Schneider Wiser devices not working in Dyna version 2.14.00

[EjvindHald]

I have tested latest release 2.14.00 Dyna where support for Wiser devices is mentioned in the release notes. There should be support for LK Fuga battery push button (see here + here) and Wiser double relay output.

I am using Conbee II USB stick with firmware 0x26720700.

The result of my test is:
The 4 button Wiser LK Fuga cannot be adopted in Phoscon.

The double relay switch appear as lights and these are working. However, there is no button events registered on the created switch device. This means usage of the push buttons cannot be detected. I have verified this using the Deconz restapi - see picture.

[close-issue-app]

Hi there.

Thank you for filing this issue. Unfortunately, we cannot help you, as you haven't sticked to the provided template and/or have not provided all information requested. Consequently, this issue has been closed.
We're more than happy to help out where we can once you raise a new issue containing all requested information in the requested format.

In this regard, please take note that:
- read the template thoroughly
- all given header lines (starting with ###) must not be deleted
- everything enclosed by <!-- --> is intended to give you guidance and should be replaced by your input specific to the issue
- Listings regarding your environment must be filled out completely where applicable (bug reports and user questions).
- Not following the template or providing insufficient information can still implicate manual closure.
- Anything that is not clearly a bug can still implicate manual closure. For support we recommend the forum: https://forum.phoscon.de

So please, first help us a bit to help you!