Skip to content

damienmaguire/Nissan-Leaf-Inverter-Controller

Repository files navigation

Nissan-Leaf-Inverter-Controller

OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter.
PCB files in DesignSpark 8.1 format.

Software courtesy of Perttu Ahola.
http://productions.8dromeda.net/c55-leaf-inverter-protocol.html
Slightly modified to run on an Arduino Due with an EV Shield.
Hardware untested as of release.

16/08/19 : V1 Hardware built and tested. Software in progress. Latest version uploaded. Works with BMW E46 throttle pedal and sends CAN to E46 body to make dash and other modules work as they should. Still in early alpha.

19/08/19 : Bare PCBs available for those wishing to build their own controller :
http://www.evbmw.com/index.php/evbmw-webshop/miscellaneous-bare-pcbs/leaf-vcm-bare

24/08/19 : Testing at full torque : https://www.youtube.com/watch?v=w1eDK8kHOu0

24/11/19 : BOM Updated with corrections.

27/03/20 : Uploaded new firmware with the following changes :

-Now supports the use of ESP8266 Olimex WiFi module and web display

-Supports ISA 100A CAN based shunt for battery monitoring

-Precharge and main contactor control

22/02/21 : Now starting work on control of the Gen 3 (2018+) Leaf inverter uploaded a CAN log from bench test of the inverter on its own.

About

OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published