This library is made to manage and calculate the liquid flow sensor.
The flow rate is calculated by counting the pulses of the rotating body, and using the formula and geometry factor to deduce the rate of flow.
The lib_flo_cmd is used to recieve cmds from the parser or any caller library and return the required output, To read sensor data, use flo_read command, you can use calibrate cmds flo_cal_factor to calibrate the sensor at runtime and use flo_cal_clear to restore the default calibration, also you can get the calibration status using flo_cal_get it should return 1 if all calibrated, lastly flo_reset resets all the device params back to default.
Notice: MAGIC_NUMBER_DEFAULT is used for data integrity check.
Copy lib_flo_config.template.h to lib_flo_config.h and implement the required functions, use INTERRUPT to increment the pulses_counter on each interupt from the sensor.
GNU General Public License v3.0
Copyright (C) 2020 Conative Labs