settings.en-US.properties

settings=Settings
advancedSettings=Advanced settings
default=Default
enabled=Enabled
disabled=Disabled
error=Error
ok=OK
yes=Yes
no=No
cancel=Cancel
close=Close
back=Back
pair=Pair
done=Done
set=Set


#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Connectivity
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#

networkAndConnectivity=Network & Connectivity
airplaneMode=Airplane mode
gps=GPS

# Connectivity :: Wi-Fi
wifi=Wi-Fi
wifi-disabled=Turn Wi-Fi on to view available networks.
availableNetworks=Available networks
knownNetworks=Known networks
hiddenNetworks=Hidden networks
scanning=Searching…
scanNetworks=Search again
fullStatus-initializing      = Initializing…
fullStatus-connecting        = Connecting to {{ssid}}…
fullStatus-associated        = Obtaining an IP address…
fullStatus-connected         = Connected to {{ssid}}
fullStatus-connectingfailed  = Connection failed
fullStatus-disconnected      = Offline
shortStatus-connecting       = Connecting…
shortStatus-associated       = Obtaining an IP address…
shortStatus-connected        = Connected
shortStatus-connectingfailed = Connection failed
shortStatus-disconnected     = Offline
manageNetworks=Manage networks
joinHiddenNetwork=Join hidden network
securedBy=Secured by {{capabilities}}
security     = Security
securityNone = None
securityOpen = Open
ipAddress=IP address
linkSpeed=Link speed
linkSpeedMbs={{ linkSpeed }} Mbit/s
signalStrength = Signal strength
signalLevel0   = Very weak
signalLevel1   = Weak
signalLevel2   = Average
signalLevel3   = Good
signalLevel4   = Very good
forget=Forget
forgetNetwork=Forget network
authentication=Authentication
identity=Identifier
password=Password
showPassword=Show password
networkNotification=Network notification
networkNotification-expl=Notify me when an open network is available
macAddress=MAC address
noNetworksFound=No networks found
noKnownNetworks=No known networks

# Connectivity :: Wi-Fi :: WPS
wps=Wi-Fi protected setup
wpsMessage=Connect with WPS
fullStatus-wps-inprogress = WPS is in progress…
fullStatus-wps-canceled   = WPS was canceled
fullStatus-wps-timedout   = WPS timed out
fullStatus-wps-failed     = WPS failed
fullStatus-wps-overlapped = Another WPS PBC AP was found
wpsDescription=Automatic wireless network configuration
wpsMethodSelection=Select a WPS method:
wpsPbcLabel=Button connection
wpsMyPinLabel=My PIN connection
wpsApPinLabel=AP PIN connection
wpsPinDescription=PIN is 4 or 8 digits
wpsPinInput=Input {{pin}} to opposite device
wpsCancelMessage=Cancel WPS
wpsCancelFailedMessage=Failed to cancel WPS

# Connectivity :: Call
callSettings=Call Settings
callWaiting=Call waiting
callForwarding=Call forwarding
callForwardingUnconditional=Always forward
callForwardingMobileBusy=Forward when busy
callForwardingNoReply=Forward when unanswered
callForwardingNotReachable=Forward when unreachable
callForwardingRequesting=Requesting network info…
callForwardingQueryError=Error in query
callForwardingForwardingVoiceTo=Voice calls to
callForwardingNotForwarding=Disabled

confirmCallWaitingTitle=Unable to confirm call waiting preferences
confirmCallWaitingDesc=The device is currently unable to communicate with the carrier. Try setting the preference again.

cf-alwaysUseThisNumber=Always use this number
cf-numberWhenUnreachable=Number when unreachable
cf-numberWhenUnanswered=Number when unanswered
cf-numberWhenBusy=Number when busy

# Connectivity :: Cellular & Data
cellularAndData=Cellular & Data
dataNetwork=Carrier
dataConnectivity=Data
dataConnection=Data connection
dataRoaming=Data roaming
dataRoaming-enabled=Depending on your service agreement, extra charges may apply for data when you are in a roaming area.
dataRoaming-disabled=When entering a roaming area, your data connection will be turned off.
networkOperator=Network operator
availableOperators=Network operators in the area
operator-networkType=Network type
operator-networkType-auto=Automatic
operator-networkType-2G=2G only
operator-networkType-3G=3G only
operator-autoSelect=Automatic selection
operator-turnAutoSelectOff=Turn automatic selection off to view available network operators.
operator-status-connecting       = Connecting…
operator-status-connectingfailed = Connection failed
operator-status-connected        = Connected
apn=APN
dataSettings = Data settings
suplSettings = A-GPS settings
mmsSettings  = MMS settings
mmsport  = MMS port
mmsproxy = MMS proxy
mmsc     = MMSC
autoConfigure=Auto-configure
httpProxyHost=HTTP proxy host
httpProxyPort=HTTP proxy port
custom=(custom settings)

# Connectivity :: Bluetooth
bluetooth = Bluetooth
bluetooth-enable-msg = Turn Bluetooth on to view devices in the area.
bluetooth-paired-devices   = Paired devices
bluetooth-devices-in-area  = Devices in the area
bluetooth-visible-to-all = Visible to all
bt-status-nopaired = No devices paired
bt-status-turnoff  = Turned off
bt-status-paired = {[ plural(n) ]}
bt-status-paired[zero]  = {{name}}
bt-status-paired[one]   = {{name}}, +{{n}} more
bt-status-paired[two]   = {{name}}, +{{n}} more
bt-status-paired[few]   = {{name}}, +{{n}} more
bt-status-paired[many]  = {{name}}, +{{n}} more
bt-status-paired[other] = {{name}}, +{{n}} more
device-status-tap-connect = Tap to connect
device-status-pairing     = Pairing with device…
device-status-waiting     = Waiting for other device…
device-status-paired      = Paired
device-status-connecting  = Connecting…
device-status-connected   = Connected
device-option-unpair      = Unpair
device-option-connect     = Connect
device-option-disconnect  = Disconnect
search-for-device   = Searching for devices…
search-device       = Search for devices
rename-device       = Rename my device
unnamed-device      = Unknown device
change-phone-name   = Change phone name
bluetooth-new-name  = New name
active-pair              = Confirm devices to pair
active-pair-confirmation = To pair with {{device}}, make sure that both devices currently have the following PIN displayed:
active-pair-pincode      = To pair with {{device}}, enter the PIN on the device.
active-pair-passkey      = To pair with {{device}}, enter the passkey on the device.
passive-pair              = Bluetooth pairing request
passive-pair-confirmation = {{device}} would like to pair with this phone. To accept, make sure that both devices currently have the following PIN displayed:
passive-pair-pincode      = {{device}} would like to pair with this phone. To accept, enter the PIN on the device.
passive-pair-passkey      = {{device}} would like to pair with this phone. To accept, enter the passkey on the device.
error-pair-title      = Unable to pair devices
error-pair-pincode    = Unable to pair with the device. Check that the PIN is correct.
error-pair-toofast    = Unable to pair with the device. Too many requests.
error-connect-title   = Unable to connect devices
error-connect-msg     = Check that the device you’re trying to connect with is still in range and has Bluetooth turned on.
unpair-title = Unpair a connected device?
unpair-msg   = You are currently connected to this device. Unpairing will also disconnect from it.

# Connectivity :: Internet Sharing
internetSharing=Internet sharing
internetSharing-usb=USB
internetSharing-usb-desc=Share my phone’s Internet connection with a USB-connected device.
internetSharing-wifi=Wi-Fi
internetSharing-wifi-desc=Allow other devices to share my phone’s Internet connection by connecting via Wi-Fi.
hotspot=Hotspot
wifi-hotspot=Wi-Fi hotspot
wifi-name=Name
wifi-password=Password
wifi-security=Security
usb-tethering=USB tethering
hotspotSettings=Hotspot settings
ssid-name=SSID network name
hotspot-open=open
hotspot-wpa-psk=WPA (TKIP)
hotspot-wpa2-psk=WPA2 (AES)


#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Personalization
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#

personalization=Personalization

# Personalization :: Sound
sound=Sound
message=Message
volume=Volume
tones=Tones
select-tone=Select a tone
ringer=Ringer
ring-tones=Ringtones
alert-tones=Alert tones
volume-and-tones=Volume & Tones
other-sounds=Other sounds
alerts=Alerts
unlock-screen=Unlock screen
camera-shutter=Camera shutter
alarm-sound=Alarm
ringer-and-notification-sound=Ringer & Notifications
voice-sound=Voice

# Personalization :: Display
display=Display
brightness=Brightness
brightness-autoAdjust=Adjust automatically
lockScreen=Lock Screen
wallpaper=Wallpaper
screen-timeout=Screen timeout
one-minute   =  1 minute
two-minutes  =  2 minutes
five-minutes =  5 minutes
ten-minutes  = 10 minutes
never=never

# Personalization :: Notifications
notifications=Notifications
lockscreen-notifications=Show on lock screen

# Personalization :: Date & Time
dateAndTime=Date & Time
setTimeAutomatically=Set automatically
setTimeManually=Set manually
timezoneMessage=Time zone
dateMessage=Date
timeMessage=Time
selectTimezoneContinent=Select continent
selectTimezone=Select time zone

# Personalization :: Language & Region
languageAndRegion=Language & Region
language=Language
region=Region
sample-format=Sample Format
# see http://www.cplusplus.com/reference/clibrary/ctime/strftime/
longDateFormat=%A, %B %d, %Y

# Personalization :: Keyboard
keyboard=Keyboard
keyboardLayouts=Keyboard layouts
keypad=Keypad
vibration=Vibration
clickSound=Click sound
wordSuggestion=Word suggestion
english=English
dvorak=English (Dvorak)
spanish=Spanish
portuguese=Portuguese Brazilian
latin=Other Latin scripts
latin-desc=French, German, Norwegian (Bokmål), Slovak, Turkish
cyrillic=Cyrillic scripts
cyrillic-desc=Russian, Serbian (cyrillic)
arabic=Arabic
greek=Greek
hebrew=Hebrew
jp-kanji=Japanese
jp-kanji-desc=Kanji
traditionalChinese=Traditional Chinese
traditionalChinese-desc=Zhuyin
simplifiedChinese=Simplified Chinese
simplifiedChinese-desc=Pinyin


#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Accounts (N/A)
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#

accounts=Accounts
persona=Persona
mail=Mail


#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Security
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#

privacyAndSecurity=Privacy & Security
passcode-lock=Passcode lock
passcode-lock-desc=Passcode: {{code}}
phoneLock=Phone lock
simSecurity=SIM security

# Security :: App permissions
appPermissions=App permissions
permissions=Permissions
revoke=Revoke
ask=Ask
deny=Deny
allow=Grant
uninstallApp=Uninstall app
uninstallConfirm=Are you sure you want to uninstall {{ app }}?

# Security :: Phone Lock
phone=Phone
messages=Messages
vibrate=Vibrate
ring=Ring
change=Change
create=Create
create-passcode=Create a passcode
enter-passcode=Enter passcode
new-passcode=New passcode
current-passcode=Current passcode
incorrect-passcode=Passcode is incorrect
passcode-doesnt-match=Passcode doesn’t match. Try again.
passcode=Passcode
confirm-passcode=Confirm passcode
immediately=Immediately
after-one-minute=After 1 minute
after-five-minutes=After 5 minutes
after-fifteen-minutes=After 15 minutes
after-one-hour=After 1 hour
after-four-hours=After 4 hours
require-passcode=Require Passcode
change-passcode=Change Passcode

# Security :: SIM PIN Lock
noSimCard=No SIM card
simPin=SIM PIN
pukCode=PUK code
whatIsSimPin=What is a SIM PIN?
simPinIntro1=A SIM PIN prevents access to the SIM card cellular data networks. When it’s enabled, any device containing the SIM card will request the PIN upon restart.
simPinIntro2=A SIM PIN is not the same as the passcode used to unlock the device.
changeSimPin=Change PIN
pinTitle=Enter SIM PIN
pukTitle=Enter PUK code
newpinTitle=New PIN
pinErrorMsg=The PIN was incorrect.
pinAttemptMsg2={[ plural(n) ]}
pinAttemptMsg2[one]   = Last chance.
pinAttemptMsg2[two]   = {{n}} tries left.
pinAttemptMsg2[few]   = {{n}} tries left.
pinAttemptMsg2[many]  = {{n}} tries left.
pinAttemptMsg2[other] = {{n}} tries left.
pinLastChanceMsg=This is your last chance to enter the correct PIN. Otherwise, you must enter the PUK code to use this SIM card.
simCardLockedMsg=The SIM card is locked.
enterPukMsg=You must enter the Personal Unlocking Key (PUK) code for the SIM card. Refer to your SIM card documentation or contact your carrier for more information.
pukErrorMsg=The PUK code is incorrect.
pukAttemptMsg2=You have {{n}} tries left to enter the correct code before this SIM card will be permanently unusable. Refer to your SIM card documentation or contact your carrier for more information.
pukLastChanceMsg=Last chance to enter the correct PUK code. Your SIM card will be permanently unusable if you enter in the wrong PUK code. Refer to your SIM card documentation or contact your carrier for more information.
newSimPinMsg=Create PIN (must contain 4 to 8 digits)
confirmNewSimPinMsg=Confirm new PIN
newPinErrorMsg=PINs don’t match

# Security :: Do Not Track
doNotTrack=Do Not Track
doNotTrack-dt=How does Do Not Track work?
doNotTrack-dd1=When you turn on Do Not Track, your device tells every website and app (as well as advertisers and other content providers) that you don’t want your behavior tracked.
doNotTrack-dd2=Turning on Do Not Track won’t affect your ability to sign in to websites nor cause your device to forget your private information, such as the contents of shopping carts, location information or sign-in information.


#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#
# Device
#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#

device=Device
storage=Storage
help=Help

# Device :: Information
deviceInfo=Device information
deviceInfo-IMEI=IMEI
deviceInfo-ICCID=ICCID
deviceInfo-MSISDN=Phone number
gitInfo=Git commit info
developer=Developer
software=Software
devSettings=Developer settings
debug=Debug
grid=Grid
fps-monitor=Show frames per second
paint-flashing=Flash repainted area
log-animations=Log slow animations
dev-mode=Developer mode
remote-debugging=Remote debugging
wifi-debugging=Wi-Fi output in adb
ttl-monitor=Show time to load
console-enabled=Console enabled
model-name=Model
os-version=OS version
firmware_revision=Firmware revision
hardware_revision=Hardware revision
platform_version=Platform version
build-id=Build Identifier
update-channel=Update channel
last-updated=Last Updated
more-info=More Information
gitInfo=Git commit info
softwareUpdates=Software updates
check-update-daily     = Daily
check-update-weekly    = Weekly
check-update-monthly   = Monthly
check-for-updates      = Check for updates
check-update-now       = Check now
update-status          = Update status
checking-for-update    = Checking for updates…
no-updates             = No updates were found
retry-when-online      = Network is offline. Will check again when the network is online.
already-latest-version = This is already the latest version of {{brandShortName}}
aboutBrowserOS  = About {{brandShortName}}
browser-os-desc = {{brandShortName}} is the free and open source operating system from Mozilla. Our mission is to promote openness, innovation and opportunity by keeping the power of the Web in your hands.
learn-more=Learn More
reset-phone=Reset Phone
reset-warning-1= CAUTION: Resetting will erase all your data, including any apps you’ve purchased.
reset-warning-2= The phone will be restored to its factory condition. None of your settings or data will be saved.
# LOCALIZATION NOTE: the licensing* strings below aren’t ready for translation yet.
your-rights = Your Rights
about-your-rights-0 = {{brandShortName}} is built on free and open source software by a community of thousands from all over the world. There are a few things you should know:
about-your-rights-1 = {{brandShortName}} is made available to you under the terms of several open source licenses including the Mozilla Public License. A device running {{brandShortName}} may also contain proprietary software from third parties. Any code provided under open licenses give you the right to modify the source code and distribute your modified versions as long as you comply with their terms.
about-your-rights-2 = You are not granted any trademark rights or licenses to the trademarks of the Mozilla Foundation or any party, including without limitation the {{brandShortName}} name or logo.
about-your-rights-3 = Some features in {{brandShortName}}, such as the Crash Reporter, give you the option to provide feedback to Mozilla. By choosing to submit feedback, you give Mozilla permission to use the feedback to improve its products, to publish the feedback on its websites, and to distribute the feedback.
about-legal-info    = Legal Information
open-source-notices = Open Source Notices
about-mozilla = Mozilla
about-other   = Other
your-privacy = Your Privacy
licensing-1      = Binaries of this product have been made available to you by the Mozilla Project, under the Mozilla Public License 2.0 (MPL). Know your rights.
licensing-2      = All of the source code to this product is available under licenses that are both free and open source. Most of it is available under the Mozilla Public License 2.0 (MPL).
licensing-3      = The remainder of the software that is not under the Mozilla Public License 2.0 MPL is available under one of a variety of other licenses. Those that require reproduction of the license text in the distribution are given below. (Note: Your copy of this product may not contain code covered by one or more of the licenses listed here, depending on the exact product and version you choose.)
licensing-MPL    = Mozilla Public License 2.0
licensing-Apache = Apache License 2.0
launch-ftu=Launch first time use
no-ftu=No first time use app found

# Device :: Device storage
deviceStorage=Device storage
umsEnabled=USB mass storage enabled
umsUnplugToDisable=Unplug USB cable to disable
appStorage=Application storage
byteUnit-B  = B
byteUnit-KB = KB
byteUnit-MB = MB
byteUnit-GB = GB
byteUnit-TB = TB
storageSize = {{size}} {{unit}}
availableSize = {[ plural(size) ]}
availableSize[zero]  = {{size}} {{unit}} available
availableSize[one]   = {{size}} {{unit}} available
availableSize[two]   = {{size}} {{unit}} available
availableSize[few]   = {{size}} {{unit}} available
availableSize[many]  = {{size}} {{unit}} available
availableSize[other] = {{size}} {{unit}} available
apps-total-space=Total space
apps-used-space=Used
apps-free-space=Left
media-storage-details=Photos, videos and music are stored on the SD card. See media storage for details.

# Device :: Media storage
mediaStorage=Media storage
music-space=Music
pictures-space=Pictures
videos-space=Movies
left-space=Space left
size-not-available=Not available
no-storage=No storage found
advanced=Advanced

# Device :: Battery
battery=Battery
batteryLevel=Current level
batteryLevel-percent-unplugged = {{level}}%
batteryLevel-percent-charging  = {{level}}% (charging)
batteryLevel-percent-charged   = {{level}}% (charged)
powerSaveMode=Power save mode
powerSave-threshold={{level}}% battery left
powerSave-expl=Turning on power save mode turns off the phone’s data, Bluetooth and GPS connections to extend battery life. You can still turn these services back on manually.
turnOnAuto=Turn on automatically

# Device :: Accessibility
accessibility=Accessibility
invertColors=Invert colors
screenReader=Screen reader

# Device :: Improve Browser OS
improveBrowserOS=Improve {{brandShortName}}
sendMozillaFeedback=Send Mozilla Feedback
performanceData=Performance data
performanceDataInfo=Help us improve {{brandShortName}} by sharing data about your phone.
sharePerformanceData=Submit performance data
crashReports=Crash reports
crashReportInfo=Sending Mozilla a report when a crash occurs helps us fix the problem for everyone. Reports are sent over Wi-Fi only.
alwaysSendReport=Always send a report
neverSendReport=Never send a report
askToSendReport=Ask me when a crash occurs

# Device :: Improve Browser OS :: Crash Reports
# LOCALIZATION NOTE (crash-reports-description-*): these strings are also included in system.properties
crash-reports-description-1=A crash report contains some details about the crash and your device, as well as a snapshot of the state of your device when it crashed.
crash-reports-description-2=This may include things like open pages and apps, text typed into forms and the content of open messages, recent browsing history, or geolocation used by an open app.
# LOCALIZATION NOTE (crash-reports-description-3-*): these strings are a paragraph, with a "privacy policy"
# link in the middle. Include trailing spaces as needed.
crash-reports-description-3-start=We use crash reports to try to fix problems and improve our products. We handle your information as we describe in our
crash-reports-description-3-privacy=privacy policy
crash-reports-description-3-end=.

# Device :: Help
online-support=Online support:
call-support=Call support:
call-support-numbers={{link1}} or {{link2}}
user-guide=User guide

# Device :: SIM toolkit
operatorServices=Operator Services
operatorServices-help=Help
operatorServices-helpmenu=Help menu
operatorService-invalid-url=Cannot access the URL