This service allows to connect your Violet mir:ror to Home-Assistant.
It provides a MQTT tag scanner, a binary sensor indicating the position of the mir:ror and a switch to connect/disconnect the mir:ror (using uhubctl).
MQTT discovery is fully supported, so you just need to start the service for the devices to appear in home-assistant.
- Get the docker-compose file of this repo
- Run
docker-compose up -d
- The image is available here
- Run
docker run -d --device /dev/hidraw0 -e MIRROR_MQTT_HOST="192.168.1.x" --privileged ghcr.io/droso-hass/mirror-mqtt
- Install python3, pip and uhubctl
- Run
pip3 install -r requirements.txt - Edit the configurations variables at the top of the file and run
python3 mirror.py
| Env Var | Variable | Default | Description |
|---|---|---|---|
| MIRROR_ID | ID | mirror1 | Unique ID for your mirror |
| MIRROR_USB_HUB | USB_HUB | 1-1 | id of the usb hub to control |
| MIRROR_USB_PORT | USB_PORT | 2 | the port on the usb hub to control |
| MIRROR_MQTT_HOST | MQTT_HOST | 127.0.0.1 | Address of your MQTT server |
| MIRROR_MQTT_PORT | MQTT_PORT | 1883 | Port of your MQTT server |
| MIRROR_DEV | DEV | /dev/hidraw0 | hid device corresponding to your mir:ror |
| Topic | Messages | Description |
|---|---|---|
| mirror/MIRROR_ID/tag/scan | the id of the scanned tag | fired when a tag is placed on the mir:ror |
| mirror/MIRROR_ID/usb/state | ON/OFF | the status of the usb port (if the mir:ror is connected or not) |
| mirror/MIRROR_ID/usb/set | ON/OFF | to set the status of the usb port |
| mirror/MIRROR_ID/mirror | ON/OFF | the status of the mir:ror (returned or not) |