This repo is for review of requests for signing shim. To create a request for review:
- clone this repo
- edit the template below
- add the shim.efi to be signed
- add build logs
- add any additional binaries/certificates/SHA256 hashes that may be needed
- commit all of that
- tag it with a tag of the form "myorg-shim-arch-YYYYMMDD"
- push that to github
- file an issue at https://github.com/rhboot/shim-review/issues with a link to your tag
- approval is ready when the "accepted" label is added to your issue
Note that we really only have experience with using GRUB2 on Linux, so asking us to endorse anything else for signing is going to require some convincing on your part.
Here's the template:
CIQ Inc. ( https://ciq.com )
CIQ provides enhancements to, and customizations around Rocky Linux for our customers. We are especially interested in customized/improved Linux kernel builds, along with packaging and improving the out-of-tree driver experience.
What's the justification that this really does need to be signed for the whole world to be able to boot it?
Our customers use a variety of hardware platforms. Many of them have policies in place, or are contractually obligated in some way to use the default EFI firmware with no customized secureboot/MOK key injection. At the same time, many customers require some modification from the stock Rocky / RHEL kernel, mostly around the area of security backports (supporting older minor versions), or customized options for their workload.
We need these customized kernels to boot properly on stock hardware. This is not possible with the default Rocky Linux (or RHEL) shim binary.
The security contacts need to be verified before the shim can be accepted. For subsequent requests, contact verification is only necessary if the security contacts or their PGP keys have changed since the last successful verification.
An authorized reviewer will initiate contact verification by sending each security contact a PGP-encrypted email containing random words.
You will be asked to post the contents of these mails in your shim-review issue to prove ownership of the email addresses and PGP keys.
- Name: Jason Rodriguez
- Position: Engineer
- Email address: jrodriguez@ciq.com
- PGP key fingerprint: 0310 CFD4 0447 4D14 5072 D3E1 EAFF ECB3 C3AB C924
- PGP key available on keys.openpgp.org
- https://keys.openpgp.org/vks/v1/by-fingerprint/0310CFD404474D145072D3E1EAFFECB3C3ABC924
(Key should be signed by the other security contacts, pushed to a keyserver like keyserver.ubuntu.com, and preferably have signatures that are reasonably well known in the Linux community.)
- Name: Michael Young
- Position: Information Technology Director
- Email address: myoung@ciq.com
- PGP key fingerprint: CD82 9808 7BCA C022 B5EC 84FA D84A 6A59 1392 6D2B
- http://keyserver.ubuntu.com/pks/lookup?op=get&search=0xcd8298087bcac022b5ec84fad84a6a5913926d2b
(Key should be signed by the other security contacts, pushed to a keyserver like keyserver.ubuntu.com, and preferably have signatures that are reasonably well known in the Linux community.)
Please create your shim binaries starting with the 15.7 shim release tar file: https://github.com/rhboot/shim/releases/download/15.7/shim-15.7.tar.bz2
This matches https://github.com/rhboot/shim/releases/tag/15.7 (plus the NX patch) and contains the appropriate gnu-efi source.
Yes. We are adding the relevant enable-NX-by-default patch to this code: rhboot/shim#530
Same patch in our RPM source: https://bitbucket.org/ciqinc/shim-unsigned-x64/src/ciq8/SOURCES/0001-Enable-the-NX-compatibility-flag-by-default.patch
CIQ shim-unsigned-x64 RPM repository: https://bitbucket.org/ciqinc/shim-unsigned-x64/src/ciq8/
This code is a combination of: https://github.com/rhboot/shim/releases/download/15.7/shim-15.7.tar.bz2 , NX patch rhboot/shim#530 , and an RPM spec file derived from the Rocky (and in turn RHEL) one.
Additionally, I have a "frozen" repository copy of the Mock buildroot and build dependencies (gcc, openssl, et al.) here: https://rl-secure-boot.ewr1.vultrobjects.com/repos/shim_review_deps/ (this gets used by Mock as a source of RPM dependencies)
Using this repository (consisting of public Rocky Linux 8 packages) ensures a reproducible binary when building the shim-unsigned-x64 with mock (or Docker/Podman) and rpmbuild.
We are including the NX-compatibility-by default patch, in addition to the stock 15.7 tag:
This is to align with updated Microsoft requirements, ( https://techcommunity.microsoft.com/t5/hardware-dev-center/updated-uefi-signing-requirements/ba-p/1062916 )
If shim is loading GRUB2 bootloader what exact implementation of Secureboot in GRUB2 do you have? (Either Upstream GRUB2 shim_lock verifier or Downstream RHEL/Fedora/Debian/Canonical-like implementation)
We intend to use the Rocky 8 + 9 (based on RHEL 8 + 9) GRUB2 source code unmodified, as our projects have no need for bootloader modifications. The Rocky/RHEL Grub versions (and their patches) are what we are using.
If shim is loading GRUB2 bootloader and your previously released shim booted a version of grub affected by any of the CVEs in the July 2020 grub2 CVE list, the March 2021 grub2 CVE list, the June 7th 2022 grub2 CVE list, or the November 15th 2022 list, have fixes for all these CVEs been applied?
-
CVE-2020-14372
-
CVE-2020-25632
-
CVE-2020-25647
-
CVE-2020-27749
-
CVE-2020-27779
-
CVE-2021-20225
-
CVE-2021-20233
-
CVE-2020-10713
-
CVE-2020-14308
-
CVE-2020-14309
-
CVE-2020-14310
-
CVE-2020-14311
-
CVE-2020-15705
-
CVE-2021-3418 (if you are shipping the shim_lock module)
-
CVE-2021-3695
-
CVE-2021-3696
-
CVE-2021-3697
-
CVE-2022-28733
-
CVE-2022-28734
-
CVE-2022-28735
-
CVE-2022-28736
-
CVE-2022-28737
-
CVE-2022-2601
-
CVE-2022-3775
We are a new vendor, and this is our first submission. But I can confirm that our grub2 builds will not be affected by any of those, as they've all been fixed in our upstream:
https://git.rockylinux.org/staging/rpms/grub2/-/blob/r9/SPECS/grub2.spec#L536
https://git.rockylinux.org/staging/rpms/grub2/-/blob/r8/SPECS/grub2.spec#L511
We have not, as we are a new vendor. Our release should exactly match the Rocky and RHEL equivalents.
This is our first submission, we have no older shims.
Is upstream commit 1957a85b0032a81e6482ca4aab883643b8dae06e "efi: Restrict efivar_ssdt_load when the kernel is locked down" applied?
Is upstream commit 75b0cea7bf307f362057cc778efe89af4c615354 "ACPI: configfs: Disallow loading ACPI tables when locked down" applied?
Is upstream commit eadb2f47a3ced5c64b23b90fd2a3463f63726066 "lockdown: also lock down previous kgdb use" applied?
Yes, all of these patches are already in the Rocky/RHEL 8 + 9 kernels we plan to base on.
Generally we'll be performing 2 sorts of mofifications:
-
Fixes and enhancements (especially security updates) to continue long-term support of a previous Rocky Linux release. For example, further backports to the Rocky/RHEL 8.6 kernel (kernel-4.18.0-372) to keep it updated for customers, or FIPS enhancements/restrictions for those that require compliance.
-
Builds of recent mainline (ML) and longterm (LT) upstream kernel releases designed for installation on Rocky Linux. Different variants are planned with compile-time configuration tweaks, especially around enhancing high performance computing (HPC) applications.
If you use vendor_db functionality of providing multiple certificates and/or hashes please briefly describe your certificate setup.
If there are allow-listed hashes please provide exact binaries for which hashes are created via file sharing service, available in public with anonymous access for verification.
We aren't using vendor_db functionality at this time.
If you are re-using a previously used (CA) certificate, you will need to add the hashes of the previous GRUB2 binaries exposed to the CVEs to vendor_dbx in shim in order to prevent GRUB2 from being able to chainload those older GRUB2 binaries. If you are changing to a new (CA) certificate, this does not apply.
Our CA and shim are new.
What OS and toolchain must we use to reproduce this build? Include where to find it, etc. We're going to try to reproduce your build as closely as possible to verify that it's really a build of the source tree you tell us it is, so these need to be fairly thorough. At the very least include the specific versions of gcc, binutils, and gnu-efi which were used, and where to find those binaries.
If the shim binaries can't be reproduced using the provided Dockerfile, please explain why that's the case and what the differences would be.
This build is all Rocky 8.8 dependencies, using rpmbuild.
To ensure reproducibility, I have "frozen" all the dependent Rocky 8 packages needed and put them in their own repository. It can be found in the builder's Dockerfile.
Using a tagged container base plus this repository should ensure binaries are 100% reproducible.
Current reproducible shim build location: https://bitbucket.org/ciqinc/ciq-shim-build
This should include logs for creating the buildroots, applying patches, doing the build, creating the archives, etc.
shim_rpmbuild.log contains a log of the docker build run. This includes dependency install, compilation, hash comparison, etc.
N/A
SHA256 (shimx64.efi) = 7f739b33cd666685cdba46a9b16265d12b73e73c41838a76be4d01f342b5831b
- Private key for CA is kept in offline vault by default
- Private keys for child certificates stored on HSM in a FIPS-140-2 environment for signing
- Private keys are not exportable from HSM by design
- Key backups are also kept in secure offline vault
No, only the CIQ secureboot CA (PKI) is embedded in our Shim
Do you add a vendor-specific SBAT entry to the SBAT section in each binary that supports SBAT metadata ( grub2, fwupd, fwupdate, shim + all child shim binaries )?
Please provide exact SBAT entries for all SBAT binaries you are booting or planning to boot directly through shim.
Where your code is only slightly modified from an upstream vendor's, please also preserve their SBAT entries to simplify revocation.
Besides being signed with our keys, We intend to leave our grub2 and fwupd source code completely unchanged from the upstream Rocky (RHEL) versions, as we have no need to customize it beyond that.
Rocky 8 / Grub 2.02-148 :
efinet lsefi lsefimmap connectefi
all_video boot blscfg btrfs
cat configfile cryptodisk echo
ext2 fat font gcry_rijndael
gcry_rsa gcry_serpent gcry_sha256 gcry_twofish
gcry_whirlpool gfxmenu gfxterm gzio
halt hfsplus http increment
iso9660 jpeg loadenv loopback
linux lvm luks mdraid09
mdraid1x minicmd net normal
part_apple part_msdos part_gpt password_pbkdf2
png reboot regexp search
search_fs_uuid search_fs_file search_label serial
sleep syslinuxcfg test tftp
video xfs efi_netfs efifwsetup
backtrace chain usb usbserial_common
usbserial_pl2303 usbserial_ftdi usbserial_usbdebug keylayouts
at_keyboard
Rocky 9 / Grub 2.06-61 :
efinet lsefi lsefimmap connectefi
backtrace chain all_video boot
blscfg btrfs cat configfile
cryptodisk echo ext2 fat
font gcry_rijndael gcry_rsa gcry_serpent gcry_sha256
gcry_twofish gcry_whirlpool gfxmenu gfxterm
gzio halt hfsplus http
increment iso9660 jpeg loadenv
loopback linux lvm luks
mdraid09 mdraid1x minicmd net
normal part_apple part_msdos part_gpt
password_pbkdf2 png reboot regexp
search search_fs_uuid search_fs_file search_label serial
sleep syslinuxcfg test tftp
video xfs efi_netfs efifwsetup
usb usbserial_common usbserial_pl2303 usbserial_ftdi
usbserial_usbdebug keylayouts at_keyboard
Rocky / RHEL 8 base:
- grub2-2.02 base version
- grub2-2.02-148.1 (current version)
(We plan to track security updates from upstream when building Grub)
We have successfully packaged and tested a RockyLinux version of certwrapper (formerly certmule). That is, a certmule package signed by us, but containing the Rocky Linux CA.
This seems perfect for our use-case, as the Rocky grub2 + fwupd upstream packages could be used as-is without the need for recompilation or re-signing. While keenly interested in kernel modifications, we don't have as much cause to update fwupd or grub2, and would prefer to use our upstream whenever feasible.
I want to inquire about signing this wrapper efi and making it available to users.
The certmule package in question (with the embedded Rocky CA) is located at: https://bitbucket.org/ciqinc/certmule-rocky/
If your GRUB2 launches any other binaries that are not the Linux kernel in SecureBoot mode, please provide further details on what is launched and how it enforces Secureboot lockdown.
No, Linux kernel launches are all we are interested in.
In the case of the kernel, both the RHEL variant and the upstream ("new") variants prevent this by default, and we do not want to change that.
In the case of Grub + Fwupd, we will be running the same Rocky/RHEL versions unmodified, which also do not execute unauthenticated code by default.
Grub2 will only load unsigned code if the secureboot feature is turned off load unsigned kernels, but only with secureboot mode turned off on an end-user's system.
We are using our RHEL upstream variants: 4.18 and 5.14 with minor patches (on top of the many patches from Red Hat and others).
We are also building and packaging supported upstream kernels designed for use on Rocky and enterprise-Linux variants. These include supported LT versions (5.4, 5.10, 5.15, 6.1), as well as the rollling latest-stable version.
I understand that these all enforce secure boot "out of the box".
No extra info, just some questions about using certwrapper/certmule to trust upstream distro components. (I like the "mule" name better ;-) ) Can't find this being used or approved in other reviews, but it's very interesting. We're maintaining the beginnings of an RPM, and it's definitely something that should find its way into distros!