pi-gen-action

This action wraps pi-gen to make it easily accessible in GitHub workflows. Generated images can subsequently be used in workflows, e.g. uploaded as build artifacts or further processed.

pi-gen is the official tool to generate Raspberry Pi OS images that can be flashed on SD cards. Refer to the pi-gen repository for detailed information on the scripts and its usage.

NOTE: This action requires a Debian-based distribution as runner (i.e. ubuntu-latest), since it invokes tools like sudo and apt-get and relies on QEMU and other Linux native components.

Default behavior

The minimum input to the action will be the image-name and the stage-list containing the list of pi-gen stages and/or custom stages. This will build all stages and export the last stage (including all previous changes) as an image.

If multiple images should be exported, disable the export-last-stage-only property and configure pi-gen's EXPORT_IMAGE in the respective stages accordingly. This will keep the default pi-gen export directives unchanged. If changes in the pi-gen internal stages are required, a custom stage at first position in the list could perform the changes in the other directories.

Outputs

image-path

If an image was built successfully, the action will set this property to point to the file. This will be located in ${{ inputs.pi-gen-dir }}/deploy.

image-noobs-path

If NOOBS build is enabled by setting ${{ inputs.enable-noobs }} to true, the property will point to the directory in pi-gen's output directory containing the build result.

How it works

The action exposes most of pi-gen's configuration properties as input variables and performs sanity checks on the given input (or assumes) default values as stated in pi-gen's README.

If user config seems valid, the action will check out the configured ref of pi-gen locally and install required host dependencies for the build.

Custom user stages (present as directories) are mounted to the build container and resolved in pi-gen's stage configuration. The custom stage should follow pi-gen's conventions to be executed properly. The action tries to make sure the stage is respected and its changes are included in the final image.

Usage

- uses: usimd/pi-gen-action@v1
  with:
    # Compression to apply on final image (either "none", "zip", "xz" or "gz").
    compression: zip

    # Compression level to be used. From 0 to 9 (refer to the tool man page for more 
    # information on this. Usually 0 is no compression but very fast, up to 9 with the 
    # best compression but very slow).
    compression-level: 6

    # Disable the renaming of the first user during the first boot. This make it so 
    # 'username' stays activated. 'username' must be set for this to work. Please be 
    # aware of the implied security risk of defining a default username and password 
    # for your devices.
    disable-first-boot-user-rename: 0

    # Additional options to include in PIGEN_DOCKER_OPTS
    docker-opts: ''

    # Set whether a NOOBS image should be built as well. If enabled, the output 
    # directory containing the NOOBS files will be saved as output variable 
    # 'image-noobs-path'.
    enable-noobs: false

    # Enable SSH access to Pi.
    enable-ssh: 0

    # If this feature is enabled, the action will configure pi-gen to not export any 
    # stage as image but the last one defined in property 'stage-list'. This is 
    # helpful when building a single image flavor (in contrast to building a 
    # lite/server and full-blown desktop image), since it speeds up the build process 
    # significantly.
    export-last-stage-only: true

    # Comma or whitespace separated list of additional packages to install on host 
    # before running pi-gen. Use this list to add any packages your custom stages may 
    # require. Note that this is not affecting the final image. In order to add 
    # additional packages, you need to add a respective 'XX-packages' file in your 
    # custom stage.
    extra-host-dependencies: ''

    # Comma or whitespace separated list of additional modules to load on host before 
    # running pi-gen. If your custom stage requires additional software or kernel 
    # modules to be loaded, add them here. Note that this is not meant to configure 
    # modules to be loaded in the target image.
    extra-host-modules: ''

    # Token to use for checking out pi-gen repo.
    github-token: ${{ github.token }}

    # Host name of the image.
    hostname: raspberrypi

    # Final image name.
    image-name: ''

    # Default keyboard keymap.
    keyboard-keymap: gb

    # Default keyboard layout.
    keyboard-layout: English (UK)

    # Default locale of the system image.
    locale: en_GB.UTF-8

    # Password of the intial user account, locked if empty.
    password: ''

    # Path where selected pi-gen ref will be checked out to. If the path does not yet 
    # exist, it will be created (including its parents).
    pi-gen-dir: pi-gen

    # The release name to use in `/etc/issue.txt`. The default should only be used for 
    # official Raspberry Pi builds.
    pi-gen-release: Raspberry Pi reference

    # GitHub repository to fetch pi-gen from, must be a fork from RPi-Distro/pi-gen.
    pi-gen-repository: RPi-Distro/pi-gen

    # Release version of pi-gen to use. This can both be a branch or tag name known in 
    # the pi-gen repository.
    pi-gen-version: arm64

    # The release version to build images against. Valid values are jessie, stretch, 
    # buster, bullseye, bookworm, and testing.
    release: bookworm

    # Setting to `1` will prevent pi-gen from dropping the "capabilities" feature. 
    # Generating the root filesystem with capabilities enabled and running it from a 
    # filesystem that does not support capabilities (like NFS) can cause issues. Only 
    # enable this if you understand what it is.
    setfcap: ''

    # List of stage name to execute in given order. Relative and absolute paths to 
    # custom stage directories are allowed here. Note that by default pi-gen exports 
    # images in stage2 (lite), stage4 and stage5. You probably want to hook in custom 
    # stages before one of the exported stages. Otherwise, the action will make sure 
    # any custom stage will include an image export directive.
    stage-list: stage0 stage1 stage2

    # System timezone.
    timezone: Europe/London

    # Use qcow2 images to reduce space and runtime requirements. _WARNING_: this is 
    # broken on recent versions of `pi-gen` and destined to be removed entirely (see 
    # https://github.com/RPi-Distro/pi-gen/pull/648).
    use-qcow2: 0

    # Name of the initial user account.
    username: pi

    # Print all output from pi-gen.
    verbose-output: false

    # Wifi country code of default network to connect to.
    wpa-country: ''

    # SSID of a default wifi network to connect to.
    wpa-essid: ''

    # Password of default wifi network to connect to.
    wpa-password: ''

Scenarios

• Install NodeJS from Nodesource in the target image
• Enable detailed output from pi-gen build
• Upload final image as artifact
• Modify pi-gen internal stages

Install NodeJS from Nodesource in the target image

jobs:
  pi-gen-nodejs:
    runs-on: ubuntu-latest
    steps:
      # Create a stage 'test-stage' instructing to add Nodesource repo and install nodejs as dependency
      - run: |
          mkdir -p test-stage/package-test &&
          {
          cat > test-stage/package-test/00-run-chroot.sh <<-EOF
          #!/bin/bash
          apt-get install -y curl
          curl -fsSL https://deb.nodesource.com/setup_16.x | bash -
          EOF
          } &&
          chmod +x test-stage/package-test/00-run-chroot.sh &&
          echo "nodejs" > test-stage/package-test/01-packages &&
          {
          cat > test-stage/prerun.sh <<-EOF
          #!/bin/bash -e
          if [ ! -d "\${ROOTFS_DIR}" ]; then
            copy_previous
          fi
          EOF
          } &&
          chmod +x test-stage/prerun.sh

      - uses: usimd/pi-gen-action@v1
        with:
          image-name: test
          stage-list: stage0 stage1 stage2 ./test-stage

Enable detailed output from pi-gen build

jobs:
  pi-gen-verbose:
    runs-on: ubuntu-latest
    steps:
      - uses: usimd/pi-gen-action@v1
        with:
          image-name: test
          verbose-output: true

Upload final image as artifact

jobs:
  pi-gen-upload-image:
    runs-on: ubuntu-latest
    steps:
      - uses: usimd/pi-gen-action@v1
        id: build
        with:
          image-name: test

      - uses: actions/upload-artifact@v3
        with:
          name: pi-gen-image
          path: ${{ steps.build.outputs.image-path }}

Modify pi-gen internal stages

In this scenario, a dummy preparation stage clean-stage is prepended to the list of stages which will remove export directives of stage4 and stage5 in the internally mounted stage volumes.

jobs:
  pi-gen-modified-stages:
    runs-on: ubuntu-latest
    steps:
      - run: |
          mkdir -p clean-stage &&
          {
          cat > clean-stage/prerun.sh <<-EOF
          #!/bin/bash
          rm -f ${{ github.workspace }}/${{ inputs.custom-pi-gen-dir }}/stage[45]/EXPORT*
          EOF
          } &&
          chmod +x clean-stage/prerun.sh

      - uses: usimd/pi-gen-action@v1
        with:
          image-name: test
          stage-list: clean-stage stage0 stage1 stage2 custom-stage stage3 stage4
          pi-gen-dir: ${{ inputs.custom-pi-gen-dir }}

License

The scripts and documentation in this project are released under the MIT License