CentraLite 3400 Keypad

[cobirnm]

Device

• Product name: Centralite 3400 Keypad
• Manufacturer: CentraLite
• Model identifier: 3400
• Device type : Please remove all unrelated device types.
  • Other: Keypad

Screenshots

Basic

Power Configuration

Identify

Pool Control

Temperature measurement

IAS Zone

Diagnostics

[github-actions]

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

[cobirnm]

Keeping this open

[github-actions]

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

[cobirnm]

In the mean time I have had partial success on creating a DDF file that might help everyone. Right now the keypad is working with this but does not always get updated. Maybe some of the developers could have a look to see if something is wrong in the file. Never the less this might be useful
3400.zip

[Smanar]

Ha good question, I realy have no clue how is working DDF for alarm system stuff ...
But having the device in the api is just a starting point, you have take a look on the alarm system stuff ?

https://dresden-elektronik.github.io/deconz-rest-doc/endpoints/alarmsystems/#create-alarm-system

Have you set a pin0 ?

[cobirnm]

Ha good question, I realy have no clue how is working DDF for alarm system stuff ... But having the device in the api is just a starting point, you have take a look on the alarm system stuff ?

https://dresden-elektronik.github.io/deconz-rest-doc/endpoints/alarmsystems/#create-alarm-system

Have you set a pin0 ?

yes and it works. The only thing that I notice right now is that the status in the keypad only gets updated when I insert the pin in the keypad itself.
In other words when I arm or disarm the alarm on the keypad it shows the status in both the keypad and the alarm system. when I arm or disarm via api I don’t get the status in the keypad.
One more thing in order to get the status in the keypad even when arming on it I had to remove the arming delay (I set it to 0)

[Smanar]

when I arm or disarm via api I don’t get the status in the keypad

It's not normal ? This device is sleeping and just be awake when it detect someone front of it no ? So it's no possible to send request to it (I can be wrong, if someone with the device know it better than me ...)

[cobirnm]

when I arm or disarm via api I don’t get the status in the keypad

It's not normal ? This device is sleeping and just be awake when it detect someone front of it no ? So it's no possible to send request to it (I can be wrong, if someone with the device know it better than me ...)

The device has some proximity sensor that is not exposed (at least i was not able to expose it). Would it be possible to have this sensor check for the status of the alarm when triggered?

[Smanar]

Someone else have asked that, it was removed on last version #4845 (comment)

I will try to re add it on the future keypad code, but ATM new code is blocked, so will be later.

[Smanar]

OK so for information, if you make a DDF with the presence sensor, it seem it can work again #5352 (comment)

[github-actions]

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

[cobirnm]

Someone else have asked that, it was removed on last version #4845 (comment)

I will try to re add it on the future keypad code, but ATM new code is blocked, so will be later.

Do you think you can implement this? Regarding the DDF and the presence I added it and did a hot reload but it is not exposed.

[Smanar]

Can you show the DDF you are using ?
Set the status to "gold" to be sure it will be used.

[cobirnm]

@Smanar when I set the status to gold the I can't use the keypad. It changes the name to presenceXX but it does not work.
Never the less I cant get the presence sensor working or the keypad updating the status by itself.

P.S sorry for the late answer
3400.zip
.

[Smanar]

Strange your json don't look so bad, can you try with this one, put your in other folder to make tests.

{
  "schema": "devcap1.schema.json",
  "manufacturername": "CentraLite",
  "modelid": "3400",
  "product": "CentraLite 3400 Keypad",
  "sleeper": false,
  "status": "Gold",
  "subdevices": [
    {
      "type": "$TYPE_TEMPERATURE_SENSOR",
      "restapi": "/sensors",
      "uuid": [
        "$address.ext",
        "0x01",
        "0x0402"
      ],
      "fingerprint": {
        "profile": "0x0104",
        "device": "0x0401",
        "endpoint": "0x01",
        "in": [
          "0x0000",
          "0x0001",
          "0x0402"
        ]
      },
      "items": [
        {
          "name": "attr/id"
        },
        {
          "name": "attr/lastannounced"
        },
        {
          "name": "attr/lastseen"
        },
        {
          "name": "attr/manufacturername"
        },
        {
          "name": "attr/modelid"
        },
        {
          "name": "attr/name"
        },
        {
          "name": "attr/swversion"
        },
        {
          "name": "attr/type"
        },
        {
          "name": "attr/uniqueid"
        },
        {
          "name": "config/battery",
          "parse": {
            "at": "0x0020",
            "cl": "0x0001",
            "cppsrc": "power_configuration.cpp:44",
            "ep": 255,
            "eval": "const vmin = 20.0; const vmax = 30.0; let bat = Attr.val; if (bat > vmax) { bat = vmax; } else if (bat < vmin) { bat = vmin; } bat = ((bat - vmin) / (vmax - vmin)) * 100; if (bat > 100) { bat = 100; } else if (bat <= 0)  { bat = 1; } Item.val = bat;"
          }
        },
        {
          "name": "config/offset",
          "default": 0
        },
        {
          "name": "config/on"
        },
        {
          "name": "config/reachable"
        },
        {
          "name": "state/lastupdated"
        },
        {
          "name": "state/temperature",
          "description": "The current temperature in °C &times; 100.",
          "parse": {
            "at": "0x0000",
            "cl": "0x0402",
            "ep": 1,
            "eval": "Item.val = Attr.val + R.item('config/offset').val"
          },
          "default": 0
        }
      ]
    },
    {
      "type": "ZHAAncillaryControl",
      "restapi": "/sensors",
      "uuid": [
        "$address.ext",
        "0x01",
        "0x0501"
      ],
      "fingerprint": {
        "profile": "0x0104",
        "device": "0x0401",
        "endpoint": "0x01",
        "in": [
          "0x0000",
          "0x0001",
          "0x0500"
        ],
        "out": [
          "0x0501"
        ]
      },
      "items": [
        {
          "name": "attr/id"
        },
        {
          "name": "attr/lastannounced"
        },
        {
          "name": "attr/lastseen"
        },
        {
          "name": "attr/manufacturername"
        },
        {
          "name": "attr/modelid"
        },
        {
          "name": "attr/name"
        },
        {
          "name": "attr/swversion"
        },
        {
          "name": "attr/type"
        },
        {
          "name": "attr/uniqueid"
        },
        {
          "name": "config/battery",
          "description": "The current device battery level in 0&ndash;100&thinsp;%.",
          "parse": {
            "at": "0x0020",
            "cl": "0x0001",
            "cppsrc": "power_configuration.cpp:44",
            "ep": 255,
            "eval": "const vmin = 20.0; const vmax = 30.0; let bat = Attr.val; if (bat > vmax) { bat = vmax; } else if (bat < vmin) { bat = vmin; } bat = ((bat - vmin) / (vmax - vmin)) * 100; if (bat > 100) { bat = 100; } else if (bat <= 0)  { bat = 1; } Item.val = bat;"
          }
        },
        {
          "name": "config/enrolled",
          "public": false,
          "description": "State of IAS enrollment process."
        },
        {
          "name": "config/on"
        },
        {
          "name": "config/pending",
          "description": "Pending tasks to configure the device."
        },
        {
          "name": "config/reachable"
        },
        {
          "name": "state/action",
          "public": false
        },
        {
          "name": "state/lastupdated"
        },
        {
          "name": "state/lowbattery",
          "description": "True when the device battery runs low."
        },
        {
           "name":"state/panel",
           "default":"exit_delay"
        },
        {
          "name": "state/tampered",
          "description": "True when the device tampered alarm was triggered."
        }
      ]
    },
    {
      "type": "$TYPE_PRESENCE_SENSOR",
      "restapi": "/sensors",
      "uuid": [
        "$address.ext",
        "0x01",
        "0x0406"
      ],
      "items": [
        {
          "name": "attr/id"
        },
        {
          "name": "attr/lastannounced"
        },
        {
          "name": "attr/lastseen"
        },
        {
          "name": "attr/manufacturername"
        },
        {
          "name": "attr/modelid"
        },
        {
          "name": "attr/name"
        },
        {
          "name": "attr/swversion"
        },
        {
          "name": "attr/type"
        },
        {
          "name": "attr/uniqueid"
        },
        {
          "name": "config/duration"
        },
        {
          "name": "config/on"
        },
        {
          "name": "config/reachable"
        },
        {
          "name": "state/lastupdated"
        },
        {
          "name": "state/presence"
        }
      ]
    }
  ],
  "bindings": [
    {
      "bind": "unicast",
      "src.ep": 1,
      "dst.ep": 1,
      "cl": "0x0500",
      "report": [
        {
          "at": "0x0002",
          "dt": "0x19",
          "min": 300,
          "max": 3600
        }
      ]
    },
    {
      "bind": "unicast",
      "src.ep": 1,
      "dst.ep": 1,
      "cl": "0x0001",
      "report": [
        {
          "at": "0x0020",
          "dt": "0x20",
          "min": 3600,
          "max": 3600
        }
      ]
    }
  ]
}

There is not the cluster list capture, you are sure for endpoint and input/output cluster ?

      "fingerprint": {
        "profile": "0x0104",
        "device": "0x0401",
        "endpoint": "0x01",
        "in": [
          "0x0000",
          "0x0001",
          "0x0500"
        ],
        "out": [
          "0x0501"
        ]
      },

Can you show the json you have for this device on the ZHAAncillaryControl sensor ?
And the device work with the old DDF and not the new one, or need to disable all DDF ?

[cobirnm]

@Smanar I tried your DDF and it did not work (Same behavior in home assistant showing as Unknown state). The difference here is that I could not go back to the old DDF and I had to go to an entire restore of Deconz to make it work again.
Regarding the Json do you mean this:

"126": { "config": { "battery": 70, "on": true, "pending": [], "reachable": true }, "ep": 1, "etag": "89bf790091196764512bce843628177a", "lastannounced": null, "lastseen": "2022-04-02T08:06Z", "manufacturername": "CentraLite", "modelid": "3400", "name": "AncillaryControl 126", "state": { "lastupdated": "2022-04-02T07:57:23.311", "lowbattery": false, "tampered": false }, "type": "ZHAAncillaryControl", "uniqueid": "00:0d:6f:00:05:93:2a:42-01-0501"

[Smanar]

Ok, so I realy have no idea.
Your DDF is working, but stop working if you add the presence sensor ?
Can try with removing the fingerprint part ?

Edit:

      "type": "$TYPE_PRESENCE_SENSOR",
      "restapi": "/sensors",
      "uuid": [
        "$address.ext",
        "0x01",
        "0x0406"
      ],

If I m right your device don't have 0x0406 cluster ? it use the cluster 0x0500 instead no ? You can change this value using the editor, no need to edit files, but idk if the "hot reload" will correct it ...

[github-actions]

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

[github-actions]

As there has not been any response in 28 days, this issue will be closed. @ OP: If this issue is solved post what fixed it for you. If it is not solved, request to get this opened again.