REQUIEREMENTS:

1. Raspberry Pi Zero W
2. WaveShare 2.13 ink screen V2.
3. PiSugar2 battery.
4. 16 GB microSD Card high performance.

THIS VERSION WILL ONLY WORK WITH WIFI CONNECTION OR ETHERNET

CONNECT TO A WIFI NETWORK

---

EASY WAY

* sudo apt install git

* git clone https://github.com/curly60e/pyblockmicro.git

* cd pyblockmicro

* sudo sh first.sh

---

* sudo raspi-config

• Set autologin to ON
  • Reboot

---

MANUAL WAY

* sudo apt install git

* git clone https://github.com/curly60e/pyblockmicro.git

* cd pyblockmicro

* sudo apt update

* sudo apt upgrade

* sudo apt install tor

* sudo apt remove python3-pip python-pip

* sudo apt install python3-pip

---

* sudo apt install libopenjp2-7 libtiff5

---

* sudo raspi-config

• Interfacing Options -> SPI -> Yes
• Set autologin to ON
  • Reboot

---

* sudo apt install ttf-mscorefonts-installer

---

* sudo apt install git

* git clone https://github.com/curly60e/pyblockmicro.git

* cd pyblockmicro

* sudo pip3 install -r requirements.txt

* sudo cp torrc /etc/tor/

* sudo cp .bashrc /home/pi/

* sudo cp clocks.py /home/pi/

* sudo cp -r .git/ /home/pi/

* sudo cp papertty.service /etc/systemd/system

* sudo cp start.sh /home/pi/

* cd /home/pi/

* sudo chown root:root start.sh;sudo chmod 700 start.sh

* sudo systemctl daemon-reload

* sudo systemctl enable papertty

* sudo systemctl start papertty

---

Setup PiSugar2 Battery (OPTIONAL)

* curl http://cdn.pisugar.com/release/Pisugar-power-manager.sh | sudo bash

---

* sudo reboot

---

Mobile Phone tethering to your PyBLOCK micro over Bluetooth ONLY ANDROID.

* sudo apt-get install bluetooth bluez-utils bluez-compat

* sudo apt install python-dbus

* git clone https://github.com/WayneKeenan/RaspberryPi_BTPAN_AutoConnect.git

* sudo nano /etc/dhcpcd.conf

--- Add these lines ---

interface bnep0

static ip_address=192.168.44.49/24

static routers=192.168.44.1

static domain_name_servers=192.168.44.1

--- Save and Exit ---

* cd RaspberryPi_BTPAN_AutoConnect

* nano check-and-connect-bt-pan.sh

--- Edit the MAC address line and put your phone's MAC address ---

BT_MAC_ADDR=YOURPHONESADDRESS

--- Save and Exit ---

* sudo nano /etc/systemd/system/btpan.service

--- Create a Bluetooth service so it can start automatically on every boot and put these lines ---

[Unit]

Description=BtPan

DefaultDependencies=no

[Service]

Type=simple

KillSignal=SIGINT

TimeoutStopSec=8

Restart=on-failure

### Change the paths below to match yours

WorkingDirectory=/home/pi/

ExecStart=/home/pi/startbt.sh

###

[Install]

WantedBy=sysinit.target

--- Save and Exit ---

* sudo systemctl daemon-reload

* sudo systemctl enable btpan.service

* sudo systemctl start btpan.service

* sudo nano /home/pi/startbt.sh

--- Create a bash script to execute the service on every boot ---

#!/bin/sh

## Put your options here - the service unit will run this script, so that

## you don't need to 'daemon-reload' every time you want to change settings.

##

## It's a good idea to allow only root to write to this file:

##

## sudo chown root:root check-and-connect-bt-pan.sh; sudo chmod 700 check-and-connect-bt-pan.sh

##

/home/pi/bin/check-and-connect-bt-pan.sh

--- Save and Exit ---

START YOUR MOBILE PHONE BLUETOOTH AND ALLOW INTERNET TETHERING OVER BLUETOOTH

ON YOUR RPI TYPE...

* sudo chown root:root check-and-connect-bt-pan.sh; sudo chmod 700 check-and-connect-bt-pan.sh

* sudo chown root:root startbt.sh; sudo chmod 700 startbt.sh

* sudo bluetoothctl

* [bluetooth]# scan on

* --- Search for your Phone MAC address ---

* [bluetooth]# pair YOURPHONEMACADDRESS

* [bluetooth]# trust YOURPHONEMACADDRESS

* [bluetooth]# exit

* sudo reboot"

DONATE PYBLOCK

Samourai Wallet Paynym:

Lightning KeySend:

Monero: