client.go

// Package keyvault implements the Azure ARM Keyvault service API version 2016-10-01.
//
// The key vault client performs cryptographic key operations and vault operations against the Key Vault service.
package keyvault

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"context"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/validation"
	"net/http"
)

// BaseClient is the base client for Keyvault.
type BaseClient struct {
	autorest.Client
}

// New creates an instance of the BaseClient client.
func New() BaseClient {
	return NewWithoutDefaults()
}

// NewWithoutDefaults creates an instance of the BaseClient client.
func NewWithoutDefaults() BaseClient {
	return BaseClient{
		Client: autorest.NewClientWithUserAgent(UserAgent()),
	}
}

// BackupKey the Key Backup operation exports a key from Azure Key Vault in a protected form. Note that this operation
// does NOT return key material in a form that can be used outside the Azure Key Vault system, the returned key
// material is either protected to a Azure Key Vault HSM or to Azure Key Vault itself. The intent of this operation is
// to allow a client to GENERATE a key in one Azure Key Vault instance, BACKUP the key, and then RESTORE it into
// another Azure Key Vault instance. The BACKUP operation may be used to export, in protected form, any key type from
// Azure Key Vault. Individual versions of a key cannot be backed up. BACKUP / RESTORE can be performed within
// geographical boundaries only; meaning that a BACKUP from one geographical area cannot be restored to another
// geographical area. For example, a backup from the US geographical area cannot be restored in an EU geographical
// area. This operation requires the key/backup permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
func (client BaseClient) BackupKey(ctx context.Context, vaultBaseURL string, keyName string) (result BackupKeyResult, err error) {
	req, err := client.BackupKeyPreparer(ctx, vaultBaseURL, keyName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "BackupKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.BackupKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "BackupKey", resp, "Failure sending request")
		return
	}

	result, err = client.BackupKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "BackupKey", resp, "Failure responding to request")
	}

	return
}

// BackupKeyPreparer prepares the BackupKey request.
func (client BaseClient) BackupKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/backup", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// BackupKeySender sends the BackupKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) BackupKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// BackupKeyResponder handles the response to the BackupKey request. The method always
// closes the http.Response Body.
func (client BaseClient) BackupKeyResponder(resp *http.Response) (result BackupKeyResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// BackupSecret requests that a backup of the specified secret be downloaded to the client. All versions of the secret
// will be downloaded. This operation requires the secrets/backup permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret.
func (client BaseClient) BackupSecret(ctx context.Context, vaultBaseURL string, secretName string) (result BackupSecretResult, err error) {
	req, err := client.BackupSecretPreparer(ctx, vaultBaseURL, secretName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "BackupSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.BackupSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "BackupSecret", resp, "Failure sending request")
		return
	}

	result, err = client.BackupSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "BackupSecret", resp, "Failure responding to request")
	}

	return
}

// BackupSecretPreparer prepares the BackupSecret request.
func (client BaseClient) BackupSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name": autorest.Encode("path", secretName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/secrets/{secret-name}/backup", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// BackupSecretSender sends the BackupSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) BackupSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// BackupSecretResponder handles the response to the BackupSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) BackupSecretResponder(resp *http.Response) (result BackupSecretResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// CreateCertificate if this is the first version, the certificate resource is created. This operation requires the
// certificates/create permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate. parameters is the parameters to create a certificate.
func (client BaseClient) CreateCertificate(ctx context.Context, vaultBaseURL string, certificateName string, parameters CertificateCreateParameters) (result CertificateOperation, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: certificateName,
			Constraints: []validation.Constraint{{Target: "certificateName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z-]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.CertificatePolicy", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "parameters.CertificatePolicy.X509CertificateProperties", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.CertificatePolicy.X509CertificateProperties.ValidityInMonths", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.CertificatePolicy.X509CertificateProperties.ValidityInMonths", Name: validation.InclusiveMinimum, Rule: 0, Chain: nil}}},
					}},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "CreateCertificate", err.Error())
	}

	req, err := client.CreateCertificatePreparer(ctx, vaultBaseURL, certificateName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "CreateCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.CreateCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "CreateCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.CreateCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "CreateCertificate", resp, "Failure responding to request")
	}

	return
}

// CreateCertificatePreparer prepares the CreateCertificate request.
func (client BaseClient) CreateCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string, parameters CertificateCreateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/create", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateCertificateSender sends the CreateCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) CreateCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// CreateCertificateResponder handles the response to the CreateCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) CreateCertificateResponder(resp *http.Response) (result CertificateOperation, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// CreateKey the create key operation can be used to create any key type in Azure Key Vault. If the named key already
// exists, Azure Key Vault creates a new version of the key. It requires the keys/create permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name for the new
// key. The system will generate the version name for the new key. parameters is the parameters to create a key.
func (client BaseClient) CreateKey(ctx context.Context, vaultBaseURL string, keyName string, parameters KeyCreateParameters) (result KeyBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: keyName,
			Constraints: []validation.Constraint{{Target: "keyName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z-]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "CreateKey", err.Error())
	}

	req, err := client.CreateKeyPreparer(ctx, vaultBaseURL, keyName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "CreateKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.CreateKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "CreateKey", resp, "Failure sending request")
		return
	}

	result, err = client.CreateKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "CreateKey", resp, "Failure responding to request")
	}

	return
}

// CreateKeyPreparer prepares the CreateKey request.
func (client BaseClient) CreateKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string, parameters KeyCreateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/create", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateKeySender sends the CreateKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) CreateKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// CreateKeyResponder handles the response to the CreateKey request. The method always
// closes the http.Response Body.
func (client BaseClient) CreateKeyResponder(resp *http.Response) (result KeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Decrypt the DECRYPT operation decrypts a well-formed block of ciphertext using the target encryption key and
// specified algorithm. This operation is the reverse of the ENCRYPT operation; only a single block of data may be
// decrypted, the size of this block is dependent on the target key and the algorithm to be used. The DECRYPT operation
// applies to asymmetric and symmetric keys stored in Azure Key Vault since it uses the private portion of the key.
// This operation requires the keys/decrypt permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
// keyVersion is the version of the key. parameters is the parameters for the decryption operation.
func (client BaseClient) Decrypt(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (result KeyOperationResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Value", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "Decrypt", err.Error())
	}

	req, err := client.DecryptPreparer(ctx, vaultBaseURL, keyName, keyVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Decrypt", nil, "Failure preparing request")
		return
	}

	resp, err := client.DecryptSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Decrypt", resp, "Failure sending request")
		return
	}

	result, err = client.DecryptResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Decrypt", resp, "Failure responding to request")
	}

	return
}

// DecryptPreparer prepares the Decrypt request.
func (client BaseClient) DecryptPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}/decrypt", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DecryptSender sends the Decrypt request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DecryptSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DecryptResponder handles the response to the Decrypt request. The method always
// closes the http.Response Body.
func (client BaseClient) DecryptResponder(resp *http.Response) (result KeyOperationResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteCertificate deletes all versions of a certificate object along with its associated policy. Delete certificate
// cannot be used to remove individual versions of a certificate object. This operation requires the
// certificates/delete permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate.
func (client BaseClient) DeleteCertificate(ctx context.Context, vaultBaseURL string, certificateName string) (result DeletedCertificateBundle, err error) {
	req, err := client.DeleteCertificatePreparer(ctx, vaultBaseURL, certificateName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificate", resp, "Failure responding to request")
	}

	return
}

// DeleteCertificatePreparer prepares the DeleteCertificate request.
func (client BaseClient) DeleteCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteCertificateSender sends the DeleteCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteCertificateResponder handles the response to the DeleteCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteCertificateResponder(resp *http.Response) (result DeletedCertificateBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteCertificateContacts deletes the certificate contacts for a specified key vault certificate. This operation
// requires the certificates/managecontacts permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net.
func (client BaseClient) DeleteCertificateContacts(ctx context.Context, vaultBaseURL string) (result Contacts, err error) {
	req, err := client.DeleteCertificateContactsPreparer(ctx, vaultBaseURL)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateContacts", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteCertificateContactsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateContacts", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteCertificateContactsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateContacts", resp, "Failure responding to request")
	}

	return
}

// DeleteCertificateContactsPreparer prepares the DeleteCertificateContacts request.
func (client BaseClient) DeleteCertificateContactsPreparer(ctx context.Context, vaultBaseURL string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/certificates/contacts"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteCertificateContactsSender sends the DeleteCertificateContacts request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteCertificateContactsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteCertificateContactsResponder handles the response to the DeleteCertificateContacts request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteCertificateContactsResponder(resp *http.Response) (result Contacts, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteCertificateIssuer the DeleteCertificateIssuer operation permanently removes the specified certificate issuer
// from the vault. This operation requires the certificates/manageissuers/deleteissuers permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. issuerName is the name of the
// issuer.
func (client BaseClient) DeleteCertificateIssuer(ctx context.Context, vaultBaseURL string, issuerName string) (result IssuerBundle, err error) {
	req, err := client.DeleteCertificateIssuerPreparer(ctx, vaultBaseURL, issuerName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateIssuer", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteCertificateIssuerSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateIssuer", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteCertificateIssuerResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateIssuer", resp, "Failure responding to request")
	}

	return
}

// DeleteCertificateIssuerPreparer prepares the DeleteCertificateIssuer request.
func (client BaseClient) DeleteCertificateIssuerPreparer(ctx context.Context, vaultBaseURL string, issuerName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"issuer-name": autorest.Encode("path", issuerName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/issuers/{issuer-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteCertificateIssuerSender sends the DeleteCertificateIssuer request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteCertificateIssuerSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteCertificateIssuerResponder handles the response to the DeleteCertificateIssuer request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteCertificateIssuerResponder(resp *http.Response) (result IssuerBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteCertificateOperation deletes the creation operation for a specified certificate that is in the process of
// being created. The certificate is no longer created. This operation requires the certificates/update permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate.
func (client BaseClient) DeleteCertificateOperation(ctx context.Context, vaultBaseURL string, certificateName string) (result CertificateOperation, err error) {
	req, err := client.DeleteCertificateOperationPreparer(ctx, vaultBaseURL, certificateName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateOperation", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteCertificateOperationSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateOperation", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteCertificateOperationResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteCertificateOperation", resp, "Failure responding to request")
	}

	return
}

// DeleteCertificateOperationPreparer prepares the DeleteCertificateOperation request.
func (client BaseClient) DeleteCertificateOperationPreparer(ctx context.Context, vaultBaseURL string, certificateName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/pending", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteCertificateOperationSender sends the DeleteCertificateOperation request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteCertificateOperationSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteCertificateOperationResponder handles the response to the DeleteCertificateOperation request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteCertificateOperationResponder(resp *http.Response) (result CertificateOperation, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteKey the delete key operation cannot be used to remove individual versions of a key. This operation removes the
// cryptographic material associated with the key, which means the key is not usable for Sign/Verify, Wrap/Unwrap or
// Encrypt/Decrypt operations. This operation requires the keys/delete permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key to
// delete.
func (client BaseClient) DeleteKey(ctx context.Context, vaultBaseURL string, keyName string) (result DeletedKeyBundle, err error) {
	req, err := client.DeleteKeyPreparer(ctx, vaultBaseURL, keyName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteKey", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteKey", resp, "Failure responding to request")
	}

	return
}

// DeleteKeyPreparer prepares the DeleteKey request.
func (client BaseClient) DeleteKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteKeySender sends the DeleteKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteKeyResponder handles the response to the DeleteKey request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteKeyResponder(resp *http.Response) (result DeletedKeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteSasDefinition deletes a SAS definition from a specified storage account. This operation requires the
// storage/deletesas permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. sasDefinitionName is the name of the SAS definition.
func (client BaseClient) DeleteSasDefinition(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string) (result SasDefinitionBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: sasDefinitionName,
			Constraints: []validation.Constraint{{Target: "sasDefinitionName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "DeleteSasDefinition", err.Error())
	}

	req, err := client.DeleteSasDefinitionPreparer(ctx, vaultBaseURL, storageAccountName, sasDefinitionName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteSasDefinition", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteSasDefinitionSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteSasDefinition", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteSasDefinitionResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteSasDefinition", resp, "Failure responding to request")
	}

	return
}

// DeleteSasDefinitionPreparer prepares the DeleteSasDefinition request.
func (client BaseClient) DeleteSasDefinitionPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"sas-definition-name":  autorest.Encode("path", sasDefinitionName),
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}/sas/{sas-definition-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteSasDefinitionSender sends the DeleteSasDefinition request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteSasDefinitionSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteSasDefinitionResponder handles the response to the DeleteSasDefinition request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteSasDefinitionResponder(resp *http.Response) (result SasDefinitionBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteSecret the DELETE operation applies to any secret stored in Azure Key Vault. DELETE cannot be applied to an
// individual version of a secret. This operation requires the secrets/delete permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret.
func (client BaseClient) DeleteSecret(ctx context.Context, vaultBaseURL string, secretName string) (result DeletedSecretBundle, err error) {
	req, err := client.DeleteSecretPreparer(ctx, vaultBaseURL, secretName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteSecret", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteSecret", resp, "Failure responding to request")
	}

	return
}

// DeleteSecretPreparer prepares the DeleteSecret request.
func (client BaseClient) DeleteSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name": autorest.Encode("path", secretName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/secrets/{secret-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteSecretSender sends the DeleteSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteSecretResponder handles the response to the DeleteSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteSecretResponder(resp *http.Response) (result DeletedSecretBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// DeleteStorageAccount deletes a storage account. This operation requires the storage/delete permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account.
func (client BaseClient) DeleteStorageAccount(ctx context.Context, vaultBaseURL string, storageAccountName string) (result StorageBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "DeleteStorageAccount", err.Error())
	}

	req, err := client.DeleteStorageAccountPreparer(ctx, vaultBaseURL, storageAccountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteStorageAccount", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteStorageAccountSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteStorageAccount", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteStorageAccountResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "DeleteStorageAccount", resp, "Failure responding to request")
	}

	return
}

// DeleteStorageAccountPreparer prepares the DeleteStorageAccount request.
func (client BaseClient) DeleteStorageAccountPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteStorageAccountSender sends the DeleteStorageAccount request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) DeleteStorageAccountSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// DeleteStorageAccountResponder handles the response to the DeleteStorageAccount request. The method always
// closes the http.Response Body.
func (client BaseClient) DeleteStorageAccountResponder(resp *http.Response) (result StorageBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Encrypt the ENCRYPT operation encrypts an arbitrary sequence of bytes using an encryption key that is stored in
// Azure Key Vault. Note that the ENCRYPT operation only supports a single block of data, the size of which is
// dependent on the target key and the encryption algorithm to be used. The ENCRYPT operation is only strictly
// necessary for symmetric keys stored in Azure Key Vault since protection with an asymmetric key can be performed
// using public portion of the key. This operation is supported for asymmetric keys as a convenience for callers that
// have a key-reference but do not have access to the public key material. This operation requires the keys/encypt
// permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
// keyVersion is the version of the key. parameters is the parameters for the encryption operation.
func (client BaseClient) Encrypt(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (result KeyOperationResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Value", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "Encrypt", err.Error())
	}

	req, err := client.EncryptPreparer(ctx, vaultBaseURL, keyName, keyVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Encrypt", nil, "Failure preparing request")
		return
	}

	resp, err := client.EncryptSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Encrypt", resp, "Failure sending request")
		return
	}

	result, err = client.EncryptResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Encrypt", resp, "Failure responding to request")
	}

	return
}

// EncryptPreparer prepares the Encrypt request.
func (client BaseClient) EncryptPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}/encrypt", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// EncryptSender sends the Encrypt request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) EncryptSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// EncryptResponder handles the response to the Encrypt request. The method always
// closes the http.Response Body.
func (client BaseClient) EncryptResponder(resp *http.Response) (result KeyOperationResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetCertificate gets information about a specific certificate. This operation requires the certificates/get
// permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate in the given vault. certificateVersion is the version of the certificate.
func (client BaseClient) GetCertificate(ctx context.Context, vaultBaseURL string, certificateName string, certificateVersion string) (result CertificateBundle, err error) {
	req, err := client.GetCertificatePreparer(ctx, vaultBaseURL, certificateName, certificateVersion)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.GetCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificate", resp, "Failure responding to request")
	}

	return
}

// GetCertificatePreparer prepares the GetCertificate request.
func (client BaseClient) GetCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string, certificateVersion string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name":    autorest.Encode("path", certificateName),
		"certificate-version": autorest.Encode("path", certificateVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/{certificate-version}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificateSender sends the GetCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificateResponder handles the response to the GetCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificateResponder(resp *http.Response) (result CertificateBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetCertificateContacts the GetCertificateContacts operation returns the set of certificate contact resources in the
// specified key vault. This operation requires the certificates/managecontacts permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net.
func (client BaseClient) GetCertificateContacts(ctx context.Context, vaultBaseURL string) (result Contacts, err error) {
	req, err := client.GetCertificateContactsPreparer(ctx, vaultBaseURL)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateContacts", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificateContactsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateContacts", resp, "Failure sending request")
		return
	}

	result, err = client.GetCertificateContactsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateContacts", resp, "Failure responding to request")
	}

	return
}

// GetCertificateContactsPreparer prepares the GetCertificateContacts request.
func (client BaseClient) GetCertificateContactsPreparer(ctx context.Context, vaultBaseURL string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/certificates/contacts"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificateContactsSender sends the GetCertificateContacts request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificateContactsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificateContactsResponder handles the response to the GetCertificateContacts request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificateContactsResponder(resp *http.Response) (result Contacts, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetCertificateIssuer the GetCertificateIssuer operation returns the specified certificate issuer resources in the
// specified key vault. This operation requires the certificates/manageissuers/getissuers permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. issuerName is the name of the
// issuer.
func (client BaseClient) GetCertificateIssuer(ctx context.Context, vaultBaseURL string, issuerName string) (result IssuerBundle, err error) {
	req, err := client.GetCertificateIssuerPreparer(ctx, vaultBaseURL, issuerName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateIssuer", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificateIssuerSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateIssuer", resp, "Failure sending request")
		return
	}

	result, err = client.GetCertificateIssuerResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateIssuer", resp, "Failure responding to request")
	}

	return
}

// GetCertificateIssuerPreparer prepares the GetCertificateIssuer request.
func (client BaseClient) GetCertificateIssuerPreparer(ctx context.Context, vaultBaseURL string, issuerName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"issuer-name": autorest.Encode("path", issuerName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/issuers/{issuer-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificateIssuerSender sends the GetCertificateIssuer request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificateIssuerSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificateIssuerResponder handles the response to the GetCertificateIssuer request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificateIssuerResponder(resp *http.Response) (result IssuerBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetCertificateIssuers the GetCertificateIssuers operation returns the set of certificate issuer resources in the
// specified key vault. This operation requires the certificates/manageissuers/getissuers permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified the service will return up to 25 results.
func (client BaseClient) GetCertificateIssuers(ctx context.Context, vaultBaseURL string, maxresults *int32) (result CertificateIssuerListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetCertificateIssuers", err.Error())
	}

	result.fn = client.getCertificateIssuersNextResults
	req, err := client.GetCertificateIssuersPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateIssuers", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificateIssuersSender(req)
	if err != nil {
		result.cilr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateIssuers", resp, "Failure sending request")
		return
	}

	result.cilr, err = client.GetCertificateIssuersResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateIssuers", resp, "Failure responding to request")
	}

	return
}

// GetCertificateIssuersPreparer prepares the GetCertificateIssuers request.
func (client BaseClient) GetCertificateIssuersPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/certificates/issuers"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificateIssuersSender sends the GetCertificateIssuers request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificateIssuersSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificateIssuersResponder handles the response to the GetCertificateIssuers request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificateIssuersResponder(resp *http.Response) (result CertificateIssuerListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getCertificateIssuersNextResults retrieves the next set of results, if any.
func (client BaseClient) getCertificateIssuersNextResults(lastResults CertificateIssuerListResult) (result CertificateIssuerListResult, err error) {
	req, err := lastResults.certificateIssuerListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificateIssuersNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetCertificateIssuersSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificateIssuersNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetCertificateIssuersResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificateIssuersNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetCertificateIssuersComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetCertificateIssuersComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result CertificateIssuerListResultIterator, err error) {
	result.page, err = client.GetCertificateIssuers(ctx, vaultBaseURL, maxresults)
	return
}

// GetCertificateOperation gets the creation operation associated with a specified certificate. This operation requires
// the certificates/get permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate.
func (client BaseClient) GetCertificateOperation(ctx context.Context, vaultBaseURL string, certificateName string) (result CertificateOperation, err error) {
	req, err := client.GetCertificateOperationPreparer(ctx, vaultBaseURL, certificateName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateOperation", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificateOperationSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateOperation", resp, "Failure sending request")
		return
	}

	result, err = client.GetCertificateOperationResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateOperation", resp, "Failure responding to request")
	}

	return
}

// GetCertificateOperationPreparer prepares the GetCertificateOperation request.
func (client BaseClient) GetCertificateOperationPreparer(ctx context.Context, vaultBaseURL string, certificateName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/pending", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificateOperationSender sends the GetCertificateOperation request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificateOperationSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificateOperationResponder handles the response to the GetCertificateOperation request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificateOperationResponder(resp *http.Response) (result CertificateOperation, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetCertificatePolicy the GetCertificatePolicy operation returns the specified certificate policy resources in the
// specified key vault. This operation requires the certificates/get permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate in a given key vault.
func (client BaseClient) GetCertificatePolicy(ctx context.Context, vaultBaseURL string, certificateName string) (result CertificatePolicy, err error) {
	req, err := client.GetCertificatePolicyPreparer(ctx, vaultBaseURL, certificateName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificatePolicy", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificatePolicySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificatePolicy", resp, "Failure sending request")
		return
	}

	result, err = client.GetCertificatePolicyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificatePolicy", resp, "Failure responding to request")
	}

	return
}

// GetCertificatePolicyPreparer prepares the GetCertificatePolicy request.
func (client BaseClient) GetCertificatePolicyPreparer(ctx context.Context, vaultBaseURL string, certificateName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/policy", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificatePolicySender sends the GetCertificatePolicy request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificatePolicySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificatePolicyResponder handles the response to the GetCertificatePolicy request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificatePolicyResponder(resp *http.Response) (result CertificatePolicy, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetCertificates the GetCertificates operation returns the set of certificates resources in the specified key vault.
// This operation requires the certificates/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified the service will return up to 25 results.
func (client BaseClient) GetCertificates(ctx context.Context, vaultBaseURL string, maxresults *int32) (result CertificateListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetCertificates", err.Error())
	}

	result.fn = client.getCertificatesNextResults
	req, err := client.GetCertificatesPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificates", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificatesSender(req)
	if err != nil {
		result.clr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificates", resp, "Failure sending request")
		return
	}

	result.clr, err = client.GetCertificatesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificates", resp, "Failure responding to request")
	}

	return
}

// GetCertificatesPreparer prepares the GetCertificates request.
func (client BaseClient) GetCertificatesPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/certificates"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificatesSender sends the GetCertificates request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificatesSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificatesResponder handles the response to the GetCertificates request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificatesResponder(resp *http.Response) (result CertificateListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getCertificatesNextResults retrieves the next set of results, if any.
func (client BaseClient) getCertificatesNextResults(lastResults CertificateListResult) (result CertificateListResult, err error) {
	req, err := lastResults.certificateListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificatesNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetCertificatesSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificatesNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetCertificatesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificatesNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetCertificatesComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetCertificatesComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result CertificateListResultIterator, err error) {
	result.page, err = client.GetCertificates(ctx, vaultBaseURL, maxresults)
	return
}

// GetCertificateVersions the GetCertificateVersions operation returns the versions of a certificate in the specified
// key vault. This operation requires the certificates/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate. maxresults is maximum number of results to return in a page. If not specified the service will
// return up to 25 results.
func (client BaseClient) GetCertificateVersions(ctx context.Context, vaultBaseURL string, certificateName string, maxresults *int32) (result CertificateListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetCertificateVersions", err.Error())
	}

	result.fn = client.getCertificateVersionsNextResults
	req, err := client.GetCertificateVersionsPreparer(ctx, vaultBaseURL, certificateName, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateVersions", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetCertificateVersionsSender(req)
	if err != nil {
		result.clr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateVersions", resp, "Failure sending request")
		return
	}

	result.clr, err = client.GetCertificateVersionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetCertificateVersions", resp, "Failure responding to request")
	}

	return
}

// GetCertificateVersionsPreparer prepares the GetCertificateVersions request.
func (client BaseClient) GetCertificateVersionsPreparer(ctx context.Context, vaultBaseURL string, certificateName string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/versions", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetCertificateVersionsSender sends the GetCertificateVersions request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetCertificateVersionsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetCertificateVersionsResponder handles the response to the GetCertificateVersions request. The method always
// closes the http.Response Body.
func (client BaseClient) GetCertificateVersionsResponder(resp *http.Response) (result CertificateListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getCertificateVersionsNextResults retrieves the next set of results, if any.
func (client BaseClient) getCertificateVersionsNextResults(lastResults CertificateListResult) (result CertificateListResult, err error) {
	req, err := lastResults.certificateListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificateVersionsNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetCertificateVersionsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificateVersionsNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetCertificateVersionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getCertificateVersionsNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetCertificateVersionsComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetCertificateVersionsComplete(ctx context.Context, vaultBaseURL string, certificateName string, maxresults *int32) (result CertificateListResultIterator, err error) {
	result.page, err = client.GetCertificateVersions(ctx, vaultBaseURL, certificateName, maxresults)
	return
}

// GetDeletedCertificate the GetDeletedCertificate operation retrieves the deleted certificate information plus its
// attributes, such as retention interval, scheduled permanent deletion and the current deletion recovery level. This
// operation requires the certificates/get permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate
func (client BaseClient) GetDeletedCertificate(ctx context.Context, vaultBaseURL string, certificateName string) (result DeletedCertificateBundle, err error) {
	req, err := client.GetDeletedCertificatePreparer(ctx, vaultBaseURL, certificateName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetDeletedCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.GetDeletedCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedCertificate", resp, "Failure responding to request")
	}

	return
}

// GetDeletedCertificatePreparer prepares the GetDeletedCertificate request.
func (client BaseClient) GetDeletedCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedcertificates/{certificate-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetDeletedCertificateSender sends the GetDeletedCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetDeletedCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetDeletedCertificateResponder handles the response to the GetDeletedCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) GetDeletedCertificateResponder(resp *http.Response) (result DeletedCertificateBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetDeletedCertificates the GetDeletedCertificates operation retrieves the certificates in the current vault which
// are in a deleted state and ready for recovery or purging. This operation includes deletion-specific information.
// This operation requires the certificates/get/list permission. This operation can only be enabled on soft-delete
// enabled vaults.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified the service will return up to 25 results.
func (client BaseClient) GetDeletedCertificates(ctx context.Context, vaultBaseURL string, maxresults *int32) (result DeletedCertificateListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetDeletedCertificates", err.Error())
	}

	result.fn = client.getDeletedCertificatesNextResults
	req, err := client.GetDeletedCertificatesPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedCertificates", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetDeletedCertificatesSender(req)
	if err != nil {
		result.dclr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedCertificates", resp, "Failure sending request")
		return
	}

	result.dclr, err = client.GetDeletedCertificatesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedCertificates", resp, "Failure responding to request")
	}

	return
}

// GetDeletedCertificatesPreparer prepares the GetDeletedCertificates request.
func (client BaseClient) GetDeletedCertificatesPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/deletedcertificates"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetDeletedCertificatesSender sends the GetDeletedCertificates request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetDeletedCertificatesSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetDeletedCertificatesResponder handles the response to the GetDeletedCertificates request. The method always
// closes the http.Response Body.
func (client BaseClient) GetDeletedCertificatesResponder(resp *http.Response) (result DeletedCertificateListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getDeletedCertificatesNextResults retrieves the next set of results, if any.
func (client BaseClient) getDeletedCertificatesNextResults(lastResults DeletedCertificateListResult) (result DeletedCertificateListResult, err error) {
	req, err := lastResults.deletedCertificateListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedCertificatesNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetDeletedCertificatesSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedCertificatesNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetDeletedCertificatesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedCertificatesNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetDeletedCertificatesComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetDeletedCertificatesComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result DeletedCertificateListResultIterator, err error) {
	result.page, err = client.GetDeletedCertificates(ctx, vaultBaseURL, maxresults)
	return
}

// GetDeletedKey the Get Deleted Key operation is applicable for soft-delete enabled vaults. While the operation can be
// invoked on any vault, it will return an error if invoked on a non soft-delete enabled vault. This operation requires
// the keys/get permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
func (client BaseClient) GetDeletedKey(ctx context.Context, vaultBaseURL string, keyName string) (result DeletedKeyBundle, err error) {
	req, err := client.GetDeletedKeyPreparer(ctx, vaultBaseURL, keyName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetDeletedKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedKey", resp, "Failure sending request")
		return
	}

	result, err = client.GetDeletedKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedKey", resp, "Failure responding to request")
	}

	return
}

// GetDeletedKeyPreparer prepares the GetDeletedKey request.
func (client BaseClient) GetDeletedKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedkeys/{key-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetDeletedKeySender sends the GetDeletedKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetDeletedKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetDeletedKeyResponder handles the response to the GetDeletedKey request. The method always
// closes the http.Response Body.
func (client BaseClient) GetDeletedKeyResponder(resp *http.Response) (result DeletedKeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetDeletedKeys retrieves a list of the keys in the Key Vault as JSON Web Key structures that contain the public part
// of a deleted key. This operation includes deletion-specific information. The Get Deleted Keys operation is
// applicable for vaults enabled for soft-delete. While the operation can be invoked on any vault, it will return an
// error if invoked on a non soft-delete enabled vault. This operation requires the keys/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified the service will return up to 25 results.
func (client BaseClient) GetDeletedKeys(ctx context.Context, vaultBaseURL string, maxresults *int32) (result DeletedKeyListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetDeletedKeys", err.Error())
	}

	result.fn = client.getDeletedKeysNextResults
	req, err := client.GetDeletedKeysPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedKeys", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetDeletedKeysSender(req)
	if err != nil {
		result.dklr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedKeys", resp, "Failure sending request")
		return
	}

	result.dklr, err = client.GetDeletedKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedKeys", resp, "Failure responding to request")
	}

	return
}

// GetDeletedKeysPreparer prepares the GetDeletedKeys request.
func (client BaseClient) GetDeletedKeysPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/deletedkeys"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetDeletedKeysSender sends the GetDeletedKeys request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetDeletedKeysSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetDeletedKeysResponder handles the response to the GetDeletedKeys request. The method always
// closes the http.Response Body.
func (client BaseClient) GetDeletedKeysResponder(resp *http.Response) (result DeletedKeyListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getDeletedKeysNextResults retrieves the next set of results, if any.
func (client BaseClient) getDeletedKeysNextResults(lastResults DeletedKeyListResult) (result DeletedKeyListResult, err error) {
	req, err := lastResults.deletedKeyListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedKeysNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetDeletedKeysSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedKeysNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetDeletedKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedKeysNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetDeletedKeysComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetDeletedKeysComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result DeletedKeyListResultIterator, err error) {
	result.page, err = client.GetDeletedKeys(ctx, vaultBaseURL, maxresults)
	return
}

// GetDeletedSecret the Get Deleted Secret operation returns the specified deleted secret along with its attributes.
// This operation requires the secrets/get permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret.
func (client BaseClient) GetDeletedSecret(ctx context.Context, vaultBaseURL string, secretName string) (result DeletedSecretBundle, err error) {
	req, err := client.GetDeletedSecretPreparer(ctx, vaultBaseURL, secretName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetDeletedSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedSecret", resp, "Failure sending request")
		return
	}

	result, err = client.GetDeletedSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedSecret", resp, "Failure responding to request")
	}

	return
}

// GetDeletedSecretPreparer prepares the GetDeletedSecret request.
func (client BaseClient) GetDeletedSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name": autorest.Encode("path", secretName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedsecrets/{secret-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetDeletedSecretSender sends the GetDeletedSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetDeletedSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetDeletedSecretResponder handles the response to the GetDeletedSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) GetDeletedSecretResponder(resp *http.Response) (result DeletedSecretBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetDeletedSecrets the Get Deleted Secrets operation returns the secrets that have been deleted for a vault enabled
// for soft-delete. This operation requires the secrets/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified the service will return up to 25 results.
func (client BaseClient) GetDeletedSecrets(ctx context.Context, vaultBaseURL string, maxresults *int32) (result DeletedSecretListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetDeletedSecrets", err.Error())
	}

	result.fn = client.getDeletedSecretsNextResults
	req, err := client.GetDeletedSecretsPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedSecrets", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetDeletedSecretsSender(req)
	if err != nil {
		result.dslr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedSecrets", resp, "Failure sending request")
		return
	}

	result.dslr, err = client.GetDeletedSecretsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetDeletedSecrets", resp, "Failure responding to request")
	}

	return
}

// GetDeletedSecretsPreparer prepares the GetDeletedSecrets request.
func (client BaseClient) GetDeletedSecretsPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/deletedsecrets"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetDeletedSecretsSender sends the GetDeletedSecrets request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetDeletedSecretsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetDeletedSecretsResponder handles the response to the GetDeletedSecrets request. The method always
// closes the http.Response Body.
func (client BaseClient) GetDeletedSecretsResponder(resp *http.Response) (result DeletedSecretListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getDeletedSecretsNextResults retrieves the next set of results, if any.
func (client BaseClient) getDeletedSecretsNextResults(lastResults DeletedSecretListResult) (result DeletedSecretListResult, err error) {
	req, err := lastResults.deletedSecretListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedSecretsNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetDeletedSecretsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedSecretsNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetDeletedSecretsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getDeletedSecretsNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetDeletedSecretsComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetDeletedSecretsComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result DeletedSecretListResultIterator, err error) {
	result.page, err = client.GetDeletedSecrets(ctx, vaultBaseURL, maxresults)
	return
}

// GetKey the get key operation is applicable to all key types. If the requested key is symmetric, then no key material
// is released in the response. This operation requires the keys/get permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key to
// get. keyVersion is adding the version parameter retrieves a specific version of a key.
func (client BaseClient) GetKey(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string) (result KeyBundle, err error) {
	req, err := client.GetKeyPreparer(ctx, vaultBaseURL, keyName, keyVersion)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKey", resp, "Failure sending request")
		return
	}

	result, err = client.GetKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKey", resp, "Failure responding to request")
	}

	return
}

// GetKeyPreparer prepares the GetKey request.
func (client BaseClient) GetKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetKeySender sends the GetKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetKeyResponder handles the response to the GetKey request. The method always
// closes the http.Response Body.
func (client BaseClient) GetKeyResponder(resp *http.Response) (result KeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetKeys retrieves a list of the keys in the Key Vault as JSON Web Key structures that contain the public part of a
// stored key. The LIST operation is applicable to all key types, however only the base key identifier, attributes, and
// tags are provided in the response. Individual versions of a key are not listed in the response. This operation
// requires the keys/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified the service will return up to 25 results.
func (client BaseClient) GetKeys(ctx context.Context, vaultBaseURL string, maxresults *int32) (result KeyListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetKeys", err.Error())
	}

	result.fn = client.getKeysNextResults
	req, err := client.GetKeysPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKeys", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetKeysSender(req)
	if err != nil {
		result.klr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKeys", resp, "Failure sending request")
		return
	}

	result.klr, err = client.GetKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKeys", resp, "Failure responding to request")
	}

	return
}

// GetKeysPreparer prepares the GetKeys request.
func (client BaseClient) GetKeysPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/keys"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetKeysSender sends the GetKeys request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetKeysSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetKeysResponder handles the response to the GetKeys request. The method always
// closes the http.Response Body.
func (client BaseClient) GetKeysResponder(resp *http.Response) (result KeyListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getKeysNextResults retrieves the next set of results, if any.
func (client BaseClient) getKeysNextResults(lastResults KeyListResult) (result KeyListResult, err error) {
	req, err := lastResults.keyListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getKeysNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetKeysSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getKeysNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getKeysNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetKeysComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetKeysComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result KeyListResultIterator, err error) {
	result.page, err = client.GetKeys(ctx, vaultBaseURL, maxresults)
	return
}

// GetKeyVersions the full key identifier, attributes, and tags are provided in the response. This operation requires
// the keys/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
// maxresults is maximum number of results to return in a page. If not specified the service will return up to 25
// results.
func (client BaseClient) GetKeyVersions(ctx context.Context, vaultBaseURL string, keyName string, maxresults *int32) (result KeyListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetKeyVersions", err.Error())
	}

	result.fn = client.getKeyVersionsNextResults
	req, err := client.GetKeyVersionsPreparer(ctx, vaultBaseURL, keyName, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKeyVersions", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetKeyVersionsSender(req)
	if err != nil {
		result.klr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKeyVersions", resp, "Failure sending request")
		return
	}

	result.klr, err = client.GetKeyVersionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetKeyVersions", resp, "Failure responding to request")
	}

	return
}

// GetKeyVersionsPreparer prepares the GetKeyVersions request.
func (client BaseClient) GetKeyVersionsPreparer(ctx context.Context, vaultBaseURL string, keyName string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/versions", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetKeyVersionsSender sends the GetKeyVersions request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetKeyVersionsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetKeyVersionsResponder handles the response to the GetKeyVersions request. The method always
// closes the http.Response Body.
func (client BaseClient) GetKeyVersionsResponder(resp *http.Response) (result KeyListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getKeyVersionsNextResults retrieves the next set of results, if any.
func (client BaseClient) getKeyVersionsNextResults(lastResults KeyListResult) (result KeyListResult, err error) {
	req, err := lastResults.keyListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getKeyVersionsNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetKeyVersionsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getKeyVersionsNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetKeyVersionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getKeyVersionsNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetKeyVersionsComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetKeyVersionsComplete(ctx context.Context, vaultBaseURL string, keyName string, maxresults *int32) (result KeyListResultIterator, err error) {
	result.page, err = client.GetKeyVersions(ctx, vaultBaseURL, keyName, maxresults)
	return
}

// GetSasDefinition gets information about a SAS definition for the specified storage account. This operation requires
// the storage/getsas permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. sasDefinitionName is the name of the SAS definition.
func (client BaseClient) GetSasDefinition(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string) (result SasDefinitionBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: sasDefinitionName,
			Constraints: []validation.Constraint{{Target: "sasDefinitionName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetSasDefinition", err.Error())
	}

	req, err := client.GetSasDefinitionPreparer(ctx, vaultBaseURL, storageAccountName, sasDefinitionName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSasDefinition", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSasDefinitionSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSasDefinition", resp, "Failure sending request")
		return
	}

	result, err = client.GetSasDefinitionResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSasDefinition", resp, "Failure responding to request")
	}

	return
}

// GetSasDefinitionPreparer prepares the GetSasDefinition request.
func (client BaseClient) GetSasDefinitionPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"sas-definition-name":  autorest.Encode("path", sasDefinitionName),
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}/sas/{sas-definition-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSasDefinitionSender sends the GetSasDefinition request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetSasDefinitionSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetSasDefinitionResponder handles the response to the GetSasDefinition request. The method always
// closes the http.Response Body.
func (client BaseClient) GetSasDefinitionResponder(resp *http.Response) (result SasDefinitionBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetSasDefinitions list storage SAS definitions for the given storage account. This operation requires the
// storage/listsas permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. maxresults is maximum number of results to return in a page. If not specified the service
// will return up to 25 results.
func (client BaseClient) GetSasDefinitions(ctx context.Context, vaultBaseURL string, storageAccountName string, maxresults *int32) (result SasDefinitionListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetSasDefinitions", err.Error())
	}

	result.fn = client.getSasDefinitionsNextResults
	req, err := client.GetSasDefinitionsPreparer(ctx, vaultBaseURL, storageAccountName, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSasDefinitions", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSasDefinitionsSender(req)
	if err != nil {
		result.sdlr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSasDefinitions", resp, "Failure sending request")
		return
	}

	result.sdlr, err = client.GetSasDefinitionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSasDefinitions", resp, "Failure responding to request")
	}

	return
}

// GetSasDefinitionsPreparer prepares the GetSasDefinitions request.
func (client BaseClient) GetSasDefinitionsPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}/sas", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSasDefinitionsSender sends the GetSasDefinitions request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetSasDefinitionsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetSasDefinitionsResponder handles the response to the GetSasDefinitions request. The method always
// closes the http.Response Body.
func (client BaseClient) GetSasDefinitionsResponder(resp *http.Response) (result SasDefinitionListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getSasDefinitionsNextResults retrieves the next set of results, if any.
func (client BaseClient) getSasDefinitionsNextResults(lastResults SasDefinitionListResult) (result SasDefinitionListResult, err error) {
	req, err := lastResults.sasDefinitionListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSasDefinitionsNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetSasDefinitionsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSasDefinitionsNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetSasDefinitionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSasDefinitionsNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetSasDefinitionsComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetSasDefinitionsComplete(ctx context.Context, vaultBaseURL string, storageAccountName string, maxresults *int32) (result SasDefinitionListResultIterator, err error) {
	result.page, err = client.GetSasDefinitions(ctx, vaultBaseURL, storageAccountName, maxresults)
	return
}

// GetSecret the GET operation is applicable to any secret stored in Azure Key Vault. This operation requires the
// secrets/get permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret. secretVersion is the version of the secret.
func (client BaseClient) GetSecret(ctx context.Context, vaultBaseURL string, secretName string, secretVersion string) (result SecretBundle, err error) {
	req, err := client.GetSecretPreparer(ctx, vaultBaseURL, secretName, secretVersion)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecret", resp, "Failure sending request")
		return
	}

	result, err = client.GetSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecret", resp, "Failure responding to request")
	}

	return
}

// GetSecretPreparer prepares the GetSecret request.
func (client BaseClient) GetSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string, secretVersion string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name":    autorest.Encode("path", secretName),
		"secret-version": autorest.Encode("path", secretVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/secrets/{secret-name}/{secret-version}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSecretSender sends the GetSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetSecretResponder handles the response to the GetSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) GetSecretResponder(resp *http.Response) (result SecretBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetSecrets the Get Secrets operation is applicable to the entire vault. However, only the base secret identifier and
// its attributes are provided in the response. Individual secret versions are not listed in the response. This
// operation requires the secrets/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified, the service will return up to 25 results.
func (client BaseClient) GetSecrets(ctx context.Context, vaultBaseURL string, maxresults *int32) (result SecretListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetSecrets", err.Error())
	}

	result.fn = client.getSecretsNextResults
	req, err := client.GetSecretsPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecrets", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSecretsSender(req)
	if err != nil {
		result.slr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecrets", resp, "Failure sending request")
		return
	}

	result.slr, err = client.GetSecretsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecrets", resp, "Failure responding to request")
	}

	return
}

// GetSecretsPreparer prepares the GetSecrets request.
func (client BaseClient) GetSecretsPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/secrets"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSecretsSender sends the GetSecrets request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetSecretsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetSecretsResponder handles the response to the GetSecrets request. The method always
// closes the http.Response Body.
func (client BaseClient) GetSecretsResponder(resp *http.Response) (result SecretListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getSecretsNextResults retrieves the next set of results, if any.
func (client BaseClient) getSecretsNextResults(lastResults SecretListResult) (result SecretListResult, err error) {
	req, err := lastResults.secretListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSecretsNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetSecretsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSecretsNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetSecretsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSecretsNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetSecretsComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetSecretsComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result SecretListResultIterator, err error) {
	result.page, err = client.GetSecrets(ctx, vaultBaseURL, maxresults)
	return
}

// GetSecretVersions the full secret identifier and attributes are provided in the response. No values are returned for
// the secrets. This operations requires the secrets/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret. maxresults is maximum number of results to return in a page. If not specified, the service will return
// up to 25 results.
func (client BaseClient) GetSecretVersions(ctx context.Context, vaultBaseURL string, secretName string, maxresults *int32) (result SecretListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetSecretVersions", err.Error())
	}

	result.fn = client.getSecretVersionsNextResults
	req, err := client.GetSecretVersionsPreparer(ctx, vaultBaseURL, secretName, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecretVersions", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetSecretVersionsSender(req)
	if err != nil {
		result.slr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecretVersions", resp, "Failure sending request")
		return
	}

	result.slr, err = client.GetSecretVersionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetSecretVersions", resp, "Failure responding to request")
	}

	return
}

// GetSecretVersionsPreparer prepares the GetSecretVersions request.
func (client BaseClient) GetSecretVersionsPreparer(ctx context.Context, vaultBaseURL string, secretName string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name": autorest.Encode("path", secretName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/secrets/{secret-name}/versions", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetSecretVersionsSender sends the GetSecretVersions request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetSecretVersionsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetSecretVersionsResponder handles the response to the GetSecretVersions request. The method always
// closes the http.Response Body.
func (client BaseClient) GetSecretVersionsResponder(resp *http.Response) (result SecretListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getSecretVersionsNextResults retrieves the next set of results, if any.
func (client BaseClient) getSecretVersionsNextResults(lastResults SecretListResult) (result SecretListResult, err error) {
	req, err := lastResults.secretListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSecretVersionsNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetSecretVersionsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSecretVersionsNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetSecretVersionsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getSecretVersionsNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetSecretVersionsComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetSecretVersionsComplete(ctx context.Context, vaultBaseURL string, secretName string, maxresults *int32) (result SecretListResultIterator, err error) {
	result.page, err = client.GetSecretVersions(ctx, vaultBaseURL, secretName, maxresults)
	return
}

// GetStorageAccount gets information about a specified storage account. This operation requires the storage/get
// permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account.
func (client BaseClient) GetStorageAccount(ctx context.Context, vaultBaseURL string, storageAccountName string) (result StorageBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetStorageAccount", err.Error())
	}

	req, err := client.GetStorageAccountPreparer(ctx, vaultBaseURL, storageAccountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetStorageAccount", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetStorageAccountSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetStorageAccount", resp, "Failure sending request")
		return
	}

	result, err = client.GetStorageAccountResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetStorageAccount", resp, "Failure responding to request")
	}

	return
}

// GetStorageAccountPreparer prepares the GetStorageAccount request.
func (client BaseClient) GetStorageAccountPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetStorageAccountSender sends the GetStorageAccount request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetStorageAccountSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetStorageAccountResponder handles the response to the GetStorageAccount request. The method always
// closes the http.Response Body.
func (client BaseClient) GetStorageAccountResponder(resp *http.Response) (result StorageBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// GetStorageAccounts list storage accounts managed by the specified key vault. This operation requires the
// storage/list permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. maxresults is maximum number of
// results to return in a page. If not specified the service will return up to 25 results.
func (client BaseClient) GetStorageAccounts(ctx context.Context, vaultBaseURL string, maxresults *int32) (result StorageListResultPage, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: maxresults,
			Constraints: []validation.Constraint{{Target: "maxresults", Name: validation.Null, Rule: false,
				Chain: []validation.Constraint{{Target: "maxresults", Name: validation.InclusiveMaximum, Rule: 25, Chain: nil},
					{Target: "maxresults", Name: validation.InclusiveMinimum, Rule: 1, Chain: nil},
				}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "GetStorageAccounts", err.Error())
	}

	result.fn = client.getStorageAccountsNextResults
	req, err := client.GetStorageAccountsPreparer(ctx, vaultBaseURL, maxresults)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetStorageAccounts", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetStorageAccountsSender(req)
	if err != nil {
		result.slr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetStorageAccounts", resp, "Failure sending request")
		return
	}

	result.slr, err = client.GetStorageAccountsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "GetStorageAccounts", resp, "Failure responding to request")
	}

	return
}

// GetStorageAccountsPreparer prepares the GetStorageAccounts request.
func (client BaseClient) GetStorageAccountsPreparer(ctx context.Context, vaultBaseURL string, maxresults *int32) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}
	if maxresults != nil {
		queryParameters["maxresults"] = autorest.Encode("query", *maxresults)
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/storage"),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetStorageAccountsSender sends the GetStorageAccounts request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) GetStorageAccountsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// GetStorageAccountsResponder handles the response to the GetStorageAccounts request. The method always
// closes the http.Response Body.
func (client BaseClient) GetStorageAccountsResponder(resp *http.Response) (result StorageListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// getStorageAccountsNextResults retrieves the next set of results, if any.
func (client BaseClient) getStorageAccountsNextResults(lastResults StorageListResult) (result StorageListResult, err error) {
	req, err := lastResults.storageListResultPreparer()
	if err != nil {
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getStorageAccountsNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.GetStorageAccountsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "keyvault.BaseClient", "getStorageAccountsNextResults", resp, "Failure sending next results request")
	}
	result, err = client.GetStorageAccountsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "getStorageAccountsNextResults", resp, "Failure responding to next results request")
	}
	return
}

// GetStorageAccountsComplete enumerates all values, automatically crossing page boundaries as required.
func (client BaseClient) GetStorageAccountsComplete(ctx context.Context, vaultBaseURL string, maxresults *int32) (result StorageListResultIterator, err error) {
	result.page, err = client.GetStorageAccounts(ctx, vaultBaseURL, maxresults)
	return
}

// ImportCertificate imports an existing valid certificate, containing a private key, into Azure Key Vault. The
// certificate to be imported can be in either PFX or PEM format. If the certificate is in PEM format the PEM file must
// contain the key as well as x509 certificates. This operation requires the certificates/import permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate. parameters is the parameters to import the certificate.
func (client BaseClient) ImportCertificate(ctx context.Context, vaultBaseURL string, certificateName string, parameters CertificateImportParameters) (result CertificateBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: certificateName,
			Constraints: []validation.Constraint{{Target: "certificateName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z-]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Base64EncodedCertificate", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.CertificatePolicy", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.CertificatePolicy.X509CertificateProperties", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.CertificatePolicy.X509CertificateProperties.ValidityInMonths", Name: validation.Null, Rule: false,
							Chain: []validation.Constraint{{Target: "parameters.CertificatePolicy.X509CertificateProperties.ValidityInMonths", Name: validation.InclusiveMinimum, Rule: 0, Chain: nil}}},
						}},
					}}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "ImportCertificate", err.Error())
	}

	req, err := client.ImportCertificatePreparer(ctx, vaultBaseURL, certificateName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "ImportCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.ImportCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "ImportCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.ImportCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "ImportCertificate", resp, "Failure responding to request")
	}

	return
}

// ImportCertificatePreparer prepares the ImportCertificate request.
func (client BaseClient) ImportCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string, parameters CertificateImportParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/import", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ImportCertificateSender sends the ImportCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) ImportCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// ImportCertificateResponder handles the response to the ImportCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) ImportCertificateResponder(resp *http.Response) (result CertificateBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ImportKey the import key operation may be used to import any key type into an Azure Key Vault. If the named key
// already exists, Azure Key Vault creates a new version of the key. This operation requires the keys/import
// permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is name for the imported
// key. parameters is the parameters to import a key.
func (client BaseClient) ImportKey(ctx context.Context, vaultBaseURL string, keyName string, parameters KeyImportParameters) (result KeyBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: keyName,
			Constraints: []validation.Constraint{{Target: "keyName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z-]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Key", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "ImportKey", err.Error())
	}

	req, err := client.ImportKeyPreparer(ctx, vaultBaseURL, keyName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "ImportKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.ImportKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "ImportKey", resp, "Failure sending request")
		return
	}

	result, err = client.ImportKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "ImportKey", resp, "Failure responding to request")
	}

	return
}

// ImportKeyPreparer prepares the ImportKey request.
func (client BaseClient) ImportKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string, parameters KeyImportParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ImportKeySender sends the ImportKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) ImportKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// ImportKeyResponder handles the response to the ImportKey request. The method always
// closes the http.Response Body.
func (client BaseClient) ImportKeyResponder(resp *http.Response) (result KeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// MergeCertificate the MergeCertificate operation performs the merging of a certificate or certificate chain with a
// key pair currently available in the service. This operation requires the certificates/create permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate. parameters is the parameters to merge certificate.
func (client BaseClient) MergeCertificate(ctx context.Context, vaultBaseURL string, certificateName string, parameters CertificateMergeParameters) (result CertificateBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.X509Certificates", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "MergeCertificate", err.Error())
	}

	req, err := client.MergeCertificatePreparer(ctx, vaultBaseURL, certificateName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "MergeCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.MergeCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "MergeCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.MergeCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "MergeCertificate", resp, "Failure responding to request")
	}

	return
}

// MergeCertificatePreparer prepares the MergeCertificate request.
func (client BaseClient) MergeCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string, parameters CertificateMergeParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/pending/merge", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// MergeCertificateSender sends the MergeCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) MergeCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// MergeCertificateResponder handles the response to the MergeCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) MergeCertificateResponder(resp *http.Response) (result CertificateBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// PurgeDeletedCertificate the PurgeDeletedCertificate operation performs an irreversible deletion of the specified
// certificate, without possibility for recovery. The operation is not available if the recovery level does not specify
// 'Purgeable'. This operation requires the certificate/purge permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate
func (client BaseClient) PurgeDeletedCertificate(ctx context.Context, vaultBaseURL string, certificateName string) (result autorest.Response, err error) {
	req, err := client.PurgeDeletedCertificatePreparer(ctx, vaultBaseURL, certificateName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.PurgeDeletedCertificateSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.PurgeDeletedCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedCertificate", resp, "Failure responding to request")
	}

	return
}

// PurgeDeletedCertificatePreparer prepares the PurgeDeletedCertificate request.
func (client BaseClient) PurgeDeletedCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedcertificates/{certificate-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// PurgeDeletedCertificateSender sends the PurgeDeletedCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) PurgeDeletedCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// PurgeDeletedCertificateResponder handles the response to the PurgeDeletedCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) PurgeDeletedCertificateResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// PurgeDeletedKey the Purge Deleted Key operation is applicable for soft-delete enabled vaults. While the operation
// can be invoked on any vault, it will return an error if invoked on a non soft-delete enabled vault. This operation
// requires the keys/purge permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key
func (client BaseClient) PurgeDeletedKey(ctx context.Context, vaultBaseURL string, keyName string) (result autorest.Response, err error) {
	req, err := client.PurgeDeletedKeyPreparer(ctx, vaultBaseURL, keyName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.PurgeDeletedKeySender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedKey", resp, "Failure sending request")
		return
	}

	result, err = client.PurgeDeletedKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedKey", resp, "Failure responding to request")
	}

	return
}

// PurgeDeletedKeyPreparer prepares the PurgeDeletedKey request.
func (client BaseClient) PurgeDeletedKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedkeys/{key-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// PurgeDeletedKeySender sends the PurgeDeletedKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) PurgeDeletedKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// PurgeDeletedKeyResponder handles the response to the PurgeDeletedKey request. The method always
// closes the http.Response Body.
func (client BaseClient) PurgeDeletedKeyResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// PurgeDeletedSecret the purge deleted secret operation removes the secret permanently, without the possibility of
// recovery. This operation can only be enabled on a soft-delete enabled vault. This operation requires the
// secrets/purge permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret.
func (client BaseClient) PurgeDeletedSecret(ctx context.Context, vaultBaseURL string, secretName string) (result autorest.Response, err error) {
	req, err := client.PurgeDeletedSecretPreparer(ctx, vaultBaseURL, secretName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.PurgeDeletedSecretSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedSecret", resp, "Failure sending request")
		return
	}

	result, err = client.PurgeDeletedSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "PurgeDeletedSecret", resp, "Failure responding to request")
	}

	return
}

// PurgeDeletedSecretPreparer prepares the PurgeDeletedSecret request.
func (client BaseClient) PurgeDeletedSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name": autorest.Encode("path", secretName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedsecrets/{secret-name}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// PurgeDeletedSecretSender sends the PurgeDeletedSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) PurgeDeletedSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// PurgeDeletedSecretResponder handles the response to the PurgeDeletedSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) PurgeDeletedSecretResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// RecoverDeletedCertificate the RecoverDeletedCertificate operation performs the reversal of the Delete operation. The
// operation is applicable in vaults enabled for soft-delete, and must be issued during the retention interval
// (available in the deleted certificate's attributes). This operation requires the certificates/recover permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// deleted certificate
func (client BaseClient) RecoverDeletedCertificate(ctx context.Context, vaultBaseURL string, certificateName string) (result CertificateBundle, err error) {
	req, err := client.RecoverDeletedCertificatePreparer(ctx, vaultBaseURL, certificateName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.RecoverDeletedCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.RecoverDeletedCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedCertificate", resp, "Failure responding to request")
	}

	return
}

// RecoverDeletedCertificatePreparer prepares the RecoverDeletedCertificate request.
func (client BaseClient) RecoverDeletedCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedcertificates/{certificate-name}/recover", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RecoverDeletedCertificateSender sends the RecoverDeletedCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) RecoverDeletedCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// RecoverDeletedCertificateResponder handles the response to the RecoverDeletedCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) RecoverDeletedCertificateResponder(resp *http.Response) (result CertificateBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RecoverDeletedKey the Recover Deleted Key operation is applicable for deleted keys in soft-delete enabled vaults. It
// recovers the deleted key back to its latest version under /keys. An attempt to recover an non-deleted key will
// return an error. Consider this the inverse of the delete operation on soft-delete enabled vaults. This operation
// requires the keys/recover permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the deleted
// key.
func (client BaseClient) RecoverDeletedKey(ctx context.Context, vaultBaseURL string, keyName string) (result KeyBundle, err error) {
	req, err := client.RecoverDeletedKeyPreparer(ctx, vaultBaseURL, keyName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.RecoverDeletedKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedKey", resp, "Failure sending request")
		return
	}

	result, err = client.RecoverDeletedKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedKey", resp, "Failure responding to request")
	}

	return
}

// RecoverDeletedKeyPreparer prepares the RecoverDeletedKey request.
func (client BaseClient) RecoverDeletedKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name": autorest.Encode("path", keyName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedkeys/{key-name}/recover", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RecoverDeletedKeySender sends the RecoverDeletedKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) RecoverDeletedKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// RecoverDeletedKeyResponder handles the response to the RecoverDeletedKey request. The method always
// closes the http.Response Body.
func (client BaseClient) RecoverDeletedKeyResponder(resp *http.Response) (result KeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RecoverDeletedSecret recovers the deleted secret in the specified vault. This operation can only be performed on a
// soft-delete enabled vault. This operation requires the secrets/recover permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// deleted secret.
func (client BaseClient) RecoverDeletedSecret(ctx context.Context, vaultBaseURL string, secretName string) (result SecretBundle, err error) {
	req, err := client.RecoverDeletedSecretPreparer(ctx, vaultBaseURL, secretName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.RecoverDeletedSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedSecret", resp, "Failure sending request")
		return
	}

	result, err = client.RecoverDeletedSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RecoverDeletedSecret", resp, "Failure responding to request")
	}

	return
}

// RecoverDeletedSecretPreparer prepares the RecoverDeletedSecret request.
func (client BaseClient) RecoverDeletedSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name": autorest.Encode("path", secretName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/deletedsecrets/{secret-name}/recover", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RecoverDeletedSecretSender sends the RecoverDeletedSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) RecoverDeletedSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// RecoverDeletedSecretResponder handles the response to the RecoverDeletedSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) RecoverDeletedSecretResponder(resp *http.Response) (result SecretBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RegenerateStorageAccountKey regenerates the specified key value for the given storage account. This operation
// requires the storage/regeneratekey permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. parameters is the parameters to regenerate storage account key.
func (client BaseClient) RegenerateStorageAccountKey(ctx context.Context, vaultBaseURL string, storageAccountName string, parameters StorageAccountRegenerteKeyParameters) (result StorageBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.KeyName", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "RegenerateStorageAccountKey", err.Error())
	}

	req, err := client.RegenerateStorageAccountKeyPreparer(ctx, vaultBaseURL, storageAccountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RegenerateStorageAccountKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.RegenerateStorageAccountKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RegenerateStorageAccountKey", resp, "Failure sending request")
		return
	}

	result, err = client.RegenerateStorageAccountKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RegenerateStorageAccountKey", resp, "Failure responding to request")
	}

	return
}

// RegenerateStorageAccountKeyPreparer prepares the RegenerateStorageAccountKey request.
func (client BaseClient) RegenerateStorageAccountKeyPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, parameters StorageAccountRegenerteKeyParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}/regeneratekey", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RegenerateStorageAccountKeySender sends the RegenerateStorageAccountKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) RegenerateStorageAccountKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// RegenerateStorageAccountKeyResponder handles the response to the RegenerateStorageAccountKey request. The method always
// closes the http.Response Body.
func (client BaseClient) RegenerateStorageAccountKeyResponder(resp *http.Response) (result StorageBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RestoreKey imports a previously backed up key into Azure Key Vault, restoring the key, its key identifier,
// attributes and access control policies. The RESTORE operation may be used to import a previously backed up key.
// Individual versions of a key cannot be restored. The key is restored in its entirety with the same key name as it
// had when it was backed up. If the key name is not available in the target Key Vault, the RESTORE operation will be
// rejected. While the key name is retained during restore, the final key identifier will change if the key is restored
// to a different vault. Restore will restore all versions and preserve version identifiers. The RESTORE operation is
// subject to security constraints: The target Key Vault must be owned by the same Microsoft Azure Subscription as the
// source Key Vault The user must have RESTORE permission in the target Key Vault. This operation requires the
// keys/restore permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. parameters is the parameters to
// restore the key.
func (client BaseClient) RestoreKey(ctx context.Context, vaultBaseURL string, parameters KeyRestoreParameters) (result KeyBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.KeyBundleBackup", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "RestoreKey", err.Error())
	}

	req, err := client.RestoreKeyPreparer(ctx, vaultBaseURL, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RestoreKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.RestoreKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RestoreKey", resp, "Failure sending request")
		return
	}

	result, err = client.RestoreKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RestoreKey", resp, "Failure responding to request")
	}

	return
}

// RestoreKeyPreparer prepares the RestoreKey request.
func (client BaseClient) RestoreKeyPreparer(ctx context.Context, vaultBaseURL string, parameters KeyRestoreParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/keys/restore"),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RestoreKeySender sends the RestoreKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) RestoreKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// RestoreKeyResponder handles the response to the RestoreKey request. The method always
// closes the http.Response Body.
func (client BaseClient) RestoreKeyResponder(resp *http.Response) (result KeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RestoreSecret restores a backed up secret, and all its versions, to a vault. This operation requires the
// secrets/restore permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. parameters is the parameters to
// restore the secret.
func (client BaseClient) RestoreSecret(ctx context.Context, vaultBaseURL string, parameters SecretRestoreParameters) (result SecretBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.SecretBundleBackup", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "RestoreSecret", err.Error())
	}

	req, err := client.RestoreSecretPreparer(ctx, vaultBaseURL, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RestoreSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.RestoreSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RestoreSecret", resp, "Failure sending request")
		return
	}

	result, err = client.RestoreSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "RestoreSecret", resp, "Failure responding to request")
	}

	return
}

// RestoreSecretPreparer prepares the RestoreSecret request.
func (client BaseClient) RestoreSecretPreparer(ctx context.Context, vaultBaseURL string, parameters SecretRestoreParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/secrets/restore"),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RestoreSecretSender sends the RestoreSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) RestoreSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// RestoreSecretResponder handles the response to the RestoreSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) RestoreSecretResponder(resp *http.Response) (result SecretBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// SetCertificateContacts sets the certificate contacts for the specified key vault. This operation requires the
// certificates/managecontacts permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. contacts is the contacts for the
// key vault certificate.
func (client BaseClient) SetCertificateContacts(ctx context.Context, vaultBaseURL string, contacts Contacts) (result Contacts, err error) {
	req, err := client.SetCertificateContactsPreparer(ctx, vaultBaseURL, contacts)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetCertificateContacts", nil, "Failure preparing request")
		return
	}

	resp, err := client.SetCertificateContactsSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetCertificateContacts", resp, "Failure sending request")
		return
	}

	result, err = client.SetCertificateContactsResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetCertificateContacts", resp, "Failure responding to request")
	}

	return
}

// SetCertificateContactsPreparer prepares the SetCertificateContacts request.
func (client BaseClient) SetCertificateContactsPreparer(ctx context.Context, vaultBaseURL string, contacts Contacts) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPath("/certificates/contacts"),
		autorest.WithJSON(contacts),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// SetCertificateContactsSender sends the SetCertificateContacts request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) SetCertificateContactsSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// SetCertificateContactsResponder handles the response to the SetCertificateContacts request. The method always
// closes the http.Response Body.
func (client BaseClient) SetCertificateContactsResponder(resp *http.Response) (result Contacts, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// SetCertificateIssuer the SetCertificateIssuer operation adds or updates the specified certificate issuer. This
// operation requires the certificates/setissuers permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. issuerName is the name of the
// issuer. parameter is certificate issuer set parameter.
func (client BaseClient) SetCertificateIssuer(ctx context.Context, vaultBaseURL string, issuerName string, parameter CertificateIssuerSetParameters) (result IssuerBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameter,
			Constraints: []validation.Constraint{{Target: "parameter.Provider", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "SetCertificateIssuer", err.Error())
	}

	req, err := client.SetCertificateIssuerPreparer(ctx, vaultBaseURL, issuerName, parameter)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetCertificateIssuer", nil, "Failure preparing request")
		return
	}

	resp, err := client.SetCertificateIssuerSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetCertificateIssuer", resp, "Failure sending request")
		return
	}

	result, err = client.SetCertificateIssuerResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetCertificateIssuer", resp, "Failure responding to request")
	}

	return
}

// SetCertificateIssuerPreparer prepares the SetCertificateIssuer request.
func (client BaseClient) SetCertificateIssuerPreparer(ctx context.Context, vaultBaseURL string, issuerName string, parameter CertificateIssuerSetParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"issuer-name": autorest.Encode("path", issuerName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/issuers/{issuer-name}", pathParameters),
		autorest.WithJSON(parameter),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// SetCertificateIssuerSender sends the SetCertificateIssuer request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) SetCertificateIssuerSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// SetCertificateIssuerResponder handles the response to the SetCertificateIssuer request. The method always
// closes the http.Response Body.
func (client BaseClient) SetCertificateIssuerResponder(resp *http.Response) (result IssuerBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// SetSasDefinition creates or updates a new SAS definition for the specified storage account. This operation requires
// the storage/setsas permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. sasDefinitionName is the name of the SAS definition. parameters is the parameters to create
// a SAS definition.
func (client BaseClient) SetSasDefinition(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string, parameters SasDefinitionCreateParameters) (result SasDefinitionBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: sasDefinitionName,
			Constraints: []validation.Constraint{{Target: "sasDefinitionName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Parameters", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "SetSasDefinition", err.Error())
	}

	req, err := client.SetSasDefinitionPreparer(ctx, vaultBaseURL, storageAccountName, sasDefinitionName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetSasDefinition", nil, "Failure preparing request")
		return
	}

	resp, err := client.SetSasDefinitionSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetSasDefinition", resp, "Failure sending request")
		return
	}

	result, err = client.SetSasDefinitionResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetSasDefinition", resp, "Failure responding to request")
	}

	return
}

// SetSasDefinitionPreparer prepares the SetSasDefinition request.
func (client BaseClient) SetSasDefinitionPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string, parameters SasDefinitionCreateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"sas-definition-name":  autorest.Encode("path", sasDefinitionName),
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}/sas/{sas-definition-name}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// SetSasDefinitionSender sends the SetSasDefinition request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) SetSasDefinitionSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// SetSasDefinitionResponder handles the response to the SetSasDefinition request. The method always
// closes the http.Response Body.
func (client BaseClient) SetSasDefinitionResponder(resp *http.Response) (result SasDefinitionBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// SetSecret the SET operation adds a secret to the Azure Key Vault. If the named secret already exists, Azure Key
// Vault creates a new version of that secret. This operation requires the secrets/set permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret. parameters is the parameters for setting the secret.
func (client BaseClient) SetSecret(ctx context.Context, vaultBaseURL string, secretName string, parameters SecretSetParameters) (result SecretBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: secretName,
			Constraints: []validation.Constraint{{Target: "secretName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z-]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Value", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "SetSecret", err.Error())
	}

	req, err := client.SetSecretPreparer(ctx, vaultBaseURL, secretName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.SetSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetSecret", resp, "Failure sending request")
		return
	}

	result, err = client.SetSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetSecret", resp, "Failure responding to request")
	}

	return
}

// SetSecretPreparer prepares the SetSecret request.
func (client BaseClient) SetSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string, parameters SecretSetParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name": autorest.Encode("path", secretName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/secrets/{secret-name}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// SetSecretSender sends the SetSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) SetSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// SetSecretResponder handles the response to the SetSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) SetSecretResponder(resp *http.Response) (result SecretBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// SetStorageAccount creates or updates a new storage account. This operation requires the storage/set permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. parameters is the parameters to create a storage account.
func (client BaseClient) SetStorageAccount(ctx context.Context, vaultBaseURL string, storageAccountName string, parameters StorageAccountCreateParameters) (result StorageBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.ResourceID", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.ActiveKeyName", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.AutoRegenerateKey", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "SetStorageAccount", err.Error())
	}

	req, err := client.SetStorageAccountPreparer(ctx, vaultBaseURL, storageAccountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetStorageAccount", nil, "Failure preparing request")
		return
	}

	resp, err := client.SetStorageAccountSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetStorageAccount", resp, "Failure sending request")
		return
	}

	result, err = client.SetStorageAccountResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "SetStorageAccount", resp, "Failure responding to request")
	}

	return
}

// SetStorageAccountPreparer prepares the SetStorageAccount request.
func (client BaseClient) SetStorageAccountPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, parameters StorageAccountCreateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// SetStorageAccountSender sends the SetStorageAccount request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) SetStorageAccountSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// SetStorageAccountResponder handles the response to the SetStorageAccount request. The method always
// closes the http.Response Body.
func (client BaseClient) SetStorageAccountResponder(resp *http.Response) (result StorageBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Sign the SIGN operation is applicable to asymmetric and symmetric keys stored in Azure Key Vault since this
// operation uses the private portion of the key. This operation requires the keys/sign permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
// keyVersion is the version of the key. parameters is the parameters for the signing operation.
func (client BaseClient) Sign(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeySignParameters) (result KeyOperationResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Value", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "Sign", err.Error())
	}

	req, err := client.SignPreparer(ctx, vaultBaseURL, keyName, keyVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Sign", nil, "Failure preparing request")
		return
	}

	resp, err := client.SignSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Sign", resp, "Failure sending request")
		return
	}

	result, err = client.SignResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Sign", resp, "Failure responding to request")
	}

	return
}

// SignPreparer prepares the Sign request.
func (client BaseClient) SignPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeySignParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}/sign", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// SignSender sends the Sign request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) SignSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// SignResponder handles the response to the Sign request. The method always
// closes the http.Response Body.
func (client BaseClient) SignResponder(resp *http.Response) (result KeyOperationResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UnwrapKey the UNWRAP operation supports decryption of a symmetric key using the target key encryption key. This
// operation is the reverse of the WRAP operation. The UNWRAP operation applies to asymmetric and symmetric keys stored
// in Azure Key Vault since it uses the private portion of the key. This operation requires the keys/unwrapKey
// permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
// keyVersion is the version of the key. parameters is the parameters for the key operation.
func (client BaseClient) UnwrapKey(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (result KeyOperationResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Value", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "UnwrapKey", err.Error())
	}

	req, err := client.UnwrapKeyPreparer(ctx, vaultBaseURL, keyName, keyVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UnwrapKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.UnwrapKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UnwrapKey", resp, "Failure sending request")
		return
	}

	result, err = client.UnwrapKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UnwrapKey", resp, "Failure responding to request")
	}

	return
}

// UnwrapKeyPreparer prepares the UnwrapKey request.
func (client BaseClient) UnwrapKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}/unwrapkey", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UnwrapKeySender sends the UnwrapKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UnwrapKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UnwrapKeyResponder handles the response to the UnwrapKey request. The method always
// closes the http.Response Body.
func (client BaseClient) UnwrapKeyResponder(resp *http.Response) (result KeyOperationResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateCertificate the UpdateCertificate operation applies the specified update on the given certificate; the only
// elements updated are the certificate's attributes. This operation requires the certificates/update permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate in the given key vault. certificateVersion is the version of the certificate. parameters is the
// parameters for certificate update.
func (client BaseClient) UpdateCertificate(ctx context.Context, vaultBaseURL string, certificateName string, certificateVersion string, parameters CertificateUpdateParameters) (result CertificateBundle, err error) {
	req, err := client.UpdateCertificatePreparer(ctx, vaultBaseURL, certificateName, certificateVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificate", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateCertificateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificate", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateCertificateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificate", resp, "Failure responding to request")
	}

	return
}

// UpdateCertificatePreparer prepares the UpdateCertificate request.
func (client BaseClient) UpdateCertificatePreparer(ctx context.Context, vaultBaseURL string, certificateName string, certificateVersion string, parameters CertificateUpdateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name":    autorest.Encode("path", certificateName),
		"certificate-version": autorest.Encode("path", certificateVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/{certificate-version}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateCertificateSender sends the UpdateCertificate request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateCertificateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateCertificateResponder handles the response to the UpdateCertificate request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateCertificateResponder(resp *http.Response) (result CertificateBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateCertificateIssuer the UpdateCertificateIssuer operation performs an update on the specified certificate issuer
// entity. This operation requires the certificates/setissuers permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. issuerName is the name of the
// issuer. parameter is certificate issuer update parameter.
func (client BaseClient) UpdateCertificateIssuer(ctx context.Context, vaultBaseURL string, issuerName string, parameter CertificateIssuerUpdateParameters) (result IssuerBundle, err error) {
	req, err := client.UpdateCertificateIssuerPreparer(ctx, vaultBaseURL, issuerName, parameter)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificateIssuer", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateCertificateIssuerSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificateIssuer", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateCertificateIssuerResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificateIssuer", resp, "Failure responding to request")
	}

	return
}

// UpdateCertificateIssuerPreparer prepares the UpdateCertificateIssuer request.
func (client BaseClient) UpdateCertificateIssuerPreparer(ctx context.Context, vaultBaseURL string, issuerName string, parameter CertificateIssuerUpdateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"issuer-name": autorest.Encode("path", issuerName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/issuers/{issuer-name}", pathParameters),
		autorest.WithJSON(parameter),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateCertificateIssuerSender sends the UpdateCertificateIssuer request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateCertificateIssuerSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateCertificateIssuerResponder handles the response to the UpdateCertificateIssuer request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateCertificateIssuerResponder(resp *http.Response) (result IssuerBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateCertificateOperation updates a certificate creation operation that is already in progress. This operation
// requires the certificates/update permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate. certificateOperation is the certificate operation response.
func (client BaseClient) UpdateCertificateOperation(ctx context.Context, vaultBaseURL string, certificateName string, certificateOperation CertificateOperationUpdateParameter) (result CertificateOperation, err error) {
	req, err := client.UpdateCertificateOperationPreparer(ctx, vaultBaseURL, certificateName, certificateOperation)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificateOperation", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateCertificateOperationSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificateOperation", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateCertificateOperationResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificateOperation", resp, "Failure responding to request")
	}

	return
}

// UpdateCertificateOperationPreparer prepares the UpdateCertificateOperation request.
func (client BaseClient) UpdateCertificateOperationPreparer(ctx context.Context, vaultBaseURL string, certificateName string, certificateOperation CertificateOperationUpdateParameter) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/pending", pathParameters),
		autorest.WithJSON(certificateOperation),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateCertificateOperationSender sends the UpdateCertificateOperation request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateCertificateOperationSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateCertificateOperationResponder handles the response to the UpdateCertificateOperation request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateCertificateOperationResponder(resp *http.Response) (result CertificateOperation, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateCertificatePolicy set specified members in the certificate policy. Leave others as null. This operation
// requires the certificates/update permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. certificateName is the name of the
// certificate in the given vault. certificatePolicy is the policy for the certificate.
func (client BaseClient) UpdateCertificatePolicy(ctx context.Context, vaultBaseURL string, certificateName string, certificatePolicy CertificatePolicy) (result CertificatePolicy, err error) {
	req, err := client.UpdateCertificatePolicyPreparer(ctx, vaultBaseURL, certificateName, certificatePolicy)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificatePolicy", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateCertificatePolicySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificatePolicy", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateCertificatePolicyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateCertificatePolicy", resp, "Failure responding to request")
	}

	return
}

// UpdateCertificatePolicyPreparer prepares the UpdateCertificatePolicy request.
func (client BaseClient) UpdateCertificatePolicyPreparer(ctx context.Context, vaultBaseURL string, certificateName string, certificatePolicy CertificatePolicy) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"certificate-name": autorest.Encode("path", certificateName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/certificates/{certificate-name}/policy", pathParameters),
		autorest.WithJSON(certificatePolicy),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateCertificatePolicySender sends the UpdateCertificatePolicy request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateCertificatePolicySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateCertificatePolicyResponder handles the response to the UpdateCertificatePolicy request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateCertificatePolicyResponder(resp *http.Response) (result CertificatePolicy, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateKey in order to perform this operation, the key must already exist in the Key Vault. Note: The cryptographic
// material of a key itself cannot be changed. This operation requires the keys/update permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of key to
// update. keyVersion is the version of the key to update. parameters is the parameters of the key to update.
func (client BaseClient) UpdateKey(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyUpdateParameters) (result KeyBundle, err error) {
	req, err := client.UpdateKeyPreparer(ctx, vaultBaseURL, keyName, keyVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateKey", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateKey", resp, "Failure responding to request")
	}

	return
}

// UpdateKeyPreparer prepares the UpdateKey request.
func (client BaseClient) UpdateKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyUpdateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateKeySender sends the UpdateKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateKeyResponder handles the response to the UpdateKey request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateKeyResponder(resp *http.Response) (result KeyBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateSasDefinition updates the specified attributes associated with the given SAS definition. This operation
// requires the storage/setsas permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. sasDefinitionName is the name of the SAS definition. parameters is the parameters to update
// a SAS definition.
func (client BaseClient) UpdateSasDefinition(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string, parameters SasDefinitionUpdateParameters) (result SasDefinitionBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}},
		{TargetValue: sasDefinitionName,
			Constraints: []validation.Constraint{{Target: "sasDefinitionName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "UpdateSasDefinition", err.Error())
	}

	req, err := client.UpdateSasDefinitionPreparer(ctx, vaultBaseURL, storageAccountName, sasDefinitionName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateSasDefinition", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateSasDefinitionSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateSasDefinition", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateSasDefinitionResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateSasDefinition", resp, "Failure responding to request")
	}

	return
}

// UpdateSasDefinitionPreparer prepares the UpdateSasDefinition request.
func (client BaseClient) UpdateSasDefinitionPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, sasDefinitionName string, parameters SasDefinitionUpdateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"sas-definition-name":  autorest.Encode("path", sasDefinitionName),
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}/sas/{sas-definition-name}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateSasDefinitionSender sends the UpdateSasDefinition request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateSasDefinitionSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateSasDefinitionResponder handles the response to the UpdateSasDefinition request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateSasDefinitionResponder(resp *http.Response) (result SasDefinitionBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateSecret the UPDATE operation changes specified attributes of an existing stored secret. Attributes that are not
// specified in the request are left unchanged. The value of a secret itself cannot be changed. This operation requires
// the secrets/set permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. secretName is the name of the
// secret. secretVersion is the version of the secret. parameters is the parameters for update secret operation.
func (client BaseClient) UpdateSecret(ctx context.Context, vaultBaseURL string, secretName string, secretVersion string, parameters SecretUpdateParameters) (result SecretBundle, err error) {
	req, err := client.UpdateSecretPreparer(ctx, vaultBaseURL, secretName, secretVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateSecret", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateSecretSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateSecret", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateSecretResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateSecret", resp, "Failure responding to request")
	}

	return
}

// UpdateSecretPreparer prepares the UpdateSecret request.
func (client BaseClient) UpdateSecretPreparer(ctx context.Context, vaultBaseURL string, secretName string, secretVersion string, parameters SecretUpdateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"secret-name":    autorest.Encode("path", secretName),
		"secret-version": autorest.Encode("path", secretVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/secrets/{secret-name}/{secret-version}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateSecretSender sends the UpdateSecret request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateSecretSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateSecretResponder handles the response to the UpdateSecret request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateSecretResponder(resp *http.Response) (result SecretBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// UpdateStorageAccount updates the specified attributes associated with the given storage account. This operation
// requires the storage/set/update permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. storageAccountName is the name of
// the storage account. parameters is the parameters to update a storage account.
func (client BaseClient) UpdateStorageAccount(ctx context.Context, vaultBaseURL string, storageAccountName string, parameters StorageAccountUpdateParameters) (result StorageBundle, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: storageAccountName,
			Constraints: []validation.Constraint{{Target: "storageAccountName", Name: validation.Pattern, Rule: `^[0-9a-zA-Z]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "UpdateStorageAccount", err.Error())
	}

	req, err := client.UpdateStorageAccountPreparer(ctx, vaultBaseURL, storageAccountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateStorageAccount", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateStorageAccountSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateStorageAccount", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateStorageAccountResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "UpdateStorageAccount", resp, "Failure responding to request")
	}

	return
}

// UpdateStorageAccountPreparer prepares the UpdateStorageAccount request.
func (client BaseClient) UpdateStorageAccountPreparer(ctx context.Context, vaultBaseURL string, storageAccountName string, parameters StorageAccountUpdateParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"storage-account-name": autorest.Encode("path", storageAccountName),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/storage/{storage-account-name}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateStorageAccountSender sends the UpdateStorageAccount request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) UpdateStorageAccountSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// UpdateStorageAccountResponder handles the response to the UpdateStorageAccount request. The method always
// closes the http.Response Body.
func (client BaseClient) UpdateStorageAccountResponder(resp *http.Response) (result StorageBundle, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Verify the VERIFY operation is applicable to symmetric keys stored in Azure Key Vault. VERIFY is not strictly
// necessary for asymmetric keys stored in Azure Key Vault since signature verification can be performed using the
// public portion of the key but this operation is supported as a convenience for callers that only have a
// key-reference and not the public portion of the key. This operation requires the keys/verify permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
// keyVersion is the version of the key. parameters is the parameters for verify operations.
func (client BaseClient) Verify(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyVerifyParameters) (result KeyVerifyResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Digest", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.Signature", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "Verify", err.Error())
	}

	req, err := client.VerifyPreparer(ctx, vaultBaseURL, keyName, keyVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Verify", nil, "Failure preparing request")
		return
	}

	resp, err := client.VerifySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Verify", resp, "Failure sending request")
		return
	}

	result, err = client.VerifyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "Verify", resp, "Failure responding to request")
	}

	return
}

// VerifyPreparer prepares the Verify request.
func (client BaseClient) VerifyPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyVerifyParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}/verify", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// VerifySender sends the Verify request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) VerifySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// VerifyResponder handles the response to the Verify request. The method always
// closes the http.Response Body.
func (client BaseClient) VerifyResponder(resp *http.Response) (result KeyVerifyResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// WrapKey the WRAP operation supports encryption of a symmetric key using a key encryption key that has previously
// been stored in an Azure Key Vault. The WRAP operation is only strictly necessary for symmetric keys stored in Azure
// Key Vault since protection with an asymmetric key can be performed using the public portion of the key. This
// operation is supported for asymmetric keys as a convenience for callers that have a key-reference but do not have
// access to the public key material. This operation requires the keys/wrapKey permission.
//
// vaultBaseURL is the vault name, for example https://myvault.vault.azure.net. keyName is the name of the key.
// keyVersion is the version of the key. parameters is the parameters for wrap operation.
func (client BaseClient) WrapKey(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (result KeyOperationResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Value", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewError("keyvault.BaseClient", "WrapKey", err.Error())
	}

	req, err := client.WrapKeyPreparer(ctx, vaultBaseURL, keyName, keyVersion, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "WrapKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.WrapKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "WrapKey", resp, "Failure sending request")
		return
	}

	result, err = client.WrapKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "keyvault.BaseClient", "WrapKey", resp, "Failure responding to request")
	}

	return
}

// WrapKeyPreparer prepares the WrapKey request.
func (client BaseClient) WrapKeyPreparer(ctx context.Context, vaultBaseURL string, keyName string, keyVersion string, parameters KeyOperationsParameters) (*http.Request, error) {
	urlParameters := map[string]interface{}{
		"vaultBaseUrl": vaultBaseURL,
	}

	pathParameters := map[string]interface{}{
		"key-name":    autorest.Encode("path", keyName),
		"key-version": autorest.Encode("path", keyVersion),
	}

	const APIVersion = "2016-10-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithCustomBaseURL("{vaultBaseUrl}", urlParameters),
		autorest.WithPathParameters("/keys/{key-name}/{key-version}/wrapkey", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// WrapKeySender sends the WrapKey request. The method will close the
// http.Response Body if it receives an error.
func (client BaseClient) WrapKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req,
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
}

// WrapKeyResponder handles the response to the WrapKey request. The method always
// closes the http.Response Body.
func (client BaseClient) WrapKeyResponder(resp *http.Response) (result KeyOperationResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}