[#2112] remove $LJ::UNICODE config parameter

cgi-bin/Apache/LiveJournal.pm

@@ -1352,7 +1352,7 @@ sub journal_content
     my $status = $opts->{'status'} || "200 OK";
     $opts->{'contenttype'} ||= $opts->{'contenttype'} = "text/html";
     if ($opts->{'contenttype'} =~ m!^text/! &&
-        $LJ::UNICODE && $opts->{'contenttype'} !~ /charset=/) {
+        $opts->{'contenttype'} !~ /charset=/) {
         $opts->{'contenttype'} .= "; charset=utf-8";
     }
 

cgi-bin/DW/Controller/RPC/CutExpander.pm

@@ -84,7 +84,7 @@ sub load_cuttext {
 
     #load and prepare text of entry
     my $text = LJ::CleanHTML::quote_html( $entry_obj->event_raw, $get->{nohtml} );
-    LJ::item_toutf8( $journal, \$subject, \$text ) if $LJ::UNICODE && $entry_obj->props->{unknown8bit};
+    LJ::item_toutf8( $journal, \$subject, \$text ) if $entry_obj->props->{unknown8bit};
 
     my $suspend_msg = $entry_obj && $entry_obj->should_show_suspend_msg_to( $remote ) ? 1 : 0;
     my $cleanhtml_opts = { cuturl => $entry_obj->url,

cgi-bin/LJ/CleanHTML.pm

@@ -62,16 +62,11 @@ sub helper_preload
 
 
 # this treats normal characters and &entities; as single characters
-# also treats UTF-8 chars as single characters if $LJ::UNICODE
+# also treats UTF-8 chars as single characters
 my $onechar;
 {
     my $utf_longchar = '[\xc2-\xdf][\x80-\xbf]|\xe0[\xa0-\xbf][\x80-\xbf]|[\xe1-\xef][\x80-\xbf][\x80-\xbf]|\xf0[\x90-\xbf][\x80-\xbf][\x80-\xbf]|[\xf1-\xf7][\x80-\xbf][\x80-\xbf][\x80-\xbf]';
-    my $match;
-    if (not $LJ::UNICODE) {
-        $match = '[^&\s]|(&\#?\w{1,7};)';
-    } else {
-        $match = $utf_longchar . '|[^&\s\x80-\xff]|(?:&\#?\w{1,7};)';
-    }
+    my $match = $utf_longchar . '|[^&\s\x80-\xff]|(?:&\#?\w{1,7};)';
     $onechar = qr/$match/o;
 }
 

cgi-bin/LJ/Entry.pm

@@ -1513,7 +1513,7 @@ sub get_posts
 
 
     while (my ($id, $rp) = each %$rawposts) {
-        if ($LJ::UNICODE && $rp->{props}{unknown8bit}) {
+        if ( $rp->{props}{unknown8bit} ) {
             #LJ::item_toutf8($u, \$rp->{text}[0], \$rp->{text}[1], $rp->{props});
         }
     }
@@ -2611,7 +2611,6 @@ sub expand_embedded {
 sub item_toutf8
 {
     my ($u, $subject, $text, $props) = @_;
-    return unless $LJ::UNICODE;
     $props ||= {};
 
     my $convert = sub {

cgi-bin/LJ/Feed.pm

@@ -193,7 +193,7 @@ sub make_feed
         next ENTRY if $posteru{$it->{'posterid'}} && $posteru{$it->{'posterid'}}->is_suspended;
         next ENTRY if $entry_obj && $entry_obj->is_suspended_for($remote);
 
-        if ($LJ::UNICODE && $logprops{$itemid}->{'unknown8bit'}) {
+        if ( $logprops{$itemid}->{'unknown8bit'} ) {
             LJ::item_toutf8($u, \$logtext->{$itemid}->[0],
                             \$logtext->{$itemid}->[1], $logprops{$itemid});
         }

cgi-bin/LJ/Global/BMLInit.pm

@@ -57,9 +57,7 @@ BML::register_hook("codeerror", sub {
     }
 });
 
-if ($LJ::UNICODE) {
-    BML::set_config("DefaultContentType", "text/html; charset=utf-8");
-}
+BML::set_config("DefaultContentType", "text/html; charset=utf-8");
 
 # register BML multi-language hook
 BML::register_hook("ml_getter", \&LJ::Lang::get_text);

cgi-bin/LJ/Global/Constants.pm

@@ -28,8 +28,8 @@ use constant MAX_32BIT_SIGNED => 2147483647;
 $LJ::MAX_32BIT_SIGNED = 2147483647;
 
 # width constants. BMAX_ constants are restrictions on byte width,
-# CMAX_ on character width (character means byte unless $LJ::UNICODE,
-# in which case it means a UTF-8 character).
+# CMAX_ on character width (character used to mean byte, but now
+# it means a UTF-8 character).
 
 use constant BMAX_SUBJECT => 255; # *_SUBJECT for journal events, not comments
 use constant CMAX_SUBJECT => 100;

cgi-bin/LJ/Global/Defaults.pm

@@ -47,8 +47,6 @@ no strict "vars";
 
     $SERVER_NAME ||= Sys::Hostname::hostname();
 
-    $UNICODE = 1 unless defined $UNICODE;
-
     @LANGS = ("en") unless @LANGS;
     $DEFAULT_LANG ||= $LANGS[0];
 

cgi-bin/LJ/Protocol.pm

@@ -578,12 +578,6 @@ sub login
     my $res = {};
     my $ver = $req->{'ver'};
 
-    ## check for version mismatches
-    ## non-Unicode installations can't handle versions >=1
-
-    return fail($err,207, "This installation does not support Unicode clients")
-        if $ver>=1 and not $LJ::UNICODE;
-
     # do not let locked people log in
     return fail($err, 308) if $u->is_locked;
 
@@ -1045,8 +1039,6 @@ sub common_event_validation
             my $uowner = $flags->{u_owner} || $flags->{u};
             return fail($err,207,'Posting in a community with international or special characters require a Unicode-capable LiveJournal client.  Download one at http://www.livejournal.com/download/.')
                 if ! $uowner->is_person;
-        } else {
-            return fail($err,207, "This installation does not support Unicode clients") unless $LJ::UNICODE;
         }
 
         # validate that the text is valid UTF-8
@@ -2455,9 +2447,8 @@ sub getevents
     }
 
     # load properties. Even if the caller doesn't want them, we need
-    # them in Unicode installations to recognize older 8bit non-UF-8
+    # them in Unicode installations to recognize older 8bit non-UTF-8
     # entries.
-    unless ($req->{'noprops'} && !$LJ::UNICODE)
     {
         ### do the properties now
         $count = 0;
@@ -2520,12 +2511,12 @@ sub getevents
 
         # now that we have the subject, the event and the props,
         # auto-translate them to UTF-8 if they're not in UTF-8.
-        if ($LJ::UNICODE && $req->{ver} >= 1 && $evt->{props}->{unknown8bit}) {
+        if ( $req->{ver} >= 1 && $evt->{props}->{unknown8bit} ) {
             LJ::item_toutf8($uowner, \$t->[0], \$t->[1], $evt->{props});
             $evt->{converted_with_loss} = 1;
         }
 
-        if ($LJ::UNICODE && $req->{'ver'} < 1 && !$evt->{'props'}->{'unknown8bit'}) {
+        if ( $req->{'ver'} < 1 && !$evt->{'props'}->{'unknown8bit'} ) {
             unless ( LJ::is_ascii($t->[0]) &&
                      LJ::is_ascii($t->[1]) &&
                      LJ::is_ascii(join(' ', values %{$evt->{'props'}}) )) {

cgi-bin/LJ/S2.pm

@@ -2133,7 +2133,7 @@ sub Entry_from_entryobj
     #load and prepare subject and text of entry
     my $subject = LJ::CleanHTML::quote_html( $entry_obj->subject_html, $get->{nohtml} );
     my $text = $no_entry_body ? "" : LJ::CleanHTML::quote_html( $entry_obj->event_raw, $get->{nohtml} );
-    LJ::item_toutf8( $journal, \$subject, \$text, $entry_obj->props ) if $LJ::UNICODE && $entry_obj->props->{unknown8bit};
+    LJ::item_toutf8( $journal, \$subject, \$text, $entry_obj->props ) if $entry_obj->props->{unknown8bit};
 
     my $suspend_msg = $entry_obj && $entry_obj->should_show_suspend_msg_to( $remote ) ? 1 : 0;
 
@@ -2356,7 +2356,7 @@ sub Page
         include_meta_viewport => $r->cookie( 'no_mobile' ) ? 0 : 1,
     };
 
-    if ($LJ::UNICODE && $opts && $opts->{'saycharset'}) {
+    if ( $opts && $opts->{'saycharset'} ) {
         $p->{'head_content'} .= '<meta http-equiv="Content-Type" content="text/html; charset=' . $opts->{'saycharset'} . "\" />\n";
     }
 

cgi-bin/LJ/S2/EntryPage.pm

@@ -62,9 +62,8 @@ sub EntryPage
     if ($u->should_block_robots || $entry->should_block_robots) {
         $p->{'head_content'} .= LJ::robot_meta_tags();
     }
-    if ($LJ::UNICODE) {
-        $p->{'head_content'} .= '<meta http-equiv="Content-Type" content="text/html; charset='.$opts->{'saycharset'}."\" />\n";
-    }
+
+    $p->{'head_content'} .= '<meta http-equiv="Content-Type" content="text/html; charset='.$opts->{'saycharset'}."\" />\n";
 
     my $prev_url = S2::Builtin::LJ::Entry__get_link( $opts->{ctx}, $s2entry, "nav_prev" )->{url};
     $p->{head_content} .= qq{<link rel="prev" href="$prev_url" />\n} if $prev_url;

cgi-bin/LJ/S2/ReplyPage.pm

@@ -170,15 +170,15 @@ sub ReplyPage
             LJ::load_talk_props2($u, [ $re_talkid ])->{$re_talkid} || {};
         $parpost->{'dtid'} = $dtalkid;
 
-        if($LJ::UNICODE && $parpost->{'props'}->{'unknown8bit'}) {
+        if( $parpost->{'props'}->{'unknown8bit'} ) {
             LJ::item_toutf8($u, \$parpost->{'subject'}, \$parpost->{'body'}, {});
         }
 
         my $datetime = DateTime_unix(LJ::mysqldate_to_time($parpost->{'datepost'}));
-        
+
         my $comment_userpic;
         my $s2poster;
-        
+
         my $pu = $parentcomment->poster;
         if ( $pu ) {
             return $opts->{handler_return} = 403 if $pu->is_suspended; # do not show comments by suspended users

cgi-bin/LJ/S2/YearPage.pm

@@ -30,9 +30,8 @@ sub YearPage
     if ($u->should_block_robots) {
         $p->{'head_content'} .= LJ::robot_meta_tags();
     }
-    if ($LJ::UNICODE) {
-        $p->{'head_content'} .= '<meta http-equiv="Content-Type" content="text/html; charset='.$opts->{'saycharset'}."\" />\n";
-    }
+
+    $p->{'head_content'} .= '<meta http-equiv="Content-Type" content="text/html; charset='.$opts->{'saycharset'}."\" />\n";
 
     my $get = $opts->{'getargs'};
 

cgi-bin/LJ/Talk.pm

@@ -258,7 +258,7 @@ sub get_journal_item
     LJ::load_log_props2($u->{'userid'}, [ $itemid ], \%logprops);
     $item->{'props'} = $logprops{$itemid} || {};
 
-    if ($LJ::UNICODE && $logprops{$itemid}->{'unknown8bit'}) {
+    if ( $logprops{$itemid}->{'unknown8bit'} ) {
         LJ::item_toutf8($u, \$item->{'subject'}, \$item->{'event'},
                         $item->{'logprops'}->{$itemid});
     }
@@ -1233,14 +1233,12 @@ sub load_comments
         }
     }
 
-    if ($LJ::UNICODE) {
-        foreach (@posts_to_load) {
-            if ($posts->{$_}->{'props'}->{'unknown8bit'}) {
-                LJ::item_toutf8($u, \$posts->{$_}->{'subject'},
-                                \$posts->{$_}->{'body'},
-                                {});
-              }
-        }
+    foreach (@posts_to_load) {
+        if ($posts->{$_}->{'props'}->{'unknown8bit'}) {
+            LJ::item_toutf8($u, \$posts->{$_}->{'subject'},
+                            \$posts->{$_}->{'body'},
+                            {});
+          }
     }
 
     # load users who posted
@@ -2129,7 +2127,7 @@ sub icon_dropdown {
     my %res;
     if ( $remote ) {
         LJ::do_request({ mode => "login",
-                         ver  => ($LJ::UNICODE ? "1" : "0"),
+                         ver  => $LJ::PROTOCOL_VER,
                          user => $remote->{'user'},
                          getpickws => 1,
                        }, \%res, { "noauth" => 1, "userid" => $remote->{'userid'} });
@@ -3296,15 +3294,6 @@ sub init {
     return $err->("<?badinput?>") unless LJ::text_in($form);
 
     $init->{unknown8bit} = 0;
-    unless (LJ::is_ascii($form->{'body'}) && LJ::is_ascii($form->{'subject'})) {
-        if ($LJ::UNICODE) {
-            # no need to check if they're well-formed, we did that above
-        } else {
-            # so rest of site can change chars to ? marks until
-            # default user's encoding is set.  (legacy support)
-            $init->{unknown8bit} = 1;
-        }
-    }
 
     my ($bl, $cl) = LJ::text_length($form->{'body'});
     if ($cl > LJ::CMAX_COMMENT) {

cgi-bin/LJ/TextUtil.pm

@@ -405,9 +405,6 @@ sub text_out
 {
     my $rtext = shift;
 
-    # if we're not Unicode, do nothing
-    return unless $LJ::UNICODE;
-
     # is this valid UTF-8 already?
     return if LJ::is_utf8($$rtext);
 
@@ -427,7 +424,7 @@ sub text_out
 sub text_in
 {
     my $text = shift;
-    return 1 unless $LJ::UNICODE;
+
     if (ref ($text) eq "HASH") {
         return ! (grep { !LJ::is_utf8($_) } values %{$text});
     }
@@ -478,9 +475,8 @@ sub text_convert {
 
 # <LJFUNC>
 # name: LJ::text_length
-# des: returns both byte length and character length of a string. In a non-Unicode
-#      environment, this means byte length twice. In a Unicode environment,
-#      the function assumes that its argument is a valid UTF-8 string.
+# des: returns both byte length and character length of a string.
+#      The function assumes that its argument is a valid UTF-8 string.
 # args: text
 # des-text: the string to measure
 # returns: a list of two values, (byte_length, char_length).
@@ -490,9 +486,6 @@ sub text_length
 {
     my $text = shift;
     my $bl = length($text);
-    unless ($LJ::UNICODE) {
-        return ($bl, $bl);
-    }
     my $cl = 0;
     my $utf_char = "([\x00-\x7f]|[\xc0-\xdf].|[\xe0-\xef]..|[\xf0-\xf7]...)";
 
@@ -503,8 +496,7 @@ sub text_length
 # <LJFUNC>
 # name: LJ::text_trim
 # des: truncate string according to requirements on byte length, char
-#      length, or both. "char length" means number of UTF-8 characters if
-#      [ljconfig[unicode]] is set, or the same thing as byte length otherwise.
+#      length, or both. "char length" means number of UTF-8 characters.
 # args: text, byte_max, char_max
 # des-text: the string to trim
 # des-byte_max: maximum allowed length in bytes; if 0, there's no restriction
@@ -517,11 +509,6 @@ sub text_trim
     $text = defined $text ? LJ::trim( $text ) : '';
     return $text unless $byte_max or $char_max;
 
-    if (!$LJ::UNICODE) {
-        $byte_max = $char_max if $char_max and $char_max < $byte_max;
-        $byte_max = $char_max unless $byte_max;
-        return LJ::trim( substr( $text, 0, $byte_max ) );
-    }
     my $cur = 0;
     my $utf_char = "([\x00-\x7f]|[\xc0-\xdf].|[\xe0-\xef]..|[\xf0-\xf7]...)";
 

cgi-bin/LJ/Web.pm

@@ -866,7 +866,7 @@ sub create_qr_div {
     {
         my %res;
         LJ::do_request({ mode => "login",
-                         ver => ($LJ::UNICODE ? "1" : "0"),
+                         ver => $LJ::PROTOCOL_VER,
                          user => $remote->user,
                          getpickws => 1,
                          getpickwurls => 1,

cgi-bin/lj-bml-blocks.pl

@@ -57,11 +57,7 @@
     BML::register_block("DL", "DR", $dl);
 }
 
-if ($LJ::UNICODE) {
-    BML::register_block("METACTYPE", "S", '<meta http-equiv="Content-Type" content="text/html; charset=utf-8">')
-} else {
-    BML::register_block("METACTYPE", "S", '<meta http-equiv="Content-Type" content="text/html">')
-}
+BML::register_block("METACTYPE", "S", '<meta http-equiv="Content-Type" content="text/html; charset=utf-8">')
 
 
 1;

cgi-bin/ljlib.pl

@@ -149,8 +149,10 @@ sub Unicode::MapUTF8::AUTOLOAD {
 LJ::MemCache::init();
 
 # $LJ::PROTOCOL_VER is the version of the client-server protocol
-# used uniformly by server code which uses the protocol.
-$LJ::PROTOCOL_VER = ($LJ::UNICODE ? "1" : "0");
+# used uniformly by server code which uses the protocol.  We used
+# to set this to "0" if $LJ::UNICODE was false, but now we assume
+# we always want to use Unicode.
+$LJ::PROTOCOL_VER = "1";
 
 # declare views for user journals
 %LJ::viewinfo = (

etc/config.pl

@@ -221,9 +221,6 @@
       @LANGS = qw( en_DW ) if -d "$HOME/ext/dw-nonfree";
     }
 
-    # support unicode (posts in multiple languages)?  leave enabled.
-    $UNICODE = 1;
-
 
     ###
     ### Database Configuration

htdocs/export_do.bml

@@ -43,10 +43,10 @@ _c?>
         }
 
         $encoding ||= $POST{'encoding'};
-        $encoding ||= $LJ::UNICODE ? 'utf-8' : 'iso-8859-1';
+        $encoding ||= 'utf-8';
 
-        if ($LJ::UNICODE && lc($encoding) ne "utf-8" &&
-            ! Unicode::MapUTF8::utf8_supported_charset($encoding)) {
+        if ( lc($encoding) ne "utf-8" &&
+             ! Unicode::MapUTF8::utf8_supported_charset($encoding) ) {
             push @errors, $ML{'.error.encoding'};
         }
 
@@ -137,7 +137,7 @@ _c?>
                 my $eprops = $props{$e->{'ritemid'}};
 
                 # convert to UTF-8 if necessary
-                if ($LJ::UNICODE && $eprops->{'unknown8bit'} && !$opts->{'notranslation'}) {
+                if ( $eprops->{'unknown8bit'} && !$opts->{'notranslation'} ) {
                     my $error;
                     $e->{'subject'} = LJ::text_convert($e->{'subject'}, $u, \$error);
                     $e->{'event'} = LJ::text_convert($e->{'event'}, $u, \$error);
@@ -161,7 +161,7 @@ _c?>
                 # Unicode environment. In a pre-Unicode environment the chosen encoding
                 # is merely a label.
 
-                if ($LJ::UNICODE && lc($opts->{'encoding'}) ne 'utf-8' && !$opts->{'notranslation'}) {
+                if ( lc($opts->{'encoding'}) ne 'utf-8' && !$opts->{'notranslation'} ) {
                     $entry = Unicode::MapUTF8::from_utf8({-string=>$entry,
                                                           -charset=>$opts->{'encoding'}});
                 }