPE_FRAGLIST_SKB ||
+	    type == DESC_TYPE_SKB) {
 		struct sk_buff *skb = (struct sk_buff *)priv;
 
 		dma = dma_map_single(dev, skb->data, size, DMA_TO_DEVICE);
@@ -1439,6 +1431,10 @@ netdev_tx_t hns3_nic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 
 	next_to_use_head = ring->next_to_use;
 
+	ret = hns3_fill_skb_desc(ring, skb, &ring->desc[ring->next_to_use]);
+	if (unlikely(ret < 0))
+		goto fill_err;
+
 	ret = hns3_fill_skb_to_desc(ring, skb, DESC_TYPE_SKB);
 	if (unlikely(ret < 0))
 		goto fill_err;
@@ -4140,8 +4136,8 @@ static void hns3_link_status_change(struct hnae3_handle *handle, bool linkup)
 		return;
 
 	if (linkup) {
-		netif_carrier_on(netdev);
 		netif_tx_wake_all_queues(netdev);
+		netif_carrier_on(netdev);
 		if (netif_msg_link(handle))
 			netdev_info(netdev, "link up\n");
 	} else {

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c

@@ -5806,9 +5806,9 @@ static int hclge_add_fd_entry(struct hnae3_handle *handle,
 	/* to avoid rule conflict, when user configure rule by ethtool,
 	 * we need to clear all arfs rules
 	 */
+	spin_lock_bh(&hdev->fd_rule_lock);
 	hclge_clear_arfs_rules(handle);
 
-	spin_lock_bh(&hdev->fd_rule_lock);
 	ret = hclge_fd_config_rule(hdev, rule);
 
 	spin_unlock_bh(&hdev->fd_rule_lock);
@@ -5851,6 +5851,7 @@ static int hclge_del_fd_entry(struct hnae3_handle *handle,
 	return ret;
 }
 
+/* make sure being called after lock up with fd_rule_lock */
 static void hclge_del_all_fd_entries(struct hnae3_handle *handle,
 				     bool clear_list)
 {
@@ -5863,7 +5864,6 @@ static void hclge_del_all_fd_entries(struct hnae3_handle *handle,
 	if (!hnae3_dev_fd_supported(hdev))
 		return;
 
-	spin_lock_bh(&hdev->fd_rule_lock);
 	for_each_set_bit(location, hdev->fd_bmap,
 			 hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1])
 		hclge_fd_tcam_config(hdev, HCLGE_FD_STAGE_1, true, location,
@@ -5880,8 +5880,6 @@ static void hclge_del_all_fd_entries(struct hnae3_handle *handle,
 		bitmap_zero(hdev->fd_bmap,
 			    hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1]);
 	}
-
-	spin_unlock_bh(&hdev->fd_rule_lock);
 }
 
 static int hclge_restore_fd_entries(struct hnae3_handle *handle)
@@ -6263,7 +6261,7 @@ static int hclge_add_fd_entry_by_arfs(struct hnae3_handle *handle, u16 queue_id,
 				      u16 flow_id, struct flow_keys *fkeys)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
-	struct hclge_fd_rule_tuples new_tuples;
+	struct hclge_fd_rule_tuples new_tuples = {};
 	struct hclge_dev *hdev = vport->back;
 	struct hclge_fd_rule *rule;
 	u16 tmp_queue_id;
@@ -6273,19 +6271,17 @@ static int hclge_add_fd_entry_by_arfs(struct hnae3_handle *handle, u16 queue_id,
 	if (!hnae3_dev_fd_supported(hdev))
 		return -EOPNOTSUPP;
 
-	memset(&new_tuples, 0, sizeof(new_tuples));
-	hclge_fd_get_flow_tuples(fkeys, &new_tuples);
-
-	spin_lock_bh(&hdev->fd_rule_lock);
-
 	/* when there is already fd rule existed add by user,
 	 * arfs should not work
 	 */
+	spin_lock_bh(&hdev->fd_rule_lock);
 	if (hdev->fd_active_type == HCLGE_FD_EP_ACTIVE) {
 		spin_unlock_bh(&hdev->fd_rule_lock);
 		return -EOPNOTSUPP;
 	}
 
+	hclge_fd_get_flow_tuples(fkeys, &new_tuples);
+
 	/* check is there flow director filter existed for this flow,
 	 * if not, create a new filter for it;
 	 * if filter exist with different queue id, modify the filter;
@@ -6368,6 +6364,7 @@ static void hclge_rfs_filter_expire(struct hclge_dev *hdev)
 #endif
 }
 
+/* make sure being called after lock up with fd_rule_lock */
 static void hclge_clear_arfs_rules(struct hnae3_handle *handle)
 {
 #ifdef CONFIG_RFS_ACCEL
@@ -6420,10 +6417,14 @@ static void hclge_enable_fd(struct hnae3_handle *handle, bool enable)
 
 	hdev->fd_en = enable;
 	clear = hdev->fd_active_type == HCLGE_FD_ARFS_ACTIVE;
-	if (!enable)
+
+	if (!enable) {
+		spin_lock_bh(&hdev->fd_rule_lock);
 		hclge_del_all_fd_entries(handle, clear);
-	else
+		spin_unlock_bh(&hdev->fd_rule_lock);
+	} else {
 		hclge_restore_fd_entries(handle);
+	}
 }
 
 static void hclge_cfg_mac_mode(struct hclge_dev *hdev, bool enable)
@@ -6886,8 +6887,9 @@ static void hclge_ae_stop(struct hnae3_handle *handle)
 	int i;
 
 	set_bit(HCLGE_STATE_DOWN, &hdev->state);
-
+	spin_lock_bh(&hdev->fd_rule_lock);
 	hclge_clear_arfs_rules(handle);
+	spin_unlock_bh(&hdev->fd_rule_lock);
 
 	/* If it is not PF reset, the firmware will disable the MAC,
 	 * so it only need to stop phy here.
@@ -9040,11 +9042,12 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto,
 	bool writen_to_tbl = false;
 	int ret = 0;
 
-	/* When device is resetting, firmware is unable to handle
-	 * mailbox. Just record the vlan id, and remove it after
+	/* When device is resetting or reset failed, firmware is unable to
+	 * handle mailbox. Just record the vlan id, and remove it after
 	 * reset finished.
 	 */
-	if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+	if ((test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) ||
+	     test_bit(HCLGE_STATE_RST_FAIL, &hdev->state)) && is_kill) {
 		set_bit(vlan_id, vport->vlan_del_fail_bmap);
 		return -EBUSY;
 	}

drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c

@@ -1592,11 +1592,12 @@ static int hclgevf_set_vlan_filter(struct hnae3_handle *handle,
 	if (proto != htons(ETH_P_8021Q))
 		return -EPROTONOSUPPORT;
 
-	/* When device is resetting, firmware is unable to handle
-	 * mailbox. Just record the vlan id, and remove it after
+	/* When device is resetting or reset failed, firmware is unable to
+	 * handle mailbox. Just record the vlan id, and remove it after
 	 * reset finished.
 	 */
-	if (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+	if ((test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) ||
+	     test_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state)) && is_kill) {
 		set_bit(vlan_id, hdev->vlan_del_fail_bmap);
 		return -EBUSY;
 	}
@@ -3439,23 +3440,36 @@ void hclgevf_update_port_base_vlan_info(struct hclgevf_dev *hdev, u16 state,
 {
 	struct hnae3_handle *nic = &hdev->nic;
 	struct hclge_vf_to_pf_msg send_msg;
+	int ret;
 
 	rtnl_lock();
-	hclgevf_notify_client(hdev, HNAE3_DOWN_CLIENT);
-	rtnl_unlock();
+
+	if (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) ||
+	    test_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state)) {
+		dev_warn(&hdev->pdev->dev,
+			 "is resetting when updating port based vlan info\n");
+		rtnl_unlock();
+		return;
+	}
+
+	ret = hclgevf_notify_client(hdev, HNAE3_DOWN_CLIENT);
+	if (ret) {
+		rtnl_unlock();
+		return;
+	}
 
 	/* send msg to PF and wait update port based vlan info */
 	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_VLAN,
 			       HCLGE_MBX_PORT_BASE_VLAN_CFG);
 	memcpy(send_msg.data, port_base_vlan_info, data_size);
-	hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
-
-	if (state == HNAE3_PORT_BASE_VLAN_DISABLE)
-		nic->port_base_vlan_state = HNAE3_PORT_BASE_VLAN_DISABLE;
-	else
-		nic->port_base_vlan_state = HNAE3_PORT_BASE_VLAN_ENABLE;
+	ret = hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
+	if (!ret) {
+		if (state == HNAE3_PORT_BASE_VLAN_DISABLE)
+			nic->port_base_vlan_state = state;
+		else
+			nic->port_base_vlan_state = HNAE3_PORT_BASE_VLAN_ENABLE;
+	}
 
-	rtnl_lock();
 	hclgevf_notify_client(hdev, HNAE3_UP_CLIENT);
 	rtnl_unlock();
 }

drivers/net/ethernet/ibm/ibmvnic.c

@@ -3206,7 +3206,7 @@ static int init_sub_crq_irqs(struct ibmvnic_adapter *adapter)
 req_tx_irq_failed:
 	for (j = 0; j < i; j++) {
 		free_irq(adapter->tx_scrq[j]->irq, adapter->tx_scrq[j]);
-		irq_dispose_mapping(adapter->rx_scrq[j]->irq);
+		irq_dispose_mapping(adapter->tx_scrq[j]->irq);
 	}
 	release_sub_crqs(adapter, 1);
 	return rc;

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -301,10 +301,8 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 	 */
 	hw->dev_spec.ich8lan.ulp_state = e1000_ulp_state_unknown;
 	ret_val = e1000_disable_ulp_lpt_lp(hw, true);
-	if (ret_val) {
+	if (ret_val)
 		e_warn("Failed to disable ULP\n");
-		goto out;
-	}
 
 	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val) {

drivers/net/ethernet/intel/igb/igb_main.c

@@ -6224,9 +6224,18 @@ static void igb_reset_task(struct work_struct *work)
 	struct igb_adapter *adapter;
 	adapter = container_of(work, struct igb_adapter, reset_task);
 
+	rtnl_lock();
+	/* If we're already down or resetting, just bail */
+	if (test_bit(__IGB_DOWN, &adapter->state) ||
+	    test_bit(__IGB_RESETTING, &adapter->state)) {
+		rtnl_unlock();
+		return;
+	}
+
 	igb_dump(adapter);
 	netdev_err(adapter->netdev, "Reset adapter\n");
 	igb_reinit_locked(adapter);
+	rtnl_unlock();
 }
 
 /**

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c

@@ -1730,10 +1730,12 @@ static void otx2_reset_task(struct work_struct *work)
 	if (!netif_running(pf->netdev))
 		return;
 
+	rtnl_lock();
 	otx2_stop(pf->netdev);
 	pf->reset_count++;
 	otx2_open(pf->netdev);
 	netif_trans_update(pf->netdev);
+	rtnl_unlock();
 }
 
 static const struct net_device_ops otx2_netdev_ops = {
@@ -2111,6 +2113,7 @@ static void otx2_remove(struct pci_dev *pdev)
 
 	pf = netdev_priv(netdev);
 
+	cancel_work_sync(&pf->reset_task);
 	/* Disable link notifications */
 	otx2_cgx_config_linkevents(pf, false);