3D button with hacklab logo in it. Made this a while back, may as wel…

…l put it online.

button.scad

@@ -0,0 +1,51 @@
+//cylinder(h=5,r=20,$fn=80);
+
+difference(){
+union(){
+	cylinder(r=20,h=4);
+	difference(){
+		translate([0,0,-1.3]) rotate([0,90,0])cylinder(r=3.5,h=20,center=true,$fn=15);	
+		translate([0,0,-1.3]) rotate([0,90,0])cylinder(r=3.8,h=6,center=true,$fn=15);	
+	}
+}
+
+//translate([0,0,-1.3]) rotate([0,90,0])cylinder(r=1.0,h=22,center=true,$fn=15);	
+
+translate([2.6,3.5,2]) scale([0.48,0.48,0.48]) linear_extrude(height=5) union(){
+
+	//middle cross
+	translate([0,-1,0]) rotate([0,0,-10]) scale([7,2.2,1]) circle(r=1,$fn=20,center=trure);
+
+	//midle triangle
+	scale([0.7,1,1]){
+		rotate([0,0,40]) scale([8,1.8,1]) translate([1,0,0]) circle(r=1,$fn=20,center=true);
+		rotate([0,0,-180-40]) scale([8,1.8,1]) translate([1,0,0]) circle(r=1,$fn=20,center=true);
+		translate([0,8*sqrt(2)-1,0]) scale([8*sqrt(2)+1,1.8,1]) circle(r=1,$fn=20,center=true);
+	}
+
+	//hat
+	translate([0,8*sqrt(2)+7,0]) scale([1.7,12,1]) circle(r=1,$fn=20);
+	translate([0,8*sqrt(2)+9,0]) scale([6,2.2,1]) difference(){
+		circle(r=1,$fn=20);
+		circle(r=0.5,$fn=20);
+	}
+
+	//bottom triangle
+	translate([0,-3,0]) rotate([0,0,5]) scale([1.9,17,1]) translate([0,-1,0]) circle(r=1,$fn=20);
+	translate([0,-3,0]) rotate([0,0,-20]) scale([1.9,21,1]) translate([0,-1,0]) circle(r=1,$fn=20);
+	translate([-8.5,-38,0]) rotate([0,0,15.4]) scale([13,1.9,1]) translate([0,-1,0]) circle(r=1,$fn=20);
+
+	//arrows
+	translate([-12.5,-13,0]) scale([0.75,0.75,0.75]) rotate([0,0,-45])  union(){
+		scale([2,8,1]) translate([0,1,0]) circle(r=1,$fn=20);
+		rotate([0,0,28])  scale([2,3.5,1]) translate([0,1,0]) circle(r=1,$fn=20);
+		rotate([0,0,-28])  scale([2,3.5,1]) translate([0,1,0]) circle(r=1,$fn=20);
+	}
+	translate([-20,-10,0]) scale([0.75,0.75,0.75]) rotate([0,0,-45])  union(){
+		scale([2,8,1]) translate([0,1,0]) circle(r=1,$fn=20);
+		rotate([0,0,28])  scale([2,3.5,1]) translate([0,1,0]) circle(r=1,$fn=20);
+		rotate([0,0,-28])  scale([2,3.5,1]) translate([0,1,0]) circle(r=1,$fn=20);
+	}
+
+}
+}