Skip to content
forked from tianocore/edk2

Enables some recent Apple computers to run Windows 7

Notifications You must be signed in to change notification settings

davidcie/VgaShim

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

VgaShim

Who is this for

Anyone who wants to run Windows 7 natively on Apple MacBook Air (Early 2015) models. Could also work for other Apple and non-Apple machines that do away with legacy loaders and legacy VGA ROM. Was originally devised for a MacBookAir7,2 13" (Early 2015).

Why is this needed

Windows 7, even the x64 version booting in EFI mode, insists on using old VGA/VESA graphics configuration routines with the 10h interrupt. This used to work on older Apple machines because they had a legacy loader and/or an apropriate VGA ROM that provided that support. In newer computers they decided to remove that legacy compatibility layer and go pure EFI.

How does it work

This program attempts to:

  1. Unlock the (unused but locked for writing) C0000:CFFFF memory area where VGA ROM would normally reside using EFI_LEGACY_REGION_PROTOCOL, EFI_LEGACY_REGION2_PROTOCOL or Memory Type Range Registers depending on which method is available.
  2. Install an int10h handler in the C0000:CFFFF memory area which handles the most important calls Windows 7 makes and announces lack of support for others.
  3. Fill in and make available to Windows VESA video mode information compatible with the display adapter present that should enable Windows to write directly to the framebuffer before a more robust display driver takes over from vgapnp.sys.
  4. Lock the C0000:CFFFF memory area to prevent further possibly unauthorized writes.
  5. Adjust the Interrupt Vector Table entry for the 10h interrupt handler to point to the shim entry point.
  6. Display the Windows wavy flag (or any other animation of choice).
  7. Chainload \efi\microsoft\boot\bootmgfw.efi if present on the same volume so that Windows can continue loading.

How to use

The shim needs to run before the Windows Boot Manager. For more information on how to get a dual booting setup working please see this MacRumors thread.

How to build

I used a virtual Lubuntu 15.04 install with GCC 4.9. Edit Conf/target.txt after make-ing BaseTools if you have a different version of GCC.

sudo apt-get install uuid-dev nasm tofrodos
git clone https://github.com/davidcie/VgaShim
cd VgaShim
source edksetup.sh BaseTools
make -C BaseTools/Source/C
build

You will find the binary in Build/MdeModule/RELEASE_GCC49/X64/VgaShim.efi (or a similar folder if using GCC != 4.9).

Show me teh code

The actual source lives under MdeModulePkg/Applications/VgaShim.

Credits

  • This solution is based on a VBE shim prepared by the OVMF project (QemuVideoDxe/VbeShim).
  • My wife for her patience over many coding evenings.
  • Several people at MacRumors Forums who helped me understand graphics configuration.
  • ReactOS for sharing code that helped me understand what Windows is trying to do.
  • The EDK II project (and wider Tianocore) for making EFI app development possible at all.
  • Microsoft and Apple for for making this enjoyable journey necessary.

About

Enables some recent Apple computers to run Windows 7

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 63.4%
  • Python 18.8%
  • C++ 7.6%
  • Objective-C 6.2%
  • Assembly 2.8%
  • GAP 0.5%
  • Other 0.7%