Update README.md

cuav · Jun 13, 2018 · 7a80014 · 7a80014
1 parent 793566a
commit 7a80014
Showing 1 changed file with 7 additions and 3 deletions.
diff --git a/PixHack_v5/README.md b/PixHack_v5/README.md
@@ -1,12 +1,17 @@
-The PixHack V5 is based on the FMUv5 designed flight control controller hardware, designed, produced and sold by CUAV. The hardware design file is completely open by CUAV and And abide by the CC-BY-SA 3.0 protocol.
+The PixHack V5 is based on the FMUv5 designed flight control controller hardware.
+The main design of the PixHack V5 hardware is performed by CUAV and produced by CUAV.
+The hardware design file is completely open by CUAV and And abide by the CC-BY-SA 3.0 protocol.
+The PixHack V5 design document cites many design files or reference files and related libraries from these organizations or companies.
+Including PX4\PIXHAWK\3DR\Proficnc\ST\Altium\TDK\Hirose\Hrs\PANASONIC\molex\TI\  and other organizations or companies.Some design reference copyrights should belong to them.
+Thanks for their contributions to open source hardware. If there is any infringement, please contact us for deletion and modification.
 
 The V5 flight controller has two main components:
 
 1: V5_Core
 
 This is a complete master core, which contains the F765 processor and the main sensors, and expands the I/O through the DF17 series 80P interface.
 
-note: It may look like a SOLO or PIX2 Cube, because it all looks like a small square��but it is completely different, including the shape, screw hole installation position, interface definition,size,internal structure, are completely different, so V5 CORE and Cube are completely incompatible, if you need to V5_Core For secondary development, please refer to our open reference design.
+note: It may look like a SOLO or PIX2 Cube, because it all looks like a small square but it is completely different, including the shape, screw hole installation position, interface definition,size,internal structure, are completely different, so V5 CORE and Cube are completely incompatible, if you need to V5_Core For secondary development, please refer to our open reference design.
 
 2: V5_Base
 
@@ -15,4 +20,3 @@ This is a docking station and its main functions are:
 2: Built-in a PX4_IO_V2 processor
 3: Extend the V5_Core I/O through the wire-to-board connector.
 
-Design files or libraries may reference some references from PX4\PIXHAWK\3DR\Proficnc, thanks for their contributions to open source hardware. If there is any infringement, please contact us for deletion and modification.