-
Notifications
You must be signed in to change notification settings - Fork 1
StreamAssist installation and configuration
Stream Assist integration is used to receive the RTSP stream from the Android device to do wake word detection. Stream Assist depends on a Home Assistant Assist being configured.
Detailed install video: https://youtu.be/DkRCgv2LzR8
Stream Assist project repo: https://github.com/AlexxIT/StreamAssist
Install Home Assistant Community Store (HACS): https://github.com/dinki/View-Assist/wiki/Install-Home-Assistant-Community-Store-(HACS)
To install Stream Assist:
- Open HACS
- Go to Integrations
- Click the 3 dots (upper top corner)
- Choose Custom repositories
- Copy paste
AlexxIT/StreamAssist
- Go to Category: Integration
- Click Add
- Choose Stream Assist
- Click Install To configure Stream Assist:
- Go to settings
- Choose devices and services
- Click + Add Integration button at bottom right
- Search for Stream Assist
- Give the device a name (eg streamassist-livingroom)
- Enter the Stream URL for the microphone software you are using being sure to replace the example IP address with your IP tablet device's IP address
- Example format for RTPMic
rtp://192.168.0.152:55555
- Example format for IPWebcam
rtsp://192.168.0.152:8080/h264_ulaw.sdp
- Example format for RTPMic
- The media player device should be set to the device you'd like the audio to play from. I am using the media player device exposed from Fully Kiosk (eg media_player.tabletfullkiosk )
- You can choose a sound effect to alert when Assist is expecting a command. You can find many free sound effects at Pixabay. Here is one you may like. Pixabay has tons of free sounds. The one I chose for testing is:
https://pixabay.com/sound-effects/system-notification-199277/
Enter this value to add it to your configuration
media-source://media_source/local/system-notification-199277.mp3
For help finding your tablet's IP address, see this guide: https://github.com/dinki/View-Assist/wiki/Find-IP-of-Android-device
Additional installation and configuration can be found here: https://github.com/AlexxIT/StreamAssist?tab=readme-ov-file#installation
Also, be mindful that the mic switch is on. I have seen this turn off when rebooting the Android device and need to write an automation to ensure it is always on on boot.
- Home
-
01 Tablet Satellite Installation
-
Android Software
- Microphone (pick one)
- Browser display (pick one)
- Home Assistant
-
Android Software
-
02 View Assist Installation
- View Assist device configuration
- Dashboard and Views
- Control Automations
- Custom Sentences
- Showcase Gallery
- Custom Views
- Custom Sentences
- 03 Supported Devices
- Lenovo ThinkSmart Experimental
- ESPHome Voice Satellite