Dragino Yun -- A customized Arduino Yún version for Dragino Devices

OpenWrt Yun is the official source code installed in Arduino Yun.

This repository is forked from the OpenWrt Yun and add some customized feature to use in Dragino Devices such as: MS14, HE and Yun Shield.

There is another more generic firmware version for IoT,VoIP and Mesh. With the source in this link

Difference between these two firmware can be found difference between IoT Mesh and Dragino Yun firmware

How to compile the image?

git clone https://github.com/dragino/openwrt-yun Dragino-Yun
cd Dragino-Yun
./set_up_build_enviroment.sh    //only need to run at the first time. 
./build_image.sh

After complination, the images can be found on Dragino-Yun/image folder. The folder includes: *dragino2-yun-common-vxxx-kernel.bin kernel files, for upgrade in u-boot *dragino2-yun-common-vxxx-rootfs-squashfs.bin rootfs file, for upgrade in u-boot *dragino2-yun-common-vxxx-squashfs-sysupgrade.bin sysupgrade file, used for web-ui upgrade *md5sum md5sum for above files

How to debug if build fails?

cd Dragino-Yun/openwrt
make V=s

Above commands will enable verbose and build in single thread to get a view of the error during build.

How to make customized build?

in Dragino-Yun/openwrt folder, creat the customized folder like files-YOUR_BUILD_NAME or customized config .config.YOUR_BUILD_NAME.

in Dragino-Yun folder, run

./build_image.sh YOUR_BUILD_NAME

The build process will replace default files and .config with the customized files, and generate the image in Dragino-Yun/image

Have fun on Dragino Yun !!!