soc/intel/jasperlake: Add Jasper Lake SoC support

This is a copy patch from Tiger Lake SoC code.

The only changes done on top of copy is changing below configs:
1. SOC_INTEL_TIGERLAKE -> SOC_INTEL_TIGERLAKE_COPY
2. SOC_INTEL_JASPERLAKE -> SOC_INTEL_JASPERLAKE_COPY
3. SOC_INTEL_TIGERLAKE_BASE -> SOC_INTEL_TIGERLAKE_BASE_COPY

We started with initial assumption that JSL and TGL can co-exist.
But now we see the SoC code in Tiger Lake is relying on too many
compile-time directives to make two SoCs co-exist. Some of the
differences are listed below:

-> Kconfig: Multiple Kconfig options using
   if SOC_INTEL_{TIGERLAKE/JASPERLAKE}

-> GPIO: GPIO communities have their own differences.
   This requires conditional checks in gpio.asl, gpio.c, gpio*.h,
   pmc.h and gpio.asl

-> PCI IRQs: Set up differently for JSL and TGL

-> PCIe: Number of Root ports differ.

-> eMMC/SD: Only supported on JSL.

-> USB: Number of USB port are different for JSL and TGL.

-> Memory configuration parameters are different for JSL and TGL.

-> FSP parameters for JSL and TGL are different.

The split of JSL and TGL SoC code is planned as below:

1. Copy Tiger Lake SoC code as is, and change SoC Kconfig
   to avoid conflicts with current mainboard builds.

2. Clean up TGL code out of copy patch done in step 1.
   Make it JSL only code. The SoC config still kept as
   SOC_INTEL_JASPERLAKE_COPY.

3. Change JSL SOC Kconfig from SOC_INTEL_JASPERLAKE_COPY to
   SOC_INTEL_JASPERLAKE, dedede and jasperlake_rvp boards can
   bind to SoC code from soc/intel/jasperlake. This step establishes
   Jasper Lake as a separate SoC.

4. Clean up current JSL code from TGL code. This step establishes
   Tiger Lake as a separate SoC.

BUG=b:150217037

Change-Id: I9c33f478a2f8ed5e2d8e7815821d13044d35d388
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>

src/soc/intel/jasperlake/Kconfig

@@ -0,0 +1,232 @@
+config SOC_INTEL_TIGERLAKE_BASE_COPY
+	bool
+
+config SOC_INTEL_TIGERLAKE_COPY
+	bool
+	select SOC_INTEL_TIGERLAKE_BASE_COPY
+	#TODO - Enable INTEL_CAR_NEM_ENHANCED
+	select INTEL_CAR_NEM
+	help
+	  Intel Tigerlake support
+
+config SOC_INTEL_JASPERLAKE_COPY
+	bool
+	select SOC_INTEL_TIGERLAKE_BASE_COPY
+	select INTEL_CAR_NEM
+	help
+	  Intel Jasperlake support
+
+if SOC_INTEL_TIGERLAKE_BASE_COPY
+
+config CPU_SPECIFIC_OPTIONS
+	def_bool y
+	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
+	select ARCH_BOOTBLOCK_X86_32
+	select ARCH_RAMSTAGE_X86_32
+	select ARCH_ROMSTAGE_X86_32
+	select ARCH_VERSTAGE_X86_32
+	select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH
+	select BOOT_DEVICE_SUPPORTS_WRITES
+	select CACHE_MRC_SETTINGS
+	select COMMON_FADT
+	select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
+	select FSP_M_XIP
+	select GENERIC_GPIO_LIB
+	select HAVE_FSP_GOP
+	select INTEL_DESCRIPTOR_MODE_CAPABLE
+	select HAVE_SMI_HANDLER
+	select IDT_IN_EVERY_STAGE
+	select INTEL_GMA_ACPI
+	select INTEL_GMA_ADD_VBT if RUN_FSP_GOP
+	select IOAPIC
+	select MRC_SETTINGS_PROTECT
+	select PARALLEL_MP
+	select PARALLEL_MP_AP_WORK
+	select MICROCODE_BLOB_UNDISCLOSED
+	select PLATFORM_USES_FSP2_1
+	select REG_SCRIPT
+	select SMP
+	select SOC_AHCI_PORT_IMPLEMENTED_INVERT
+	select PMC_GLOBAL_RESET_ENABLE_LOCK
+	select CPU_INTEL_COMMON_SMM
+	select SOC_INTEL_COMMON
+	select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE
+	select SOC_INTEL_COMMON_BLOCK
+	select SOC_INTEL_COMMON_BLOCK_ACPI
+	select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG
+	select SOC_INTEL_COMMON_BLOCK_CPU
+	select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
+	select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT
+	select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2
+	select SOC_INTEL_COMMON_BLOCK_HDA
+	select SOC_INTEL_COMMON_BLOCK_SA
+	select SOC_INTEL_COMMON_BLOCK_SMM
+	select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
+	select SOC_INTEL_COMMON_PCH_BASE
+	select SOC_INTEL_COMMON_RESET
+	select SOC_INTEL_COMMON_BLOCK_CAR
+	select SSE2
+	select SUPPORT_CPU_UCODE_IN_CBFS
+	select TSC_MONOTONIC_TIMER
+	select UDELAY_TSC
+	select UDK_2017_BINDING
+	select DISPLAY_FSP_VERSION_INFO
+	select HECI_DISABLE_USING_SMM
+
+config DCACHE_RAM_BASE
+	default 0xfef00000
+
+config DCACHE_RAM_SIZE
+	default 0x80000
+	help
+	  The size of the cache-as-ram region required during bootblock
+	  and/or romstage.
+
+config DCACHE_BSP_STACK_SIZE
+	hex
+	default 0x40400 if SOC_INTEL_TIGERLAKE_COPY
+	default 0x30400 if SOC_INTEL_JASPERLAKE_COPY
+	help
+	  The amount of anticipated stack usage in CAR by bootblock and
+	  other stages. In the case of FSP_USES_CB_STACK default value will be
+	  sum of FSP-M stack requirement (256KiB for TGL, 192KiB for JSL) and CB romstage
+	  stack requirement (~1KiB).
+
+config FSP_TEMP_RAM_SIZE
+	hex
+	default 0x20000
+	help
+	  The amount of anticipated heap usage in CAR by FSP.
+	  Refer to Platform FSP integration guide document to know
+	  the exact FSP requirement for Heap setup.
+
+config IFD_CHIPSET
+	string
+	default "jsl" if SOC_INTEL_JASPERLAKE_COPY
+	default "tgl" if SOC_INTEL_TIGERLAKE_COPY
+
+config IED_REGION_SIZE
+	hex
+	default 0x400000
+
+config HEAP_SIZE
+	hex
+	default 0x8000
+
+config MAX_ROOT_PORTS
+	int
+	default 8 if SOC_INTEL_JASPERLAKE_COPY
+	default 12 if SOC_INTEL_TIGERLAKE_COPY
+
+config MAX_PCIE_CLOCKS
+	int
+	default 7 if SOC_INTEL_TIGERLAKE_COPY
+	default 6 if SOC_INTEL_JASPERLAKE_COPY
+
+config SMM_TSEG_SIZE
+	hex
+	default 0x800000
+
+config SMM_RESERVED_SIZE
+	hex
+	default 0x200000
+
+config PCR_BASE_ADDRESS
+	hex
+	default 0xfd000000
+	help
+	  This option allows you to select MMIO Base Address of sideband bus.
+
+config MMCONF_BASE_ADDRESS
+	hex
+	default 0xc0000000
+
+config CPU_BCLK_MHZ
+	int
+	default 100
+
+config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
+	int
+	default 120
+
+config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
+	int
+	default 133
+
+config SOC_INTEL_COMMON_BLOCK_GSPI_MAX
+	int
+	default 3 if SOC_INTEL_JASPERLAKE_COPY
+	default 4 if SOC_INTEL_TIGERLAKE_COPY
+
+config SOC_INTEL_I2C_DEV_MAX
+	int
+	default 6
+
+config SOC_INTEL_UART_DEV_MAX
+	int
+	default 3
+
+config CONSOLE_UART_BASE_ADDRESS
+	hex
+	default 0xfe032000
+	depends on INTEL_LPSS_UART_FOR_CONSOLE
+
+# Clock divider parameters for 115200 baud rate
+# Baudrate = (UART source clcok * M) /(N *16)
+# TGL UART source clock: 120MHz
+# JSL UART source clock: 100MHz
+config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL
+	hex
+	default 0x30 if SOC_INTEL_JASPERLAKE_COPY
+	default 0x25a if SOC_INTEL_TIGERLAKE_COPY
+
+config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL
+	hex
+	default 0xc35 if SOC_INTEL_JASPERLAKE_COPY
+	default 0x7fff if SOC_INTEL_TIGERLAKE_COPY
+
+config CHROMEOS
+	select CHROMEOS_RAMOOPS_DYNAMIC
+
+config VBOOT
+	select VBOOT_SEPARATE_VERSTAGE
+	select VBOOT_MUST_REQUEST_DISPLAY
+	select VBOOT_STARTS_IN_BOOTBLOCK
+	select VBOOT_VBNV_CMOS
+	select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH
+
+config C_ENV_BOOTBLOCK_SIZE
+	hex
+	default 0xC000
+
+config CBFS_SIZE
+	hex
+	default 0x200000
+
+config FSP_HEADER_PATH
+	string "Location of FSP headers"
+	default "src/vendorcode/intel/fsp/fsp2_0/jasperlake/" if SOC_INTEL_JASPERLAKE_COPY
+	default "src/vendorcode/intel/fsp/fsp2_0/tigerlake/" if SOC_INTEL_TIGERLAKE_COPY
+
+config FSP_FD_PATH
+	string
+	depends on FSP_USE_REPO
+	default "3rdparty/fsp/JasperLakeFspBinPkg/Fsp.fd" if SOC_INTEL_JASPERLAKE_COPY
+	default "3rdparty/fsp/TigerLakeFspBinPkg/Fsp.fd" if SOC_INTEL_TIGERLAKE_COPY
+
+config SOC_INTEL_TIGERLAKE_COPY_DEBUG_CONSENT
+	int "Debug Consent for TGL"
+	# USB DBC is more common for developers so make this default to 3 if
+	# SOC_INTEL_DEBUG_CONSENT=y
+	default 3 if SOC_INTEL_DEBUG_CONSENT
+	default 0
+	help
+	  This is to control debug interface on SOC.
+	  Setting non-zero value will allow to use DBC or DCI to debug SOC.
+	  PlatformDebugConsent in FspmUpd.h has the details.
+
+	  Desired platform debug type are
+	  0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB),
+	  3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC),
+	  6:Enable (2-wire DCI OOB), 7:Manual
+endif

src/soc/intel/jasperlake/Makefile.inc

@@ -0,0 +1,66 @@
+ifeq ($(CONFIG_SOC_INTEL_TIGERLAKE_BASE_COPY),y)
+
+subdirs-y += romstage
+subdirs-y += ../../../cpu/intel/microcode
+subdirs-y += ../../../cpu/intel/turbo
+subdirs-y += ../../../cpu/x86/lapic
+subdirs-y += ../../../cpu/x86/mtrr
+subdirs-y += ../../../cpu/x86/smm
+subdirs-y += ../../../cpu/x86/tsc
+
+# all (bootblock, verstage, romstage, postcar, ramstage)
+all-y += gspi.c
+all-y += i2c.c
+all-y += pmutil.c
+all-y += spi.c
+all-y += uart.c
+
+bootblock-y += bootblock/bootblock.c
+bootblock-y += bootblock/cpu.c
+bootblock-y += bootblock/pch.c
+bootblock-y += bootblock/report_platform.c
+bootblock-y += espi.c
+bootblock-$(CONFIG_SOC_INTEL_TIGERLAKE_COPY) += gpio_tgl.c
+bootblock-$(CONFIG_SOC_INTEL_JASPERLAKE_COPY) += gpio_jsl.c
+bootblock-y += p2sb.c
+
+romstage-y += espi.c
+romstage-$(CONFIG_SOC_INTEL_TIGERLAKE_COPY) += meminit_tgl.c
+romstage-$(CONFIG_SOC_INTEL_JASPERLAKE_COPY) += meminit_jsl.c
+romstage-$(CONFIG_SOC_INTEL_TIGERLAKE_COPY) += gpio_tgl.c
+romstage-$(CONFIG_SOC_INTEL_JASPERLAKE_COPY) += gpio_jsl.c
+romstage-y += reset.c
+
+ramstage-y += acpi.c
+ramstage-y += chip.c
+ramstage-y += cpu.c
+ramstage-y += elog.c
+ramstage-y += espi.c
+ramstage-y += finalize.c
+ramstage-$(CONFIG_SOC_INTEL_TIGERLAKE_COPY) += fsp_params_tgl.c
+ramstage-$(CONFIG_SOC_INTEL_JASPERLAKE_COPY) += fsp_params_jsl.c
+ramstage-$(CONFIG_SOC_INTEL_TIGERLAKE_COPY) += gpio_tgl.c
+ramstage-$(CONFIG_SOC_INTEL_JASPERLAKE_COPY) += gpio_jsl.c
+ramstage-y += graphics.c
+ramstage-y += lockdown.c
+ramstage-y += p2sb.c
+ramstage-y += pmc.c
+ramstage-y += reset.c
+ramstage-y += smmrelocate.c
+ramstage-y += systemagent.c
+ramstage-y += sd.c
+
+smm-$(CONFIG_SOC_INTEL_TIGERLAKE_COPY) += gpio_tgl.c
+smm-$(CONFIG_SOC_INTEL_JASPERLAKE_COPY) += gpio_jsl.c
+smm-y += p2sb.c
+smm-y += pmc.c
+smm-y += pmutil.c
+smm-y += smihandler.c
+smm-y += uart.c
+
+verstage-$(CONFIG_SOC_INTEL_TIGERLAKE_COPY) += gpio_tgl.c
+
+CPPFLAGS_common += -I$(src)/soc/intel/tigerlake
+CPPFLAGS_common += -I$(src)/soc/intel/tigerlake/include
+
+endif