A flex PCB business card that also works as a Solo
Ref | value | type | package | quantity | Required? |
---|---|---|---|---|---|
C1-C9,C11 | 4.7u | capacitor | 0402 | 10 | yes |
C10,C12 | * xx, yy | C0G capacitor | 0402 | 10 | yes |
ST1 | STM32L432KU | Microcontroller | QFN32 | 1 | yes |
N1 | AS3956-ATDM-S4 | NFC IC (SPI version) | MLPD 3x3 | 1 | yes |
R1 | 500R | resistor | 0402 | 1 | no |
L1 | CL-505S-X-SD-T | RGB LED | 0606 | 1 | no |
* C10 and C12 are tunning capacitors connected in parallel. I have not yet measured what the nominal value for them should be, but will be somewhere around 45pF.
Assemble BOM on badge.
Connect programmer to debug port. Connector uses the following cable.
http://www.tag-connect.com/TC2030-CTX-NL
Connect cable to an ARM debugger/programmer. And program one of the "bundle" builds from the latest Solo release.