- glue teleporting shrine
- measure out NES print
- dungeon accessories
- flat bridge
- stone river tiles
- undermountain
- start designing city in the sky
- start printing stalls/buildings for seven oasis
- start designing seven oasis
- buildings and elevated walkways
- count out tiles needed for undermountain
- add twitter and instagram links to page header on dwyerdevices
- add featured images for old posts
- fix displayed name for posts (shows dwyepasdfasdfasdf something right now)
- hex bugs track
- blue track extensions
- broken stone river
- layout of Seven Oases
- canal variations and accessories
- embankment with bollards
- embankment with slopes into water
- embankment with steps into water
- embankment with high sides
- curves
- angles
- canal bridges
- canals with railings (canals in the sky)
- wall mounted articulated arm for phone/tablet/etc
- tiles in pla (smooth stone 2x2, walls 2x2, doors) for undermountain
- more hexbug tracks
- text test piece
- catan tiles
- more jewelry
- RPGTools (Kickstarter)
- HO Scale buildings (Kickstarter)
- Ancient Rome Buildings (Kickstarter)
- War Layer/Orbital Drop (Kickstarter)
- SciFi Structures (Kickstarter - need to download when available)
- Gaming Sailing Ships (Kickstarter - need to download when available)
- Check all kickstarters
- RPG Tools
- (in library/rpgtools)
- last checked 2018/01/01
- file distribution complete
- 3D Printable Old West Buildings
- (in library/HO Scale Old West)
- last checked 2018/03/21
- on Google Drive: https://drive.google.com/drive/u/0/folders/1-ayS318NdqXHfJ5Exrg_l1fz9SlkQxp-
- Scatter Blocks
- Thingiverse released items downloaded as of 2018/03/21
- not yet available
- ShipWorks 3D Printable Ship Terrain
- not yet available
- Printable SciFi Structures - Project Mobius
- (in library/scifi structures)
- last checked 2018/02/27
- on Google Drive: https://drive.google.com/drive/u/0/folders/1TpFEtBGRnNaWaYnHiJEIrpBCuDwbYr68
- Tavern Born: 3d Printable 28mm Terrain
- not yet available
- Pre-release Carriage downloaded 2018/03/21
- last checked 2018/02/27
- Castle Project
- (in library/castle project)
- on NeFAST website: https://nefast-collection.com/
- Downloaded via coupon code on 2018/03/21
- War Layer: Oribital Drop
- (in library/War Layer)
- last checked 2018/03/21
- on Google Drive: various
- Printable Tabletop Terrain for Japan/China
- not yet available
- last checked 2018/03/11
- Printable Tabletop Terrain for Ancient Rome
- (in library/ancient rome)
- download link: https://c.1und1.de/@518088257385267780/4aLgEbD4SLqj3JU6ox0uUQ
- download pass: rome20181
- last checked 2018/02/27
Notes: to get 28mm scale, print at 127% (Cura print scale 1.27)
- Path of Osiris Extended: Egyptian Terrain
- not yet available
- last checked 2018/02/27
- Lost Islands - 3D Printable Terrain
- not yet available
- last checked 2018/03/14
- Oakenspire Adventurer level
- Forest of Oakenspire - 3D Printable Tabletop Models
- not yet available
- last checked 2018/03/14
- geometry bracelet
- airship
- vertical turbine
- judgement class capital ship
- shipyard
- gits logo
- partially finished airship
- Magnetic catan - ore
- paint rack
- China project
- Ships - Shipyard
- Ships - Scout Ship
- Ships - Mobile Ship Yard
- SHips - Civilian Ship
- Ships - Civilian Cargo Ship
- SHips - Modular Cargo Ship
- Ships - Space Station
- Ships - Leviathan
- Ships - Mobquet Transport
-
sylph
-
Storage Bins
-
Rooms and corridors (Undermountain 7)
-
Green Chocobo (finishing)
-
goblins
-
owl
-
Great Buddha
-
squishy owl
-
Ornament Tests
-
Undermountain print 4, 5, 6
-
vortex pool
-
Canals of City in the Sky
-
xmas boxes
-
iris box fail
-
air ship fail
-
Sylph (done)
-
modular container ship
-
applejack mane
-
smugglers ship
-
bell
-
Hei's Blade (printed - finishing)
-
Chocobo Feet x2 (on sd) - one more set needed
-
Ignis Scientia Blade (printed - finishing)
-
Howl's Moving Castle (printed - finishing)
-
tachikoma (sliced)
-
Mane 6 - Twilight Sparkle (in progress)
-
Mane 6 - Pinkie Pie (in progress)
-
Mane 6 - Fluttershy (in progress)
-
Mane 6 - Rarity (in progress)
-
Mane 6 - Applejack (in progress)
-
Mane 6 - Rainbow Dash (in progress)
-
Howl's Moving Castle - Top (printed - finishing)
-
Caged Arena (Undermountain 8) (slicing)
-
SciFi structures - Shipyard (sliced)
-
(here) shipyard
-
civilian cargo ship
-
civilian ship
-
leviathan carrier
-
scout ship
-
mobile ship yard
-
space station
-
container ship
-
mag tool mounts
-
Voltron - Bayard
-
Bestiary - Roc
-
Cavern River (Undermountain 9)
-
Bestiary - Hydra
-
Stronghold Gate (Undermountain 10)
-
Bestiary - Beholder
-
RPG Tools Furniture (Dungeon Accessories) !!
-
Bestiary - Demon Eagle
-
Bestiary - Hippogriff
-
Spiral Staircase (Undermountain 11)
-
RPG Tools Clock tower for City in the Sky !!
-
Dungeon Accessory - Fountain of the Alewife
-
Printing from Kickstarter series
04/08 - Space Cargo Truck 04/10 - Space Station 04/12 - Scaled Up Space Station 04/14 - Space Station Repairs 04/16 - Ships - Ulysses 04/18 - Ships - Mobile shipyard
-
dragon's horde
-
Seven Oasis' - Landing site
-
Glue test - Aleene's Original
-
Glue test - pick more glues
-
Glue test - print pieces
We had a major fuck-up with all the LFS files and cleaning the repo history, and long story short, all of the repo links are broken, and now need to point to https://github.com/dwyerdevices/projects
Wait - we have gcode on the SDCard!
Glue Date: 2017/11/05
Test Date: -
Airship - Exploratis: https://www.thingiverse.com/thing:2817385/ Airship - Simple Airship: https://www.thingiverse.com/thing:2809997/
SW - YT-class Interceptor: https://www.thingiverse.com/thing:2792775/ SW - Corellian Light Freighter: https://www.thingiverse.com/thing:2790751 SW - YT-90 Heavy Freighter: https://www.thingiverse.com/thing:2788655 SW - Nubian Pod Racer: https://www.thingiverse.com/thing:2823783
Serenity: https://www.thingiverse.com/thing:2601098/
Frigate - https://www.thingiverse.com/thing:2480390 Escort Ship - https://www.thingiverse.com/thing:2480377
Transport - https://www.thingiverse.com/thing:550483
Mechanius Cruiser - https://www.thingiverse.com/thing:2579519 Star Citizen 300i - https://www.thingiverse.com/thing:335767 SpaceX BFR - https://www.thingiverse.com/thing:2565361 Wipeout Pod Racer - https://www.thingiverse.com/thing:2348633 Star Wars / Toscan Fighter - https://www.thingiverse.com/thing:1582643 Star Wars / Interdictor Cruiser - https://www.thingiverse.com/thing:812945 Star Wars / First Order Dreadnought - https://www.thingiverse.com/thing:2742289
Star Wars / Vader Pod Racer - https://www.thingiverse.com/thing:2448998 SWTOR / Destroyer - https://www.thingiverse.com/thing:1112084 SW / Assault Frigate - https://www.thingiverse.com/thing:1778455 Republic Light Cruiser - https://www.thingiverse.com/thing:1955461 Star Wars / Millenium Falcon - https://www.thingiverse.com/thing:919475
The 10 year old wanted to print a pink wolf for a friend at school. What better than a Game of Thrones style wolf head?
Source: House Stark Game of Thrones Maker: Ricardo Alves License: Download, Print, Share, Maintain Model: All Files Scale: 2000% (X,Y), 2500% (Z) Final Size: 96.1mm x 70.0mm x 7.0mm Material: Inland Pink PLA 1.75mm Print Date: 2018/03/20 Print Time: Estimated Print Time: 6 hours 11 minutes Estimated Filament: 3.9 meters Slicer: Cura 3.2 Slicer Settings:
- 0.05mm
- 40% infill
- Build plate adhesion
A school friend of the 10 year old likes the color pink and Unikitty. For a kindness project, we're tackling both by printing up a multi-color Unikitty!
Source: lego movie - Unikitty Maker: thereturnofthewill Model: All Files License: Creative Commons - Attribution Scale: 175% Materials:
- body: pink
- ear x2: light purple
- chin: white
- head: pink
- hoof blue: turquoise
- hoof top x2: white
- hoof yellow: dandelion yellow
- horn: turquoise
- neck: peak green
- tail: blue
- button: white
Print Date: 2018/04/05 - ? Print Time:
- body:
- ear x2:
- chin:
- head:
- hoof blue:
- hoof top x2:
- hoof yellow:
- horn:
- neck:
- tail:
- button:
Estimated Print Time:
- body: 1 hour 42 minutes
- ear x2: 55 minutes
- chin: 57 minutes
- head: 1 hour 53 minutes
- hoof blue: 25 minutes
- hoof top x2: 43 minutes
- hoof yellow: 25 minutes
- horn: 13 minutes
- neck: 17 minutes
- tail: 1 hour 4 minutes
- button: 23 minutes
Estimated Filament:
- body: 1.6 meters
- ear x2: 0.7 meters
- chin: 0.8 meters
- head: 2.1 meters
- hoof blue: 0.3 meters
- hoof top x2: 0.6 meters
- hoof yellow: 0.3 meters
- horn: 0.1 meters
- neck: 0.2 meters
- tail: 1.1 meters
- button: 0.3 meters
Slicer: Cura 3.2 Slicer Settings:
- 0.06mm layers
- 20% infill
- supports
- brim
Quick print of a protractor for a homework assignment to measure various angles.
Source: Protractor Maker: mistertech Model: Proctractor.stl License: Creative Commons - Attribution Material: Hatchbox Red PLA 1.75mm Scale: 50% Print Date: 2018/04/04 Print Time: Estimated Print Time: 40 minutes Estimated Filament: 1.1 meters Slicer: Cura 3.2 Slicer Settings:
- 0.10mm layers
- 100% infill
- brim
Source: Maker: patricknevindwyer Models: all models License: Creative Commons - Attribution - Share-alike Material:
- Top/Bottom: Pxmalion Clear PLA 1.75mm
- Pip: Inland Peak Green PLA 1.75mm
Print Date: 2018/04/? Print Time:
- Top:
- Bottom:
- Pip x21:
Estimated Print Time:
- Top: 1 hour 35 minutes
- Bottom: 6 hours 55 minutes
- Pip x21: 45 minutes
Estimated Filament:
- Top: 3.0 meters
- Bottom: 9.9 meters
- Pip x21: 1.26 meters
Slicer: Cura 3.2 Slicer Settings:
- 0.10mm layers
- 20% infill
- supports
- raft
From war layer/crate-transport/
a double transport vehicle. Wheel x10 and Axel x5 failed - one of the
wheels kept coming loose while printing. Trying without raft, and two wheels at a time.
Maker: War Layer License: Model:
- carrier back:
- carrier body:
- normal wheel x10:
- normal wheel x2:
- axel x5:
Scale: 50% Material:
- carrier back:
- carrier body:
- normal wheel x10:
- normal wheel x2:
- axel x5:
Print Date: Print Time:
- carrier back:
- carrier body:
- normal wheel x10:
- normal wheel x2:
- axel x5:
Estimated Print Time:
- carrier back: 4 hours 46 minutes
- carrier body: 8 hours 57 minutes
- normal wheel x10: 10 hours 46 minutes
- normal wheel x2: 2 hours 2 minutes
- axel x5: 1 hour 25 minutes
Estimated Filament:
- carrier back: 4.1 meters
- carrier body: 7.8 meters
- normal wheel x10: 7.6 meters
- normal wheel x2: 1.34 meters
- axel x5: 0.9 meters
Slicer: Cura 3.2 Slicer Settings:
- 0.06mm layers
- 20% infill
- raft (not wheels or axels)
- brim (wheels and axels)
- supports everywhere
https://www.thingiverse.com/thing:1112084
Scaled down to 10%, rotated 90° around Z axis
Fail - parts are too thin/delicate at 10% scale.
Source: Star Wars The Old Republic Destroyer Maker: Gargi License: Creative Commons - Attribution Model:
Scale: 10% Final Size: 80.8mm x 24.7mm x 26.4mm Material: Print Date: 2018/03/? Print Time:
- Cut 1:
- Cut 2:
Estimated Print Time:
- Cut 1: 2 hours 29 minutes
- Cut 2: 2 hours 29 minutes
Estimated Filament:
- Cut 1: 2 meters
- Cut 2: 2 meters
Sclier: Cura 3.2 Slicer Settings:
- 0.06mm layers
- 40% infill
- raft
- supports everywhere
- tree supports
Source: Star Wars the Old Republic Smuggler Ship Maker: Gargi License: Creative Commons - Attribution Model: All Files Scale: 30% Final Size:
- cut 1: 45.7mm x 14.7mm x 21.3mm
- cut 2: 47.8mm x 15.3mm x 33.6mm
Material: Print Date: Print Time:
- cut 1:
- cut 2:
Estimated Print Time:
- cut 1: 1 hour 52 minutes
- cut 2: 2 hours 20 minutes
Estimated Filament:
- cut 1: 1.3 meters
- cut 2: 1.5 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 30% infill
- raft support
- supports touching build plate
- support pattern: lines
Source: Mobquet Transport Maker: Avioza License: Creative Commons - Attribution - Share-alike Model: Mobquet_Union__repaired_.stl Scale: 1250% Final Size: 27.2mm x 95.3mm x 33.5mm Material: Print Date: 2018/03/10 Print Time: 7 hours 44 minutes Estimated Print Time: 8 hours 6 minutes Estimated Filament: 7.9 meters Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- Generate Supports
- Support pattern: lines
- Build plate adhesion: raft
- 1st print using a raft air gap 0f 0.3mm
- 2nd print using a raft air gap of 0.4mm
Experiment with a wall mounted magnetic attachment point for hanging metal tools. Uses 3mm or larger magnetic balls, which float in the assembled mounting. Has a variable width screw/nail mounting hole on the back. Assmebled with glue.
Models:
- mount:
- back:
- front:
Material: Hatchbox Yellow PLA 1.75mm Print Date: 2018/03/? Print Time:
- mount:
- back:
- front:
Estimated Print Time:
- mount: 29 minutes
- back: 20 minutes
- front: 20 minutes
Estimated Filament:
- mount: 1.2 meters
- back: 0.9 meters
- front: 0.9 meters
Slicer: Cura 3 Slicer Settings:
- 0.15mm layers
- 20% infill
- build plate adhesion
- no supports
Going through the various Kickstarter projects we've backed recently, picking some models from each to print and test out. From the SciFi Structures Kickstarter, the civilian_cargo_ship.stl
Source: SciFi Structures - All Spaceships Pack Maker: Model: civilian_cargo_ship.stl License: Material: Inland Silver PLA 1.75mm Scale: 100% Final Size: 10.2mm x 46.9mm x 15.1mm Print Date: 2018/03/04 Print Time: 1 hour 44 minutes Estimated Print Time: 1 hour 53 minutes Estimated Filament: 1.5 meters Slicer: Cura 3 Slicer Settings:
- generate support
- build plate adhesion
- 50% infill
- 0.06mm layers
Going through the various Kickstarter projects we've backed recently, picking some models from each to print and test out. From the SciFi Structures Kickstarter, the civilian_space_craft.stl
Source: SciFi Structures - All Spaceships Pack Maker: Model: civilian_space_craft.stl License: Material: Inland Silver PLA 1.75mm Scale: 100% Final Size: 12.5mm x 45.5mm x 10.0mm Print Date: 2018/03/04 Print Time: 49 minutes Estimated Print Time: 51 minutes Estimated Filament: 0.6 meters Slicer: Cura 3 Slicer Settings:
- generate support
- build plate adhesion
- 50% infill
- 0.06mm layers
Going through the various Kickstarter projects we've backed recently, picking some models from each to print and test out. From the SciFi Structures Kickstarter, the Leviathan Class Space Carrier - The Duke.stl
Source: SciFi Structures - All Spaceships Pack Maker: Model: Leviathan Class Space Carrier - The Duke.stl License: Material: Inland Silver PLA 1.75mm Scale: 100% Final Size: 23.0mm x 71.2mm x 7.9mm Print Date: 2018/03/? Print Time: 3 hours 46 minutes Estimated Print Time: 4 hours 4 minutes Estimated Filament: 2.7 meters Slicer: Cura 3 Slicer Settings:
- generate support
- build plate adhesion
- 50% infill
- 0.06mm layers
Going through the various Kickstarter projects we've backed recently, picking some models from each to print and test out. From the SciFi Structures Kickstarter, the raven class scout ship.stl
Source: SciFi Structures - All Spaceships Pack Maker: Model: raven class scout ship.stl License: Material: Inland Silver PLA 1.75mm Scale: 100% Final Size: 8.8mm x 50.9mm x 12.6mm Print Date: 2018/03/? Print Time: 1 hour 23 minutes Estimated Print Time: 1 hour 30 minutes Estimated Filament: 1.1 meters Slicer: Cura 3 Slicer Settings:
- generate support
- build plate adhesion
- 50% infill
- 0.06mm layers
This ship is from MyMiniFactory user Currahee; a modular cargo ship.
Source: Modular Container Ship 1 Maker: currahee Model: All Files License: Download - Print - Share - Maintain Material: Inland Silver PLA 1.75mm Scale: 150% Final Size: Print Date: 2018/03/11 Print Time: 2 hours 30 minutes Estimated Print Time: 2 hours 40 minutes Estimated Filament: 6 meters Slicer: Cura 3 Slicer Settings:
- no support
- no adhesion
- 40% infill
- 0.15mm layers
Going through the various Kickstarter projects we've backed recently, picking some models from each to print and test out. From the SciFi Structures Kickstarter, the shiyard_stretch_goal_4.stl
First pass print, at 0.4mm layers, was a failure: that's the absolute uppper limit for the current nozzle on the Prusa, and layer adhesion and consistency was messy. Without plate adhesion in a brim, the messy layering for the base pulled up from the plate. Reslicing with slightly better quality, at a premium of greatly extended print time.
Source: SciFi Structures - Printable Structures Pack Maker: Model: shipyard_stretch_goal_4_.stl License: Material: Inland Dandelion PLA 1.75mm Scale: 100% Final Size: 100.0mm x 60.3mm x 66.3mm Print Date: 2018/03/? Print Time: 6 hours 6 minutes Estimated Print Time: 6 hours 33 minutes Estimated Filament: 19.0 meters Slicer: Cura 3 Slicer Settings:
- generate support
- plate adhesion
- 30% infill
- 0.2mm layers
2018/03/01 - 2018/03/11
china house icon.stl x5
- resized x axis to 15mm
- print time: 17 minutes
- estimated print time: 16 minutes
- 0.4 meters
china great wall piece.stl x10
- resized x axis to 2cm wide
- resized x axis to 4cm wide (2nd pass)
- print time: 52 minutes
- print time: 3 hours 18 minutes
- estimated print time @ 2cm: 55 minutes
- esitmated print time @ 4cm: 3 hours 31 minutes
- estimated filament @ 2cm: 1.1 meters
- estimated filament @ 4cm: 5.0 meters
china great wall piece 2.stl x6
- resized y axis to 5mm
- no resizing (2nd pass)
- print time: 29 minutes
- print time: 2 hours 2 minutes
- estimated print time: 30 minutes
- estimated print time (2nd pass): 2 hours 10 minutes
- estimated filament: 0.5 meters
- estimated filament (2nd pass): 2.5 meters
open book.stl
- material: Prusa White PLA 1.75mm
- scaled 150%
- print time: 35 minutes
- estimated print time: 35 minutes
- estimated filament: 1.1 meters
crown.stl
- gold
- 150% scale
- 0.10mm layers
- 90% infill
- print time: 17 minutes
- estimated print time: 16 minutes
- estimated filament: 0.3 meters
throne.stl
- material: Hatchbox Red PLA 1.75mm
- rotated 270° around x-axis
- scaled 300%
- 0.20mm layers
- print time: 2 hours 1 minute
- estimated print time: 2 hours 4 minutes
- estimated filament: 8.2 meters
bell.stl
- 0.20mm layers
- 20% infill
- generate support
- plate adhesion: brim
- material: Tianse Bronze PLA 1.75mm
- print time: 4 hours 49 minutes
- estimated print time: 5 hours 5 minutes
- estimated filament: 18.8 meters
20% infill 0.10mm layers
Printing the D series of parts for assembly. Not using the solid base variants.
Source: Tachikoma (Ghost in the Shell) Maker: paranoid_android License: Creative Commons - Attribution Model: All Files Material:
- Inland Egyptian Blue PLA 1.75mm
- Prusa White PLA 1.75mm (Leg Part 04A)
Final Size: Print Date: 2018/02/ Print Time: ? total
- Abdomen Part 01:
- Abdomen Part 02:
- Abdomen Part 03:
- Abdomen Part 04:
- Abdomen Part 05:
- Alignment Pin x6:
- Arm Part 01 x2:
- Arm Part 02/03/04:
- Canon Part 01/02:
- Head Part 01:
- Head Part 02:
- Head Part 03 x4:
- Head Part 04:
- Leg Part 01 x4:
- Leg Part 02 x4:
- Leg Part 03 x4:
- Leg Part 04A x4:
Estimated Print Time: ? total
- Abdomen Part 01: 11 hours 39 minutes
- Abdomen Part 02: 18 hours 17 minutes
- Abdomen Part 03: 1 hour 1 minute
- Abdomen Part 04: 56 minutes
- Abdomen Part 05: 57 minutes
- Alignment Pin x6: 51 minutes
- Arm Part 01 x2: 1 hour 2 minutes
- Arm Part 02/03/04: 2 hours 8 minutes
- Canon Part 01/02: 1 hour 13 minutes
- Head Part 01: 6 hours 34 minutes
- Head Part 02: 4 hours 27 minutes
- Head Part 03 x4: 2 hours 26 minutes
- Head Part 04: 59 minutes
- Leg Part 01 x4: 2 hours 16 minutes
- Leg Part 02 x4: 10 hours 26 minutes
- Leg Part 03 x4: 5 hours 28 minutes
- Leg Part 04A x4: 2 hours 25 minutes
Estimated Filament: ? meters
- Abdomen Part 01: 10.3 meters
- Abdomen Part 02: 18.1 meters
- Abdomen Part 03: 0.9 meters
- Abdomen Part 04: 0.8 meters
- Abdomen Part 05: 0.8 meters
- Alignment Pin x6: 0.6 meters
- Arm Part 01 x2: 0.9 meters
- Arm Part 02/03/04: 1.5 meters
- Canon Part 01/02: 0.9 meters
- Head Part 01: 6.3 meters
- Head Part 02: 3.8 meters
- Head Part 03 x4: 1.8 meters
- Head Part 04: 0.3 meters
- Leg Part 01 x4: 2 meters
- Leg Part 02 x4: 8.4 meters
- Leg Part 03 x4: 3.6 meters
- Leg Part 04A x4: 1.5 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- Supports
flipped the mane upside down.
Source: Twilight Sparkle - MLP:FIM Maker: plenet License: Creative Commons - Attribution - Share Alike Model: All Files Material:
- Body: AIO Robotics Light Blue PLA 1.75mm
- Mane: Tianse Purple PLA 1.75mm
- Tail: Tianse Purple PLA 1.75mm
- Eyes: Prusa White PLA 1.75mm
Scale: 250% Print Date: 2018/02/ Print Time:
- Body:
- Mane:
- Tail:
- Eyes:
Estimated Print Time: 22 hours 31 minutes
- Body: 12 hours 1 minute
- Mane: 4 hours 34 minutes
- Tail: 3 hours 40 minutes
- Eyes: 23 minutes
Estimated Filament: 21.5 meters
- Body: 11.7 meters
- Mane: 3.4 meters
- Tail: 3.6 meters
- Eyes: 0.2 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- Supports
- Mane:
- supports from everywhere
- tree supports
- raft
- raft air gap 0.3mm
- experimental tree support
Flipped mane upside down.
Source: Pinkie Pie - MLP:FIM Maker: plenet License: Creative Commons - Attribution - Share Alike Model: All Files Material:
- Body: Inland Pink PLA 1.75mm
- Mane: Hatchbox Red PLA 1.75mm
- Tail: Hatchbox Red PLA 1.75mm
- Eyes: Prusa White PLA 1.75mm
Scale: 250% Print Date: 2018/02/ Print Time:
- Body:
- Mane:
- Tail:
- Eyes:
Estimated Print Time: 18 hours 23 minutes
- Body: 9 hours 46 minutes
- Mane: 9 hours 40 minutes
- Tail: 6 hours 3 minutes
- Eyes: 23 minutes
Estimated Filament: 25 meters
- Body: 10 meters
- Mane: 8.8 meters
- Tail: 6.9 meters
- Eyes: 0.2 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- Supports
- Mane and Tail:
- supports from everywhere
- tree supports
- raft
- raft air gap 0.3mm
- experimental tree support
Flipped mane upside down.
Source: Fluttershy - MLP:FIM Maker: plenet License: Creative Commons - Attribution - Share Alike Model: All Files Material:
- Body: Inland Dandelion PLA 1.75mm
- Mane: Inland Pink PLA 1.75mm
- Tail: Inland Pink PLA 1.75mm
- Eyes: Prusa White PLA 1.75mm
Scale: 250% Print Date: 2018/02/ Print Time:
- Body:
- Mane:
- Tail:
- Eyes:
Estimated Print Time:
- Body: 11 hours 51 minutes
- Mane: 9 hours 27 minutes
- Tail: 4 hours 10 minutes
- Eyes: 23 minutes
Estimated Filament: meters
- Body: 11.6 meters
- Mane: 8.7 meters
- Tail: 4.3 meters
- Eyes: 0.2 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- Supports
- Mane:
- supports from everywhere
- tree supports
- raft
- raft air gap 0.3mm
- experimental tree support
Flipped mane upside down.
Source: Rarity - MLP:FIM Maker: plenet License: Creative Commons - Attribution - Share Alike Model: All Files Material:
- Body: Prusa White PLA 1.75mm
- Mane: Inland Egyptian Blue 1.75mm
- Tail: Inland Egyptian Blue 1.75mm
- Eyes: Prusa White PLA 1.75mm
Scale: 250% Print Date: 2018/02/ Print Time:
- Body:
- Mane:
- Tail:
- Eyes:
Estimated Print Time: 23 hours 15 minutes
- Body: 9 hours 54 minutes
- Mane: 9 hours 45 minutes
- Tail: 4 hours 12 minutes
- Eyes: 23 minutes
Estimated Filament: 23.2 meters
- Body: 10.1 meters
- Mane: 8.9 meters
- Tail: 3.4 meters
- Eyes: 0.2 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- Supports
- Mane:
- supports from everywhere
- tree supports
- raft
- raft air gap 0.3mm
- experimental tree support
For mane:
Attempt 1: scaled as is fail
Attempt 2: Flipped mane upside down fail
Attempt 3: Flipped mane upside down, raft, tree supports
Hat as is failed. Added brim and tree supports, and cranking down the layer size to save time, as I need to assemble the final versions in the next few hours.
Source: Applejack - MLP:FIM Maker: plenet License: Creative Commons - Attribution - Share Alike Model: All Files Material:
- Body: Tianse Orange PLA 1.75mm
- Mane: Inland Dandelion PLA 1.75mm
- Hat: Inland Light Brown PLA 1.75mm
- Tail: Inland Dandelion PLA 1.75mm
- Eyes: Prusa White PLA 1.75mm
Scale: 250% Print Date: 2018/02/ Print Time:
- Body:
- Mane:
- Hat:
- Tail:
- Eyes:
Estimated Print Time: 25 hours 28 minutes
- Body: 9 hours 44 minutes
- Mane: 5 hours 24 minutes
- Hat: 2 hours 17 minutes
- Tail: 3 hours 34 minutes
- Eyes: 23 minutes
Estimated Filament: 25.2 meters
- Body: 10 meters
- Mane: 4.2 meters
- Hat: 5.6 meters
- Tail: 3.7 meters
- Eyes: 0.2 meters
Slicer: Cura 3 Slicer Settings:
- Hat: 0.15mm layers
- Others: 0.06mm layers
- 20% infill
- Mane and Hat:
- supports from everywhere
- tree supports
- raft
- raft air gap 0.3mm
- experimental tree support
Printing the mane pieces upside down. Except for the pink mane, which was rotated 75° around the X axis
Source: Rainbow Dash - MLP:FIM Maker: plenet License: Creative Commons - Attribution - Share Alike Model: All Files Material:
- Body: Inland Turquoise PLA 1.75mm
- Mane Blue: Inland Egyptian Blue PLA 1.75mm
- Mane Green: Inland Peak Green PLA 1.75mm
- Mane Orange: Tianse Orange PLA 1.75mm
- Mane Pink: Inland Ping PLA 1.75mm
- Mane Red: Hatchbox Red PLA 1.75mm
- Mane Yellow: Inland Dandelion PLA 1.75mm
- Tail Blue: Inland Egyptian Blue PLA 1.75mm
- Tail Green: Inland Peak Green PLA 1.75mm
- Tail Orange: Tianse Orange PLA 1.75mm
- Tail Red: Hatchbox Red PLA 1.75mm
- Tail Yellow: Inland Dandelion PLA 1.75mm
- Eyes: Prusa White PLA 1.75mm
Scale: 250% Print Date: 2018/02/07 - Print Time:
- Body:
- Mane Blue:
- Mane Green:
- Mane Orange:
- Mane Pink:
- Mane Red:
- Mane Yellow:
- Tail Blue:
- Tail Green:
- Tail Orange:
- Tail Red:
- Tail Yellow:
- Eyes:
- Eyes x6:
Estimated Print Time: 34 hours 39 minutes
- Body: 20 hours 8 minutes
- Mane Blue: 40 minutes
- Mane Green: 34 minutes
- Mane Orange: 1 hour 34 minutes
- Mane Pink: 45 minutes
- Mane Red: 1 hour 24 minutes
- Mane Yellow: 1 hour 3 minutes
- Tail Blue: 1 hour 17 minutes
- Tail Green: 1 hour 55 minutes
- Tail Orange: 54 minutes
- Tail Red: 56 minutes
- Tail Yellow: 2 hours
- Eyes: 23 minutes
- Eyes x6: 2 hours 22 minutes
Estimated Filament: 31.3 meters
- Body: 19.6 meters
- Mane Blue: 0.5 meters
- Mane Green: 0.5 meters
- Mane Orange: 1.3 meters
- Mane Pink: 0.7 meters
- Mane Red: 1.2 meters
- Mane Yellow: 0.9 meters
- Tail Blue: 0.9 meters
- Tail Green: 1.5 meters
- Tail Orange: 0.6 meters
- Tail Red: 0.7 meter
- Tail Yellow: 1.5 meters
- Eyes: 0.2 meters
- Eyes x6: 2 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- Supports
- Mane, Tail, Eyes:
- supports from everywhere
- tree supports
- raft
- raft air gap 0.3mm
- experimental tree support
Top Printing: https://www.instagram.com/p/BfTI6bSAIYA/?taken-by=dwyerdevices
Bottom and pieces printed: https://www.instagram.com/p/BevO7KEgBNI/?taken-by=dwyerdevices
Top Printed: https://www.instagram.com/p/BfTiRYagZ15/?taken-by=dwyerdevices
Top First Cleaning: https://www.instagram.com/p/BfWjiQaAuTQ/?taken-by=dwyerdevices
Top needs to be rotated 90° around the Z axis to fit the build volume of the Prusa i3 mk2.
Source: Howl's Moving Castle Maker: Mag-Net License: Download - Print - Share - Remix - Non-commercial Model: All Materials: Print Date: 2018/ Size:
- base: 84.0mm x 156.0mm x 52.0mm
- ears: 29.0mm x 100.2mm x 17.0mm
- eyes: 12.5mm x 26.0mm x 24.6mm
- feet: 35.8mm x 50.5mm x 4.8mm
- mortar and pestle: 12.5mm x 9.1mm x 15.0mm
- tongue: 22.8mm x 17.2mm x 19.5mm
- top: 112.0mm x 208.0mm x 192.0mm
- wings: 28.8mm x 54.5mm x 56.5mm
Print Time:
- base: 24 hours 54 minutes
- ears: 5 hours
- eyes: 34 minutes
- feet: 41 minutes
- mortar and pestle: 18 minutes
- tongue: 41 minutes
- top: 120 hours 34 minutes
- wings: 4 hours
Estimated Print Time:
- base: 25 hours 58 minutes
- ears: 5 hours 14 minutes
- eyes: 47 minutes
- feet: 30 minutes
- mortar and pestle: 17 minutes
- tongue: 39 minutes
- top: 127 hours 56 minutes
- wings: 4 hours 9 minutes
Estimated Filament:
- base: 23.4 meters
- ears: 4 meters
- eyes: 0.5 meters
- feet: 0.3 meters
- mortar and pestle: 0.1 meters
- tongue: 0.6 meters
- top: 134.2 meters
- wings: 2.5 meters
Slicer: Cura 3 Slicer Settings:
- 0.06mm Layers
- 20% Infill
- Supports
! Files already downloaded
Source: Fountain of the Alewife Maker: Curufin License: Creative Commons - Attribution - Non-commercial Model: All Files Material: Final Size: Print Date: 2018/ Print Time: Estimated Print Time: ? Estimated Filament: ? meters Slicer: Cura 3 Slicer Settings:
! Files already downloaded
Source: Hippogriff Maker: Harrison Baere License: Creative Commons - Attribution - Share Alike Model: All Files Material: Final Size: Print Date: 2018/ Print Time: Estimated Print Time: ? Estimated Filament: ? meters Slicer: Cura 3 Slicer Settings:
! Files already downloaded
Source: Demon Eagle Maker: Harrison Baere License: Creative Commons - Attribution - Share Alike Model: All Files Material: Final Size: Print Date: 2018/ Print Time: Estimated Print Time: ? Estimated Filament: ? meters Slicer: Cura 3 Slicer Settings:
! Files already downloaded
Source: Zombie Beholder Maker: Harrison Baere License: Creative Commons - Attribution - Share Alike Model: All Files Material: Final Size: Print Date: 2018/ Print Time: Estimated Print Time: ? Estimated Filament: ? meters Slicer: Cura 3 Slicer Settings:
! Files already downloaded
Source: Hydra Maker: Harrison Baere License: Creative Commons - Attribution - Share Alike Model: All Files Material: Final Size: Print Date: 2018/ Print Time: Estimated Print Time: ? Estimated Filament: ? meters Slicer: Cura 3 Slicer Settings:
! Files already downloaded
Source: Roc Maker: Harrison Baere License: Creative Commons - Attribution - Share Alike Model: All Files Material: Final Size: Print Date: 2018/ Print Time: Estimated Print Time: ? Estimated Filament: ? meters Slicer: Cura 3 Slicer Settings:
! Files already downloaded
Source: Voltron Legendary Defender- Paladin Bayard Maker: LittleCorvidae License: Design, Print, Share, Maintain, Remix, Non-commercial Model: All Files Material: Final Size: Print Date: 2018/ Print Time: Estimated Print Time: ? Estimated Filament: ? meters Slicer: Cura 3 Slicer Settings:
Already sliced
Time comparisons:
- guard 2: 100 microns = 8 hours 16 minutes, 60 microns = 16 hours 20 minutes
- blade 1: 100 microns = 9 hours 13 minutes, 60 microns = 15 hours 32 minutes
so 932 / 592 = 1.57 and 980 / 496 = 1.98, let's call it ~1.75x more time to go to 60 microns, which would be just shy of 100 hours of print time at 50 microns, vs ~56 hours at 100 microns.
First clean up: https://www.instagram.com/p/BeeFvj4gu0v/?taken-by=dwyerdevices
Dry fit: https://www.instagram.com/p/BeeF-Ung6N2/?taken-by=dwyerdevices
Source: Ignis Scientia Dagger Replica Maker: PowerUpProps License: Design, Print, Share, Maintain, Remix, Non-commercial Model: All Files Material:
- Emblem: Inland Egyptian Blue PLA 1.75mm
- All others: Prusa White PLA 1.75mm
Final Size: Print Date: 2018/01/26-28 Print Time: ? total
- blade cross 1: 7 hours 20 minutes
- blade cross 2: 6 hours 7 minutes
- blade 1: 8 hours 50 minutes
- blade 2: 6 hours 7 minutes
- emblem: 23 minutes
- handle 1: 3 hours 50 minutes
- handle 2: 4 hours
- guard 1: 8 hours 32 minutes
- guard 2: 7 housr 54 minutes
Estimated Print Time: 55 hours 48 minutes total
- blade cross 1: 7 hours 38 minutes
- blade cross 2: 7 hours 5 minutes
- blade 1: 9 hours 13 minutes
- blade 2: 6 hours 18 minutes
- emblem: 22 minutes
- handle 1: 3 hours 55 minutes
- handle 2: 4 hours 8 minutes
- guard 1: 8 hours 53 minutes
- guard 2: 8 hours 16 minutes
Estimated Filament: ? meters total
- blade cross 1: 13.3 meters
- blade cross 2: 11.5 meters
- blade 1: 13.3 meters
- blade 2: 9.2 meters
- emblem: 0.7 meters
- handle 1: 7.7 meters
- handle 2: 8.2 meters
- guard 1: 15.9 meters
- guard 2: 14.2 meters
Slicer: Cura 3 Slicer Settings:
- Supports
- 20% infill
- 0.10mm layers
Post print: https://www.instagram.com/p/BeHDhElAaXw/?taken-by=dwyerdevices
Dry fit: https://www.instagram.com/p/BeNyxdGAxF9/?taken-by=dwyerdevices
Source: Hei's Dagger Maker: Subzerofusion License: Creative Commons - Attribution - Share Alike Materials:
- blade: Inland Silver PLA 1.75mm
- hilt 1: Prusa White PLA 1.75mm
- hilt 2: Prusa White PLA 1.75mm
Final Size:
- blade: 219.7mm x 134.5mm x 2.5mm
- hilt 1: 157.3mm x 66.3mm x 10mm
- hilt 2: 157.3mm x 66.3mm x 5mm
Print Time:
- blade: 8 hours 11 minutes
- hilt 1: 1 hours 34 minutes
- hilt 2: 1 hours 3 minutes
Estimated Print Time:
- blade: 8 hours 27 minutes
- hilt 1: 1 hour 35 minutes
- hilt 2: 1 hour 2 minutes
Estimated Filament:
- blade: 5.3 meters
- hilt 1: 6.2 meters
- hilt 2: 3.9 meters
Slicer: Cura
Slicer Settings:
- 0.06mm layers for blade / 0.20mm layers for hilt
- 20% infill
- supports
Source: Geometry Bracelet Maker: thomasasers License: Creative Commons - Attribution - Non-commercial - Share-alike Model: Geometry_Bracelet.stl Material: Tianse Red Copper PLA 1.75mm Final Size: 75.5mm x 18.0mm x 59.2mm Print Date: 2018/01/13 Print Time: Estimated Print Time: 4 hours 39 minutes Estimated Filament: 3.4 meters Slicer: Cura 3 Slicer Settings:
- 0.06mm layers
- 20% infill
- supports
Statues for kelly's birthday:
- aeschylus? - pearl pro pla
- moai head
Models:
- Wood Harvested
https://www.thingiverse.com/thing:1132283/#files
Attempts 1, 2, 3: https://www.instagram.com/p/BdijZuiAQPt/?taken-by=dwyerdevices
Attempt 4: https://www.instagram.com/p/BdjD2yVABwl/?taken-by=dwyerdevices
Cura .2 v .15: https://www.instagram.com/p/BdjESeDALgM/?taken-by=dwyerdevices
Sheep: https://www.instagram.com/p/Bdkq1Z0AiS6/?taken-by=dwyerdevices
Failure. Great base and pedestal, but the trees and wood hut were a mess.
0.15mm layers 15% infill No Brim 2018/01/03 Est P: 2 hours 53 minutes Est F: 6 meters Act P: 3 hours ? minutes Slicer: Slic3r
Failure. Still good base and pedestal, still a mess in the trees...
0.20mm layers 50% infill 2018/01/04 no brim detect thin walls extra perimters if needed Est P: 2 hours 34 minutes Est F: 7.3 meters Act P: Slicer: Slic3r
Gorgeous print, trying it at 0.15mm layers to see if it gets better.
0.20mm layers 50% infill 2018/01/04 no brim no supports Est P: 2 hours 34 minutes Est F: 7.3 meters Act P: Slicer: Cura 3
Wood Harvested:
0.15mm layers 50% infill 2018/01/04 no brim no supports Est P: 3 hours 20 minutes Est F: 7.6 meters Act P: Slicer: Cura 3
Sheep 1:
Est P: 2 hours 18 minutes Est F: 6.5 meters Act P: 2 hours
https://www.thingiverse.com/thing:1238980
Wool 1: https://www.instagram.com/p/Bdk20mQAlQ5/?taken-by=dwyerdevices
Wool 1:
0.15mm layers 50% infill 2018/01/05 no brim no supports Est P: 3 hours 18 minutes Est F: 11.4 meters Act P: Slicer: Cura 3
Ore 1:
0.15mm layers 20% infill 2018/01/07 no brim no supports Est P: 3 hours 25 minutes Est F: 9.6 meters Act P: 3 hours 12 minutes Slicer: Cura 3
Interlocking version of the Magnetic catan tiles
https://www.thingiverse.com/thing:2035221
Wool 1: https://www.instagram.com/p/BdlOPUOA9DL/?taken-by=dwyerdevices
Warping: https://www.instagram.com/p/BdnG3SBAQ87/?taken-by=dwyerdevices
Wool 2:
0.15mm layers 50% infill 2018/01/05 no brim no supports Est P: 3 hours 14 minutes Est F: 11.5 meters Act P: Slicer: Cura 3
Wood 1:
2018/01/05 Est P: 4 hours 25 minutes Est F: 12.5 meters Act P:
Wood 2:
2018/01/06 Est P: 3 hours 39 minutes Est F: 7.8 meters Act P:
Support from build plate 20% infill 0.15mm layers
Tiles: https://www.thingiverse.com/thing:2035221
Borders: http://www.thingiverse.com/thing:2133068
Tile Storage: http://www.thingiverse.com/thing:2084410
Print Date: 2018/01/06 -
Tiles:
- Wood 1: 1
- Wood 2: 1
- Wood 3: 1
- Wool 1:
- Wool 2:
- Wool w/River:
Est P:
- Wood 1: 3 hours 33 minutes
- Wood 2: 3 hours 39 minutes
- Wood 3: 3 hours 39 minutes
- Wool 1:
- Wool 2:
- Wool w/River: 2 hours 33 minutes
Act P:
- Wood 1:
- Wood 2: 3 hours 41 minutes
- Wood 3:
- Wool 1:
- Wool 2:
- Wool w/River:
Est F:
- Wood 1: 7.7 meters
- Wood 2: 7.8 meters
- Wood 3: 7.8 meters
- Wool 1:
- Wool 2:
- Wool w/River: 6.5 meters
Wood: 4 Wool: 4 Wheat: 4 Brick: 3 Ore: 3 Desert: 1 Water: 9 Harbor: 9 Port Markers: 1 (3:1), 1 (2:1) Tornado: 1 Per Player: Road: 15 Settlements: 5 Cities: 4 Road connection set: 1 Number Tokens: 18
Slicer Settings:
- 0.15mm layers
- 20% infill
- support from build plate
- brim: 8mm
The models of the RPG Tools Kickstarter have come through, and we're printing up as many as we can.
Post print halves: https://www.instagram.com/p/BdgNEn-gwKi/?taken-by=dwyerdevices
Cleaned up halves: https://www.instagram.com/p/BdgWVdjAVef/?taken-by=dwyerdevices
Leftovers: https://www.instagram.com/p/BdgWvQfAegv/?taken-by=dwyerdevices
Partial assembly: https://www.instagram.com/p/BeOyACygzCy/?taken-by=dwyerdevices
First Paint: https://www.instagram.com/p/Begmwv8gMlM/?taken-by=dwyerdevices
Source: RPGTools
Models:
- Base rear half
- Base front half
- Wing #2 - Left
- Wing #2 - Right
- Rear Turbine - Left
- Rear Turbine - Right
- Vertical Turbine
Print Time:
- Rear Half: 37 hours 19 minutes
- Front Half: 20 hours 22 minutes
- Rear propeller left: 4 hours 35 minutes
- Rear propeller right: 4 hours 39 minutes
- Wing left: 2 hours 52 minutes
- Wing right: 2 hours 53 minutes
- vertical turbine:
Estimated Print Time:
- Rear Half: 37 hours 30 minutes
- Front Half: 20 hours 56 minutes
- Rear propeller left: 4 hours 54 minutes
- Rear propeller right: 4 hours 58 minutes
- Wing left: 2 hours 58 minutes
- Wing right: 2 hours 58 minutes
- vertical turbine: 4 hours 50 minutes
Estimated Filament:
- Rear Half: 180.6 meters
- Front Half: 93.5 meters
- Rear propeller left: 14.2 meters
- Rear propeller right: 14.2 meters
- Wing left: 11.4 meters
- Wing right: 11.4 meters
- vertical turbine: 10.9 meters
Slicer: Cura 3
Slicer Settings:
- 0.15mm layers for body, propellers, vertical turbines
- 0.20mm layers for wings
- 20% infill
- supports
- no brim
Not yet printed
https://www.thingiverse.com/thing:330741/#files
https://www.thingiverse.com/thing:1811143/#files
Print: 2017/12/27 Est T: 8 hours 28 minutes Act T Est F: 49.3 meters
Slic3r 0.20mm layers 20% infill PLA
Source: Ghost in the Shell Logo Maker: TBRIshtar License: Creative Commons - Attribution Model: GITS_Logo.STL Material: Gizmodorks Translucent Blue PLA 1.75mm Print Date: 2017/12/04 Print Time: 4 hours 22 minutes Estimated Print Time: 4 hours 29 minutes Estimated Filament: 18.8 meters Slicer: PrusaControl Slicer Settings:
- PLA
- 20% infill
- 250% scale
- 0.20mm layers
- no brim
- no supports
!! First print failed when the printer wouldn't resume after pausing over night. Bed would heat up, but the hotend set itself for 0°.
!! Rescale
Source: Double Voronoi Bracelet License: Creative Commons - Attribution - Non-commercial - No Derivatives Maker: Protonik Model: dv3_protonik.stl Material: Inland Turquoise PLA 1.75mm Print Date: 2017/10/18 Print Time: Estimated Print Time: 7 hours 29 minutes Estimated Filament: 16.1 meters Slicer: Slic3r Slicer Settings:
- 0.20mm layers
- 10mm brim
- supports on build plate only
- 30% infill - cubic
What leads from the portal to the city?
Use RPG Tools Tiny Village pieces Use dock pieces
What do the adventurers need to do in the City in the Sky?
- Find a contact (who sends them astray) from the undermountain guild member
- Get ambused at the water market
- Get sent to the wrong back alley
- Figure out which guild is allied with the horrid dragon
- Sneak into the guild
- Steal the keystones that open the portal from the guild
- Discover that a guild master resides in the clock tower, and has a portal key
- Break into the clock tower (fight on the roof?)
- Steal back the portal stone
- Destroy the nest of flying creatures that will wreak havoc on the city
Canals held aloft on stone arch ways connect parts of the city.
At various points parts of the city just fall away to nothing, with only simple railings and barricades keeping the less wary adventurer from tipping over the edge.
The entry point from the magic circle into the City is hidden in an old courtyard bordering the edge of the city, with the facade of an old multi-storey building blocking the courtyard from the canalway.
A tile set of Canals - Embankments and water tiles that snap-fit to keep larger arrangements together more easily. This set builds on the smooth stone tiles of devonjones for the embankments. Mostly compatible with OpenForge.
https://www.instagram.com/p/Bc8bcybgpB8/?taken-by=dwyerdevices
For this tile set I wanted to transition from embankment to water partway through a tile square, with part of the tile filled with embankment, and part with water. The embankment tile corners and edges are designed with this in mind.
https://www.instagram.com/p/Bc8bDAbAhjj/?taken-by=dwyerdevices
https://www.instagram.com/p/Bc8bLWGgN4O/?taken-by=dwyerdevices
The embankment tiles have multiple snap fit points, so each tile is easy to fit into any arrangement of water. For bodies of water wider that 5 squares, or for joining multiple canals together, there are water tiles with snap fit connectors at a single end, so the end without a snap-fit connector can abut another water tile, or any other type of tile.
https://www.instagram.com/p/BcvbOw4Adfs/?taken-by=dwyerdevices
First version of the design has problems when fitting corners together - the overlaps just don't work:
https://www.instagram.com/p/BcjGKL3geLl/?taken-by=dwyerdevices
This design went through a fairly quick evolution, from a simple fit, to individual snap-fit guides, to the current snap-fit design:
https://www.instagram.com/p/Bcvaiyegy_G/?taken-by=dwyerdevices
I ended up with a snap-fit design that allows for water tiles to be fit in easily at any offset along the tile edge:
https://www.instagram.com/p/BdDhE-rA-jS/?taken-by=dwyerdevices
Sources:
- Canals Tile Set
- Embankment base stone tile:
- Source: OpenForge Smooth Floor Tile
- Maker: devonjones
- License: Creative Commons - Attribution - Share Alike
Licenses: Creative Commons - Attribution - Share Alike
Materials:
- Inland Egyptian Blue PLA 1.75mm
- Inland Gray PLA 1.75mm
Models:
Print Date: 2017/12/10 - 2017/12/20
Print Time:
- 2x1 smooth embankment: 34 minutes
- 2x2 smooth embankment: 1 hour 11 minutes
- 2x3 smooth embankment: 1 hour 36 minutes
- 2x4 smooth embankment: 2 hours 10 minutes
- 2x2 concave corner: 1 hour 10 minutes
- 2x2 concave corner B: 1 hour 11 minutes
- 3x3 concave corner: 2 hours 15 minutes
- 2x2 convex corner: 1 hour 3 minutes
- 3x3 convex corner: 2 hours 10 minutes
- 2x1 water: 53 minutes
- 2x2 water: 1 hour 10 minutes
- 2x3 water: 1 hour 37 minutes
- 2x4 water: 1 hour 57 minutes
- 2x5 water: 2 hours 20 minutes
- 2x1 water - single connector: 35 minutes
- 2x2 water - single connector: 1 hour 1 minute
- 2x3 water - single connector: 1 hour 22 minutes
- 2x4 water - single connector: 1 hour 45 minutes
- 2x5 water - single connector: 2 hours 3 minutes
- 2x2 water - no connectors: 49 minutes
- 3x3 water - no connectors: 1 hour 37 minutes
Estimated Print Time:
- 2x1 smooth embankment: 33 minutes
- 2x2 smooth embankment: 1 hour 9 minutes
- 2x3 smooth embankment: 1 hour 35 minutes
- 2x4 smooth embankment: 2 hours 5 minutes
- 2x2 concave corner: 1 hour 6 minutes
- 2x2 concave corner B: 1 hour 7 minutes
- 3x3 concave corner: 2 hours 7 minutes
- 2x2 convex corner: 59 minutes
- 3x3 convex corner: 2 hours 11 minutes
- 2x1 water: 50 minutes
- 2x2 water: 1 hour 10 minutes
- 2x3 water: 1 hour 33 minutes
- 2x4 water: 1 hour 54 minutes
- 2x5 water: 2 hours 14 minutes
- 2x1 water - single connector: 33 minutes
- 2x2 water - single connector: 58 minutes
- 2x3 water - single connector: 1 hour 17 minutes
- 2x4 water - single connector: 1 hour 41 minutes
- 2x5 water - single connector: 1 hour 58 minutes
- 2x2 water - no connectors: 40 minutes
- 3x3 water - no connectors: 1 hour 32 minutes
Estimated Filament:
- 2x1 smooth embankment: 2.2 meters
- 2x2 smooth embankment: 4.3 meters
- 2x3 smooth embankment: 6.4 meters
- 2x4 smooth embankment: 8.5 meters
- 2x2 concave corner: 4.5
- 2x2 concave corner B: 4.5 meters
- 3x3 concave corner: 8.9 meters
- 2x2 convex corner: 3.8 meters
- 3x3 convex corner: 9.1 meters
- 2x1 water: 3.1 meters
- 2x2 water: 4.4 meters
- 2x3 water: 5.7 meters
- 2x4 water: 7 meters
- 2x5 water: 8.3 meters
- 2x1 water - single connector: 2.1 meters
- 2x2 water - single connector: 3.5 meters
- 2x3 water - single connector: 4.8 meters
- 2x4 water - single connector: 6.1 meters
- 2x5 water - single connector: 7.4 meters
- 2x2 water - no connectors: 2.5 meters
- 3x3 water - no connectors: 5.8 meters
Slicer: PrusaControl
Slicer Settings:
- 0.20mm layers
- 20% infill
- no brim
- supports from bed only
What do the adventurers need to do in the undermountain?
- Get stuck in the portal room
- Happen upon a group coming back from the city in the sky
- Free the captive
- Help captive get to the dwarven stronghold gate to relay information critical to the dwarves survival
- Get tasked by the captive and dwarves to help rid the undermountain of the horrid dragon
- Get portal key from goblin wizard
- Cause havoc for goblins to evade possible trackers
- get sent to city in the sky with a tip on a contact
spiral staircase/landing
- RPGTools - Dungeon Filler F152 - Grand staircase
dwarven gates
Sources:
cavern river
Sources:
circular arena area for cages
Sources:
more walls more doors diagonal or cavern river more 2x2 or 2x4 stone
Sources:
Models:
- Smooth Square Door
- Smooth Square Door mirrored
- metal door 1 & 2
- door tab
- door tab mirrored
- 2x2 corner
- 2x2 wall
- 2x2 diagonal
Materials:
- Floors: Inland Silver PLA 1.75mm
- Doors: Inland Egyptian Blue PLA 1.75mm
- Corners: Inland Silver PLA 1.75mm
- Walls: Inland Silver PLA 1.75mm
Print Date: 2018/01/22 - 24 Print Time:
- Doorways (4x square doors): 5 hours 56 minutes
- Doors and tabs (x4): 2 hours 16 minutes
- diagonal half floor 2x2 (x8): 4 hours 2 minutes
- corner 2x2 (x4): 8 hours 20 minutes
- Wall 2x2 (x4): -
Estimated Print Time:
- Doorways (4x square doors): 6 hours 12 minutes
- Doors and tabs (x4): 2 hours 16 minutes
- diagonal half floor 2x2 (x8): 4 hours 8 minutes
- corner 2x2 (x4): 8 hours 38 minutes
- Wall 2x2 (x4): 6 hours 40 minutes
Estimated Filament:
- Doorways (4x square doors): 21 meters
- Doors and tabs (x4): 7 meters
- diagonal half floor 2x2 (x8): 15.2 meters
- corner 2x2 (x4): 34.5 meters
- Wall 2x2 (x4): 26.1 meters
Slicer: Cura Slicer Settings:
- 0.20mm layers
- 20% infill
- no supports
Medium/NPC Sized: 500% scale Large Sized: 1000% scale
https://www.instagram.com/p/BbcZqBVgI-v/?taken-by=dwyerdevices
Trying the medium and large at higher print quality - there aren't a ton of these, and they are some of the nicer decoration pieces, so it may be worth the time for the better detail of the smaller layers.
Copper version printed about 1/4 of the way before the spool got tangled, looks like the filament snapped under tension. grrr.
Source: Dwarven Paragon with Warhammer Maker: Wargaming_Miniature_Showcase License: Creative Commons - Attribution - Non-Commercial Model: dwarven_paragon_rev1_fixed.stl Materials:
- Inland Gray ABS 1.75mm
- Hatchbox Copper ABS 1.75mm
- Inland Gold ABS 1.75mm
Print Date: 2017/11/11 Print Time:
- Medium/NPC Sized @ 0.35mm: 20 minutes
- Medium/NPC Sized @ 0.20mm: 52 minutes
- Large Sized: 3 hours 40 minutes
Estimated Print Time:
- Medium/NPC Sized @ 0.35mm: 18 minutes
- Medium/NPC Sized @ 0.20mm: 36 minutes
- Large Sized: 2 hours 50 minutes
Estimated Filament:
- Medium/NPC Sized @ 0.35mm: 2.2 meters
- Medium/NPC Sized @ 0.20mm: 2.2 meters
- Large Sized: 11.9 meters
Slicer: Prusa Control Slicer Settings:
- 0.35mm layers for Medium / 0.20mm layers for Large
- 20% infill
- Supports from Build Plate Only
- Include Brim
- 500% Original Scale
I have quite a few of the pieces for this part of the dungeon already printed, but need to build out the flooring and the surrounds for each of the portals. The courtyard at the center of all of the portals is fairly large, at 12 x 12 squares. I'm going to attempt to fill it with 4x4 tiles, the largest ones I've printed yet.
4x4s: https://www.instagram.com/p/BbQaUfcgHUp/?taken-by=dwyerdevices
Sources:
Models:
Material: Inland Gray ABS 1.75mm
Print Time:
- smooth floor 4x4 (x9): 1 hour 56 minutes
- corridor 3x2 (x4): 1 hour 55 minutes
Estimated Print Time:
- smooth floor 4x4: 1 hour 50 minutes
- corridor 3x2: 1 hour 49 minutes
Estimated Filament:
- smooth floor 4x4: 20 meters
- corridor 3x2: 21.4 meters
Slicer: PrusaControl
Slicer Settings:
- 0.35mm layers
- 20% infill
- include brim
- no supports
Specified print temp: 210-230℃
Source: - License: - Print Date: 2017/10/23 Print Time: Estimated Print Time: 24 minutes Estimated Filament: 2.2 meters Material: Inland eLastic Blue 1.75mm Slicer: Slic3r Slicer Settings:
- Filament: Semiflex or Flexfill 98A (Flex - Shore A85 - A98 on PrusaControl)
- 0.35mm layers
- 10% infill cubic
- 10mm brim
- Octagram Spiral surface fill
Rotated Shapes
Make simple polyhedra and more complex shapes, rotate around Z, then rotate around X to create interesting complex polyhedra.
Glowing Obelisk
settlers interlocking tiles/board
Ruler v2:
- through hole ticks
- no bump outs
- more gap measures
- numeric through holes
- lengthen to 15cm
- dotted/dashed line through holes
Curves and Angles ruler
Printing small features bit:
- layers as multiples of min feature size
- dynamic layer sizing
- text and curves and segments
software engineering stencile
network design stencil
cloud computing stencil
stellated polyhedra
jewelry
letter form test
better spool holder
a one-size-fits-all holder with insertable rod?
Clip Case for CCG
Slide over case with two inserts that act as cotter pins